DSPPA DSP6011L 6.5-inch 8 Ohm Ceiling Speaker, 6W

37.47

Product description


The DSPPA DSP6011L is the 8 ohm member of the DSP6011 family, with a 6.5-inch driver, 6W rating and under 1.5% distortion. Wire it straight to a low-impedance amplifier in a villa majlis, a small shop or a meeting room.

====

The DSPPA DSP6011L is the 8 ohm version of the DSP6011 family: a 6.5-inch full-range ceiling speaker rated at 6W. It wires straight to a low-impedance amplifier, such as a stereo amp feeding a villa majlis, a small shop or a meeting room.

DSPPA DSP6011L specifications

From the product page and datasheet on DSPPA's official site:

  • Driver: 6.5-inch full range.
  • Rated power: 6W; impedance 8 ohms.
  • Sensitivity: 90dB at 1W/1m; maximum SPL: 97dB.
  • Frequency range: 110Hz to 15kHz; THD under 1.5% from 200Hz to 10kHz.
  • Cutout: 165 to 170mm; dimensions 190.5 × 70mm; weight 0.60kg.
  • Storage temperature: -25°C to +55°C.

8 ohm or 100V: which one do you need?

100V systems are designed for long cable runs and dozens of speakers across several zones. In a single room or a compact shop, a low-impedance amplifier gives simpler wiring. That is where the DSP6011L fits: connect it to an 8 ohm output directly, or run two in parallel on a channel rated for 4 ohms. The number of speakers per channel is limited by the lowest impedance the amplifier accepts, so for a large project spread over many rooms, the transformer-equipped DSP6011 is the better choice.

A practical example: a 6 × 8 meter majlis is usually well served by four DSP6011L speakers in the ceiling, two per channel on a stereo amplifier that accepts 4 ohms. Sound spreads evenly instead of coming from two floor speakers in the corners.

Clean sound, low-profile look

The magnet assembly is sealed in engineering plastic, and the carbon alloy aluminum grille has a thin edge, a flat face and an RAL white finish. Distortion stays below 1.5% across 200Hz to 10kHz, the range that carries the human voice and most background music, so long listening stays comfortable. DSPPA states that the materials are highly flame-retardant, that the speaker follows IEC 268-5, that it passed a 100-hour continuous run plus SAFE testing, and that it can briefly handle twice its rated power.

Quick fitting in ceilings of any thickness

The spring clips adjust to the ceiling thickness, from thin gypsum board to thicker panels. Per the datasheet, you cut a 165 to 170mm hole, set the clip height, connect the speaker cable, lift the clips, insert the speaker and let the clips grip the ceiling. DSPPA recommends gloves during installation.

Good fits in Saudi Arabia

  • Villa majlis rooms and istirahas: background music and recitation from a stereo amplifier.
  • Small shops and cafes.
  • Hotel rooms and meeting rooms.
  • Supermarkets and small leisure venues.

DSP6011L or DSP6011?

Both share the 6.5-inch driver, 6W rating, 90dB sensitivity, 110Hz to 15kHz response, 190.5 × 70mm size and 0.6kg weight. The difference is the wiring: the DSP6011 carries a 70V/100V transformer with 3W and 6W taps for large PA systems, while the DSP6011L is an 8 ohm unit with no line voltage listed, built for low-impedance amplifiers. For crisper treble with the same wiring, the DSP5211L is a 10W 8 ohm coaxial model.

Frequently Asked Questions

Does the DSP6011L work with a 100V amplifier?

The official specification lists 8 ohms and no 100V line rating, so it is meant for low-impedance amplifiers. For 100V systems, choose the DSP6011.

How many DSP6011L speakers can one amplifier channel drive?

One on an 8 ohm output, or two in parallel if the channel accepts 4 ohms. Check the minimum impedance of your amplifier.

What cutout does the DSP6011L need?

165 to 170mm, and the spring clips adjust to the ceiling thickness.

Specifications

  • Model: DSP6011L
  • Type: Frameless in-ceiling speaker
  • Speaker unit: 6.5 in × 1, full range
  • Rated power: 6W
  • Impedance: 8Ω
  • Sensitivity (1W/1m): 90 dB
  • Max SPL (1m): 97 dB
  • Effective frequency range: 110Hz to 15kHz
  • Distortion: THD < 1.5% (1W, 1m, 200Hz to 10kHz)
  • Cutout: Ø165 to Ø170 mm
  • Outline dimensions: 190.5 × 70 mm
  • Weight: 0.60 kg
  • Storage temperature: -25°C to +55°C
  • Materials: Carbon alloy aluminum grille with RAL white finish, magnet assembly sealed in engineering plastic, high flame-retardant materials
  • Power handling standard: IEC 268-5, 100-hour run and SAFE test
  • Mounting: In-ceiling, adjustable spring clips

Features

  • 8 ohm impedance: connects straight to a low-impedance amplifier output.
  • Under 1.5% THD from 200Hz to 10kHz: clean speech and music in majlis rooms and shops.
  • 90dB sensitivity and 97dB max SPL from 6W: enough level for a mid-size room from one speaker.
  • Adjustable spring clips: grips ceilings of different thicknesses in a 165 to 170mm cutout.
  • IEC 268-5 rated: 100 hours of continuous operation and SAFE testing, with short bursts at twice the rated power.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌