Uniview NSW5130-8GT2GP-IN 8-Port Gigabit Managed Switch with 2 SFP

The Uniview NSW5130-8GT2GP-IN is a managed switch with eight Gigabit RJ45 ports, two SFP fiber ports and 20Gbps of switching capacity in a fanless case. It suits offices, branches and control rooms that need VLANs and traffic control for devices that already have their own power.

====

The Uniview NSW5130-8GT2GP-IN is a managed switch with eight Gigabit copper ports and two SFP fiber ports, and it has no cooling fan, so it stays silent in an office or meeting room. It is built for networks where the connected devices already have their own power: PCs, printers, NVRs, small servers and routers. Its 20Gbps switching capacity equals all ten Gigabit ports running full duplex together, so a fully loaded switch does not become a bottleneck.

Uniview NSW5130-8GT2GP-IN specifications

• 8 RJ45 ports at 10/100/1000Mbps.
• 2 SFP ports at 1000Mbps for fiber links.
• 14.88Mpps forwarding and an 8K MAC address table.
• 8W maximum power draw from a 100 to 240V AC supply.
• Fanless design rated for 0°C to 45°C.

Fiber uplinks for other floors and buildings

Copper Ethernet tops out at about 100 meters. When the switch sits on another floor, in a warehouse or in an annex away from the main building, fit a Gigabit SFP module and run fiber back to the core switch. Use the second SFP port as a backup path or to chain another switch. Because the NSW5130-8GT2GP-IN supports port aggregation along with STP, RSTP and MSTP, both links can stay up without creating a loop that takes the network down.

VLANs and traffic priority

You get 4K 802.1Q VLANs, so staff PCs, guest Wi-Fi and security devices can share one switch and still stay apart. VLANs can be assigned by MAC address, IP subnet or port, and QinQ and GVRP are supported.

On the QoS side, every port has 8 priority queues with classification by 802.1p, DSCP or TOS. In practice that means IP phone calls and camera streams move ahead of large file downloads.

Management and security

Configure the switch through its web interface, the CLI or SNMP, and send system and operation logs to a local buffer or a remote log server. A built-in temperature sensor raises a real-time alarm if the cabinet gets too hot.

Security features include MAC, 802.1x and Portal authentication, a set of ARP attack protections, port isolation, port security, broadcast storm suppression and SSH2.0 access. The switch can also act as a DHCP server, and DHCP snooping stops rogue devices from handing out wrong addresses.

Where it fits in Saudi Arabia

• Small offices and branches in Riyadh or Jeddah: staff PCs, the printer and the router in one cabinet.
• Warehouse control rooms: the NVR, video wall PC and supervisor workstation, with cameras on a separate PoE switch.
• Villas and istirahas with a distant annex: a fiber run from the main house through an SFP port.
• Meeting rooms and open-plan offices, where a fan would be heard all day.

NSW5130-8GT2GP-IN or the PoE model?

The NSW5130-8GT2GP-POE-IN has the same ports and the same 20Gbps capacity, but its eight copper ports also deliver power from a 125W PoE budget. It adds one cooling fan and weighs 1.8kg against 1.5kg for this model. Pick the NSW5130-8GT2GP-IN when your devices have their own adapters and you want a silent switch; pick the PoE version for cameras, access points or IP phones powered over the network cable.

Frequently Asked Questions

Does the NSW5130-8GT2GP-IN support PoE?

No. For powering cameras or access points over the network cable, choose the NSW5130-8GT2GP-POE-IN with its 125W PoE budget.

Is it a managed switch?

Yes. It is managed through a web interface, CLI or SNMP and supports 4K VLANs, 8-queue QoS per port and port aggregation.

Which SFP modules does it take?

The SFP ports run at 1000Mbps, so use Gigabit SFP modules that match your fiber type.

Specifications

• Model: NSW5130-8GT2GP-IN
• Category: Managed access switch
• Ports: 8× 10/100/1000Mbps RJ45, 2× 1000Mbps SFP
• Switching capacity: 20Gbps
• Forwarding performance: 14.88Mpps
• MAC table: 8K
• Max. power: 8W
• Power supply: AC 100 to 240V, 50/60Hz
• Cooling fans: 0 (fanless)
• Indicators: PWR, RUN, LINK/ACT
• Weight: 1.5kg
• Operating temperature: 0°C to 45°C
• Operating humidity: 5% to 95%, non-condensing
• MAC: Static, dynamic and black hole MAC entries; source MAC address filtering
• Ethernet: Port aggregation, port mirroring, RSPAN, port isolation, port traffic identification
• VLAN: 4K 802.1Q VLANs; VLAN by MAC, IP subnet, authentication policy or interface; GVRP; QinQ
• Maintenance: Real-time temperature detection and alarm; SNMP, CLI and web management; local and remote system, operation and debug logs
• Security: MAC, 802.1x and Portal authentication (local and centralized); dynamic ARP detection, one-click ARP binding, authorized ARP, ARP source suppression and source address inspection; port isolation and port security; broadcast storm suppression; SSH2.0
• QoS: 8 priority queues per port; classification by 802.1p/DSCP/TOS; port and flow rate limiting; SP, WRR and SP+WRR scheduling
• Reliability: STP, RSTP, MSTP
• DHCP: DHCP client, DHCP server, DHCP snooping
• Multicast: IGMP Snooping

Features

• 10 ports (8 Gigabit RJ45 + 2 SFP) with 20Gbps switching capacity: every port runs at full speed at the same time.
• 2 SFP ports at 1000Mbps: link another floor or a remote annex over fiber.
• No fan and 8W maximum draw: silent in an open office and cheap to run.
• 4K VLANs and 8 priority queues per port: isolate guests and prioritize voice and video.
• Web, CLI and SNMP management: watch port status and get real-time temperature alarms.