Huawei AP761 Outdoor Wi-Fi 6 Access Point, IP68, 1.775 Gbps

1185.27

Product description


The Huawei AP761 is an outdoor Wi-Fi 6 access point rated at 1.775 Gbps, with built-in directional antennas and a 180 m optimal signal distance. It suits farms, istirahas and warehouse yards that need long coverage in one direction, and adds an SFP fiber port and an IP68 housing.

====

The Huawei AP761 is an outdoor Wi-Fi 6 access point from the HUAWEI eKit range, rated at 1.775 Gbps and sealed to IP68. Its built-in directional antennas send the signal toward one area, and Huawei lists an optimal signal distance of 180 m. Mount it on a wall or a pole to bring Wi-Fi to a farm courtyard, a warehouse yard or a school playground.

Huawei AP761 specifications at a glance

Two radios work at the same time, each with 2x2 MIMO. The 2.4 GHz band reaches older devices and longer distances, while 5 GHz gives newer phones and laptops more speed.

  • Wi-Fi 6 (802.11ax) on both bands, AX1800 class, 1.775 Gbps combined device rate.
  • Channel width up to 40 MHz on 2.4 GHz and 80 MHz on 5 GHz.
  • Transmit power of 28 dBm on 2.4 GHz and 27 dBm on 5 GHz.
  • 120 recommended users, up to 1024 maximum.

Directional antennas for long, narrow spaces

Antenna gain is 10 dBi on 2.4 GHz and 11 dBi on 5 GHz. A directional pattern concentrates the signal in front of the unit instead of spreading it in every direction. That suits a long yard, a parking strip or a sports field covered from one side. Fixed to a perimeter wall, the AP761 points its coverage inward rather than wasting it on the street. A BLE radio (under 10 dBm, 5 dBi antenna) is built in as well.

Copper and fiber uplinks

The AP761 has one GE RJ45 port (10/100/1000M auto-sensing) and one GE SFP port. Power arrives over the RJ45 port using PoE 802.3at/af, and peak draw is 17.7 W, so one PoE+ switch port is enough. The SFP port matters when the access point sits more than 100 m from the network cabinet, as on large farms or logistics yards: run fiber, add a GE SFP module, and avoid placing an extra switch in the field.

Built for Saudi summers and dust storms

Operating temperature runs from -40°C to +65°C with 0% to 100% humidity, and the housing is IP68. The service port carries 6 kA common-mode surge protection, which helps on exposed poles. The unit weighs 1.91 kg and measures 69 x 200 x 200 mm.

Where the AP761 fits

  • Istirahas and farms: courtyard seating, pool and barbecue areas.
  • Warehouse yards and loading docks: handheld scanners and phones between gates.
  • School playgrounds and sports fields.
  • Parking areas at malls and residential compounds.

The eKit line and compatibility

HUAWEI eKit is the Huawei sub-brand built for the distribution channel and for small and medium businesses. It is separate from the AirEngine line used in large enterprise networks. The AP761 runs from any PoE switch that supports 802.3at or 802.3af.

AP761 or AP771?

The AP761 is Wi-Fi 6 at 1.775 Gbps with directional antennas (180 m), GE plus SFP ports, IP68 and up to 1024 users. The AP771 is Wi-Fi 7 at 3.57 Gbps with 130 m coverage, a single 2.5GE port, IP65 and up to 256 users. Choose the AP761 for long, one-direction coverage or a fiber uplink. Choose the AP771 when higher speed is the priority.

Frequently Asked Questions

Does the Huawei AP761 need a power adapter?

The official page lists PoE 802.3at/af as the only power input, with 17.7 W peak draw. Power it from a PoE+ switch port or a suitable PoE injector.

Can I connect it over fiber?

Yes. It has a GE SFP port, so you can add an SFP module that matches your fiber and place the AP more than 100 m from the network cabinet.

How many devices can the AP761 handle?

Huawei recommends 120 users, with a maximum of 1024 connected clients. For large outdoor crowds, plan for more than one unit.

Specifications

  • Model: AP761
  • Part number: 02355VFB
  • Product line: HUAWEI eKit (eKitEngine), Huawei's distribution and SME line
  • Type: Outdoor access point
  • Wi-Fi standard: Wi-Fi 6; 2.4 GHz: 802.11b/g/n/ax; 5 GHz: 802.11a/n/ac/ac Wave 2/ax
  • Radios: 2 (Radio 0: 2.4 GHz, Radio 1: 5 GHz)
  • Max channel bandwidth: 2.4 GHz: 40 MHz; 5 GHz: 80 MHz
  • MIMO spatial streams: 2.4 GHz: 2x2; 5 GHz: 2x2
  • Antenna type: Built-in directional antennas
  • Antenna gain: 2.4 GHz: 10 dBi; 5 GHz: 11 dBi; BLE: 5 dBi
  • Max transmit power: 2.4 GHz: 28 dBm combined (25 dBm/chain); 5 GHz: 27 dBm combined (24 dBm/chain); BLE: <10 dBm
  • Device rate: 1.775 Gbps
  • Recommended users: 120
  • Max access users: 1024
  • Optimal signal distance: 180 m
  • Bluetooth: Built-in BLE
  • Ports: 1x GE RJ45 (10/100/1000M auto-sensing); 1x GE SFP optical
  • Service port surge protection: 6 kA (common mode)
  • Power input: PoE 802.3at/af
  • Max power consumption: 17.7 W
  • Installation: Wall or pole
  • Dimensions without packaging (H x W x D): 69 x 200 x 200 mm
  • Weight without packaging: 1.91 kg
  • Operating temperature: -40°C to +65°C (max derated 1°C per 300 m from 1800 m to 5000 m)
  • Operating humidity: 0% to 100% RH
  • Ingress protection: IP68

Features

  • Wi-Fi 6 at 1.775 Gbps: two 2x2 radios on 2.4 GHz and 5 GHz serve older devices and new phones at the same time.
  • Directional antennas with 10 dBi and 11 dBi gain: the signal is aimed at the yard or field, up to a 180 m optimal distance.
  • GE copper plus GE SFP fiber port: place the AP well beyond the 100 m copper limit by running fiber to it.
  • IP68 housing rated for -40°C to +65°C: handles dust, rain and summer heat on poles and perimeter walls.
  • PoE 802.3at/af with 17.7 W peak draw: a single PoE+ switch port powers it, no local socket needed.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌