DSPPA DSP703 Coaxial Ceiling Speaker, 20W on 70V/100V Lines
195.27ر.س
Product description
The DSPPA DSP703 is a coaxial ceiling speaker with a 6.5-inch paper-cone woofer and a tweeter on the same axis, rated 20W on a 100V line and 10W on 70V. It suits hotels, offices and waiting areas that play background music and still need clear announcements.
====
Picture a hotel lobby where soft music plays all day and the front desk still needs to make the odd announcement. The DSPPA DSP703 is built for that mix: a coaxial ceiling speaker with a 6.5-inch woofer and a tweeter on the same axis, rated 20W on a 100V line. Offices, clinic waiting rooms and restaurants use it the same way.
DSPPA DSP703 at a glance
Figures from DSPPA's official product page and datasheet:
- Power: 20W on a 100V line, 10W on a 70V line.
- Frequency response: 60Hz to 18kHz.
- Sensitivity: 88dB ±2dB; maximum SPL 101dB ±2dB at 1m.
- Distortion: under 1.5% at 1W, 1m.
- Installation hole: 194-200mm; weight 1.8kg.
Why coaxial matters for background music
A single full-range cone has to cover every frequency, and the fine detail at the top end usually suffers. In the DSP703 the highs come from a dedicated tweeter in the centre, while the 6.5-inch paper cone handles the lows and mids. The result is clearer music and recitation, with response down to 60Hz for a fuller low end. With both drivers on one axis, the sound stays balanced whether you stand directly below the speaker or off to the side.
20W on a 100V line for bigger rooms
The built-in transformer lets you wire many speakers in parallel over long cable runs. Tap selection adds flexibility: 20W on 100V for large or busy halls, 10W on 70V for quiet offices and corridors. With 101dB maximum SPL, announcements still cut through a full restaurant or a crowded waiting area.
Typical projects in the Kingdom
DSPPA positions the DSP703 for background music and paging in hotels, schools, offices and factories. In Saudi Arabia that often means:
- Hotels in Makkah, Madinah and Riyadh: lobbies, restaurants and guest corridors.
- Offices and branches: soft music at reception plus staff paging.
- Clinics and hospitals: waiting areas and patient calling.
- Restaurants and cafes: even background music across the seating area.
Installation and amplifier matching
The ivory-white ABS housing resists warping and fading, and spring clips grip the ceiling board from behind. Drive it from an amplifier with a 70V or 100V line output. Ten speakers on the 20W tap add up to 200W, so a 250W amplifier leaves sensible headroom.
DSP703, DSP7011 or DSP8011?
The DSP703 is the only coaxial model of the three and the most powerful at 20W on 100V, though at 1.8kg it is also the heaviest. The DSP7011 is a 10W speech speaker with response from 120Hz and a smaller 165-170mm cutout. The DSP8011 gives 10W on 100V but has 94dB sensitivity and 104dB max SPL, and it fits ceilings or walls with a 208-215mm hole. Choose the DSP703 when music quality matters as much as paging.
Frequently Asked Questions
What does coaxial mean on the DSP703?
The tweeter for high frequencies sits in the centre of the 6.5-inch woofer on the same axis, giving clearer, more balanced sound for music.
What power does it give on a 70V line?
10W on 70V and 20W on 100V, according to the official datasheet.
What size hole does it need?
194-200mm. It fixes with spring clips and weighs 1.8kg, so make sure the ceiling board can carry it.
Specifications
- Model: DSP703
- Type: Coaxial in-ceiling speaker with built-in 70V/100V transformer
- Drive units: 6.5-inch paper-cone woofer + tweeter
- Rated power: 20W
- Rated voltage / taps: 70V: 10W; 100V: 20W
- Sensitivity (1W/1m): 88dB ±2dB
- Max SPL (1m): 101dB ±2dB
- Frequency response: 60Hz - 18kHz
- THD: <1.5% (1W, 1m, 100Hz-10kHz)
- Installation hole: Φ194 - Φ200mm
- Weight: 1.8kg
- Material and colour: ABS engineering plastic, ivory white
- Mounting: In-ceiling, spring clips
Features
- Coaxial 6.5-inch woofer plus tweeter: highs come from their own driver, so music sounds clearer than on speech-only speakers.
- 20W on 100V and 10W on 70V: more power for large halls and noisy areas.
- 60Hz-18kHz frequency response: a wider range for richer background music in lobbies and restaurants.
- 101dB max SPL and 88dB sensitivity: enough level to rise above waiting-room and restaurant noise.
- Spring-clip fixing in a 194-200mm hole: fast installation with no visible screws.
