DSPPA DSP6050B 50W IP66 Outdoor Wall Speaker in Black
507.64ر.س
Product description
The DSPPA DSP6050B is a 50W outdoor wall speaker with a 6.5-inch woofer, a 1-inch tweeter, IP66 protection and up to 104dB SPL. Finished in black, it suits school yards, sports courts, warehouses and car parks where sound has to carry.
====
For open areas where sound has to reach the far end, the DSPPA DSP6050B delivers 50W through a 6.5-inch woofer and a 1-inch tweeter, all inside an IP66 cabinet. The black finish suits dark façades and the steel structures you find at sports grounds and warehouses. Maximum SPL is 104dB at 1m, higher than the DSP6020 and DSP6035 in the same family.
DSPPA DSP6050B specifications
- Rated power: 50W, also 50W in 8 ohm mode.
- Frequency response: 65Hz to 20kHz.
- Sensitivity: 87dB ±2dB at 1W/1m.
- Operating temperature: -20°C to +50°C.
- Size and weight: 300 x 200 x 233 mm, 4.3 kg per unit.
Five taps on a 100V line
Connected to a 100V amplifier, each DSP6050B can be set to 3.2, 6.3, 12.5, 25 or 50W. On 70V systems the taps are 1.5, 3.2, 6.3, 12.5 and 25W. Take a school yard as an example: speakers facing the assembly area run at 25W, while units near classroom windows sit at 6.3W so lessons are not disturbed.
Weather and dust resistance
IP66 means the cabinet is dust-tight and protected against powerful water jets, so dust storms, rain and hosing down the yard are not a problem. The grille is hardened 1060 aluminium treated against oxidation and deformation, the cabinet is engineering polymer, and the bracket is rust-resistant cast aluminium. The official operating range tops out at +50°C, so if the wall faces direct summer sun, choose a shaded position where possible.
Deeper sound for paging and music
The 6.5-inch polypropylene woofer runs on a large magnet, the tweeter has a silk diaphragm, and a passive radiator supports bass down to 65Hz. Announcements carry clearly across the yard, and music stays full during events and celebrations. The bracket tilts, so you can angle the speaker down toward the crowd when it is mounted high.
Where to install it in Saudi Arabia
- School yards: morning assembly and the school PA.
- Open sports courts and stadium concourses.
- Warehouse yards, factories and loading bays for staff paging.
- Car parks at malls and office buildings.
Sizing the amplifier
A mid-size school yard might take eight DSP6050B units. Set them all to the 25W tap and the load is 200W, so pick a 100V amplifier rated at 250W or more. A zoned amplifier lets you send assembly audio to the yard alone, or page every area at once. As a rule, keep about 20% headroom rather than running the amplifier at its full rating.
DSP6050B, DSP6050W or DSP6060?
The DSP6050B and DSP6050W are the same speaker with identical specifications; the only difference is colour, B for black and W for white. The DSP6060 steps up to 60W with an 8-inch woofer, reaching down to 55Hz and up to 106dB, but it measures 379 x 253 x 262 mm and weighs 6.5 kg. Choose the DSP6050B for high output in a smaller cabinet, and the DSP6060 for the largest spaces.
Frequently Asked Questions
What is the difference between the DSP6050B and DSP6050W?
None in sound, size or weight. The only difference is colour: the DSP6050B is black and the DSP6050W is white.
How many DSP6050B speakers can a 250W amplifier drive?
Add up the taps: five speakers at 50W, or ten at 25W, equal 250W. Leave some headroom rather than loading the amplifier to its full rating.
Will it survive dust and rain in an open yard?
Yes. It is IP66 rated, with an anti-oxidation aluminium grille and a cast aluminium bracket.
Specifications
- Model: DSP6050B (DSP6050 in black)
- Family: DSPPA outdoor wall speakers DSP6020 / DSP6035 / DSP6050 / DSP6060
- Speaker units: 6.5" woofer x1 + 1" tweeter x1
- Rated power: 50W
- 100V line taps: 3.2W, 6.3W, 12.5W, 25W, 50W
- 70V line taps: 1.5W, 3.2W, 6.3W, 12.5W, 25W
- 8 ohm mode: 50W
- Frequency response: 65Hz to 20kHz
- Sensitivity (1m, 1W): 87dB ±2dB
- Max SPL (1m): 104dB ±2dB
- Operating temperature: -20°C to +50°C
- Dimensions (H x W x D): 300 x 200 x 233 mm
- Net weight: 4.3 kg per unit
- Tweeter diaphragm: Natural silk membrane
- Ingress protection: IP66 (indoor and outdoor, all-weather design)
- Enclosure: Polymer engineering plastic
- Grille: 1060 pure aluminium, hardened, anti-oxidation treated
- Woofer diaphragm: Polypropylene with large magnetic circuit
- Passive radiator: Yes
- Mounting bracket: Rust-resistant cast aluminium, multi-angle adjustment
- Mounting: Wall mount
- Colour: Black
Features
- 50W with up to 104dB SPL: enough output to reach the far side of a yard or court.
- Five 100V taps from 3.2W to 50W: balance yard and corridor levels from one amplifier.
- 6.5-inch woofer, passive radiator, response from 65Hz: clear paging and full-bodied music at events.
- IP66 cabinet and cast aluminium bracket: stands up to dust storms, rain and yard wash-downs.
- Black finish: blends with dark façades and steel structures in stadiums and warehouses.
