DSPPA PL210S Passive Line Array Subwoofer, 18-inch, 1000W

3440.24

Product description


The DSPPA PL210S is a passive PL-series subwoofer with an 18-inch long-excursion driver, 1000W rated power and a 43Hz to 250Hz range at up to 126dB. It is built to work with PL210 modules in indoor theaters and event halls with live music.

====

The DSPPA PL210S is the higher-powered of the two PL-series subwoofers, the PL208S and PL210S, with 1000W rated power and an 18-inch long-excursion driver that reaches 43Hz. It is designed to work with PL210 full-range modules, handling everything from 43Hz to 250Hz so the tops can focus on vocals and instruments. Think theaters and indoor event halls with live music, where the audience should feel the kick drum in every seat.

DSPPA PL210S at a glance

Figures from the product page and datasheet on dsppatech.com:

  • Driver: 1 × 18-inch long-excursion woofer.
  • Rated power: 1000W at 8 ohms.
  • Frequency response: 43Hz to 250Hz (±3dB).
  • Sensitivity: 96dB (±2). Maximum SPL: 126dB (±2).
  • Size: 515 × 740 × 572 mm. Weight: 46 kg.

1000W for bass you can feel

The difference between a hall that sounds fine and one with real impact usually sits below 100Hz. An 18-inch long-excursion cone moves far more air than the 10-inch woofers in a full-range module, which is how the PL210S reaches 43Hz. With 126dB maximum SPL, its output stays in balance with PL210 modules even when a concert or stage show pushes the volume.

Cabinet and rigging

The cabinet is 740 mm wide, exactly the width of the PL210. Quick angle-adjustment hardware on both sides shortens rigging time. The enclosure is high-density plywood with a wear-resistant polyurea coating, and DSPPA rates it for indoor venues such as auditoriums and multi-purpose halls.

Use cases across the Kingdom

  • Indoor event and theater stages in Riyadh, Jeddah and Dammam.
  • Large wedding halls hosting folk bands and zaffa performances.
  • Covered sports halls and multi-purpose venues.
  • Exhibition and conference halls running video shows with sound effects.

Wiring and amplification

As a passive cabinet, the PL210S needs an external professional amplifier that handles an 8-ohm load at a level suited to its 1000W rating, plus a processor to set the crossover against the PL210 modules. Ground-stacking keeps 46 kg off the rigging point, while flying frees up stage space. How many subs to run per PL210 column is a call for your sound designer, based on room size and the kind of shows you host.

PL210S or PL208S?

Both use an 18-inch driver with 96dB sensitivity, but the PL210S does more: 1000W versus 800W, 43Hz versus 45Hz, and 126dB versus 125dB maximum SPL. Its cabinet is wider and shallower (515 × 740 × 572 mm, 46 kg), while the PL208S measures 539 × 655 × 650 mm and weighs 45 kg. If your system is built on PL210 modules, the PL210S is the matching sub.

Frequently Asked Questions

What is the power rating of the DSPPA PL210S?

1000W rated at 8 ohms, with 126dB (±2) maximum SPL and response down to 43Hz.

Does the PL210S need an external amplifier?

Yes. It is passive and needs a professional 8-ohm amplifier plus a processor to set the crossover with the PL210.

Specifications

  • Model: PL210S
  • Type: Passive line array subwoofer
  • System configuration: 1 × 18" LF (long-excursion)
  • Frequency response (±3dB): 43Hz - 250Hz
  • Sensitivity: 96dB ±2dB
  • Max SPL: 126dB ±2dB
  • Input impedance: 8Ω
  • Rated power: 1000W
  • Dimensions (H × W × D): 515 × 740 × 572 mm
  • Weight: 46 kg
  • Enclosure: Professional-grade high-density plywood with wear-resistant polyurea coating
  • Rigging: Quick angle-adjustment mechanisms on both sides for flying or stacking
  • Application: Indoor venues: auditoriums, multi-purpose halls

Features

  • 1000W rated power: 200W more than the PL208S, for shows that need bass you feel across the whole room.
  • 43Hz to 250Hz response (±3dB): very low extension for drums, bass lines and cinematic effects.
  • 126dB (±2) max SPL with 96dB sensitivity: low end that keeps up with PL210 modules at high volume.
  • 46 kg high-density plywood cabinet with polyurea coating: solid build for permanent indoor installs.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌