DSPPA MAG6835 IP Network Amplifier, 350W 100V in 1U
3952.21ر.س
Product description
The DSPPA MAG6835 delivers 350W on a 100V line from a 1U rack chassis and takes music and paging from the PA server over the network. It suits a full floor of a mall, hotel or hospital when 250W is not enough.
====
When a single floor of corridors or a large hall needs more than 250W, the DSPPA MAG6835 is the next step. It delivers 350W on a 100V speaker line from a 1U rack unit and receives music and paging from the PA server over Ethernet. Rather than a traditional amplifier in the control room feeding long audio runs, you place this unit in the rack closest to the speakers.
DSPPA MAG6835 performance
- Output: 350W, 100V constant-voltage, efficiency above 90%.
- Rated consumption: 440W from AC220V/50Hz.
- 100V output: 80Hz to 15kHz, distortion at or below 1%, SNR of at least 77dB.
- Network: LAN1 and LAN2, TCP/IP at 100/10 Mbps.
- Build: aluminum front panel, 1U high, 4kg net.
Front-panel control
The digital display shows the clock and playback progress. Eight buttons cover USB play, F1 to switch between AUX, MIC and MP3, Set to check or change the IP address, volume up and down, next, previous and play/pause. An IR receiver window lets you operate the unit with a remote without opening the rack. Six LEDs (Power, Net, Timing, Signal, CLIP and PROT) tell you whether the host is connected, whether the output is clipping and whether protection has tripped.
Keeps playing when the network does not
Connect the two LAN ports to two switches and the amplifier moves to the healthy link when one fails. Lose the server entirely and it still plays the timing points stored on its SD card. It also reads MP3 files from a USB stick or a Micro SD card of up to 32GB, so background music in the corridors carries on.
Where the MAG6835 fits in Saudi Arabia
- Malls: a full floor of shops and walkways with background music and customer announcements.
- Hotels in Makkah and Madinah: guest corridors and lobbies, with paging taking priority over music.
- Hospitals: waiting areas and corridors, with a local microphone at reception.
- Residential compounds and towers: parking, entrances and shared spaces.
Compatibility and expansion
The MAG6835 belongs to DSPPA's MAG6000 IP network PA system and is managed by the system host and its software. It works with any network switch and with ceiling, wall, column and horn speakers rated for 100V. On the back you will find a 100V input for a backup amplifier, a 24V EMC override output and an expansion port for accessories such as an intercom panel or Bluetooth.
MAG6835, MAG6825 or MAG6835A?
Against the MAG6825: same chassis, ports and 4kg weight; only power (350W vs 250W) and consumption (440W vs 340W) change. Against the MAG6835A: same 350W, but the A model carries main/standby switchover in its name, adds a DC24V backup power output and a link to the MAG6402 display terminal, uses a 1000mV AUX input instead of 350mV, and is 345mm deep with a 4.5kg net weight. If you need more than 350W, move to the 500W MAG6850.
Frequently Asked Questions
Can I control the DSPPA MAG6835 by remote?
Yes. The front panel has an IR receiver window as well as 8 buttons and a digital display.
How is it different from the MAG6825?
Only power: 350W versus 250W, with 440W versus 340W consumption. Chassis, ports and weight are the same.
Will it work with my existing speakers?
Yes, if they are 100V speakers and their combined taps stay within 350W.
Specifications
- Model: MAG6835
- Type: 1U rack IP network amplifier (MAG6000 system)
- Rated output: 350W, 100V constant-voltage output
- Amplifier efficiency: Above 90%
- Network: LAN1 and LAN2, TCP/IP 100/10 Mbps auto-adaptive, dual-network redundancy with line fault detection and automatic switching
- AUX IN: Sensitivity 350mV ±50mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- AUX OUT: 1000mV ±100mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥75dB
- MIC IN: Sensitivity 5mV ±1mV, 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥71dB
- USB/SD/NET playback (MP3): 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- 100V output: 80Hz–15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- SD card / USB drive capacity: Up to 32GB each (Micro SD slot, USB port)
- Rear panel: LAN1/LAN2, AUX IN, AUX OUT, MIC input, USB, Micro SD, 100V OUT, EMC override output (24V and dry contact), 100V backup input, expansion port, fan port, power inlet with fuse holder
- Front panel: Digital display (clock and playback progress), IR receiver window, Power/Net/Timing/Signal/CLIP/PROT LEDs, 8 control buttons
- Protection: Over-current, overheat, over-voltage; watchdog function
- Rated power consumption: 440W
- Power supply: AC220V/50Hz
- Net weight: 4kg
Features
- 350W on a 100V output in just 1U: high power without eating rack space.
- Dual 100/10 Mbps network links: the amplifier fails over if a cable or switch goes down.
- 8 front buttons, digital display and IR window: set volume, source and IP locally or by remote.
- MP3 player with USB and Micro SD up to 32GB: local background music even when the server is busy or offline.
- Over-current, overheat and over-voltage protection with a PROT LED: a speaker-line short shows up at once.
