DSPPA D1.2E XLR Female to XLR Male Lead for Wired Microphones

18.80

Product description


The DSPPA D1.2E is an XLR female to XLR male lead that links a wired microphone to the XLR input of a mixer or amplifier. It suits mosques, halls and meeting rooms.

====

The DSPPA D1.2E is the lead that runs from a wired microphone to a mixer or amplifier. The female XLR end plugs into the mic and the male end goes into the XLR input on the gear.

DSPPA D1.2E at a glance

  • Ends: XLR female on one side, XLR male on the other.
  • Job: carries the mic signal to the mixer or amplifier.

Where it goes

Between the imam's microphone on a mosque pulpit and the amplifier. Under a small meeting table where the mixer sits close by. Or on a school PA stage where the mic stand is right next to the rack. For runs longer than any ready-made lead, use D2X05 cable with D2C plugs.

Frequently Asked Questions

Does the D1.2E fit any wired mic?

It fits mics with an XLR output, which covers most pro microphones. Mics with a 6.35mm jack need a different lead.

Can I chain two D1.2E leads?

Yes, the male end of one plugs into the female end of the next. For long runs, one cable of the right length is the cleaner option.

Specifications

  • Model: D1.2E
  • Type: XLR female to XLR male lead
  • End 1: XLR female
  • End 2: XLR male

Features

  • XLR female end: plugs straight into the base of a wired microphone.
  • XLR male end: goes into the XLR mic input on a mixer or amplifier.
  • Ready-made DSPPA lead: no soldering or cable prep on site.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌