DSPPA DSP602BT Active Ceiling Speaker, 2×10W

377.17

Product description


The DSPPA DSP602BT is an active ceiling speaker rated 2×10W, meaning the amplifier is built in and no separate amp is needed. It suits majlis rooms, clinics, offices and small shops that want quiet background music with a simple install.

====

The DSPPA DSP602BT is an active ceiling speaker rated 2×10W, which means the amplifier is built in and there is no separate amp to mount in a rack. It is aimed at small and mid-size rooms that want simple background music without a central amplifier and 100V speaker lines.

DSPPA DSP602BT specifications

  • Type: active ceiling speaker with a built-in amplifier.
  • Output: 2×10W.
  • Brand: DSPPA, the Chinese maker of public address and commercial audio systems.

Active versus standard ceiling speakers

Most ceiling speakers in shops, schools and mosques are passive. They take power from a central amplifier over a 100V line, which means a rack, an amplifier and cabling for every zone. An active speaker carries its own amplifier, so it needs only power and an audio source. The result is a faster, cheaper install in small spaces, traded against limited output that will not fill a large hall or run building-wide paging.

What 2×10W output suits

That output suits quiet background music or low-level recitation in a living room, office or small shop. It is not meant for big halls or busy venues that need high volume.

Where it fits in Saudi Arabia

  • Majlis and living rooms in villas and istirahas.
  • Clinics and waiting areas.
  • Small perfume, clothing and gift shops.
  • Meeting rooms and admin offices.
  • Barber shops and beauty salons.

Installation and wiring

Active ceiling speakers usually sit in a round gypsum cut-out, held by rear clamps or springs. Because the amplifier is inside, plan a power point or adapter above the ceiling and a cable route to the second speaker if there is one, and agree these with the installer before the ceiling is closed.

Check these points before ordering

Confirm the following before you order so installation day holds no surprises:

  • Audio source: Bluetooth, a wired input, or both.
  • Power: external adapter or direct 220V mains, and where the adapter sits above the ceiling.
  • Cut-out size and speaker depth, so the installer cuts the gypsum correctly.
  • Pack contents: one speaker, or two with a connecting cable.

DSP602BT or DW2230?

The DSP602BT is rated 2×10W and suits a small room. The DW2230 delivers 30W×2 on PoE++ or 50W×2 with a 24V adapter, with WiFi, AirPlay and DLNA, Bluetooth 5.0, a 6.5-inch woofer with a 1-inch tweeter, and support for up to three DW2230S slaves. Choose the DW2230 when you need more volume, network control or multi-room playback.

Frequently Asked Questions

Does the DSPPA DSP602BT need an amplifier?

No. It is an active speaker with a built-in 2×10W amplifier.

Is it suitable for a large hall or mosque?

No. 2×10W suits small to mid-size rooms. For large spaces, use a central amplifier with 100V ceiling speakers.

Specifications

  • Model: DSP602BT
  • Brand: DSPPA
  • Type: Active ceiling speaker with built-in amplifier
  • Output power: 2×10W

Features

  • 2×10W output: enough for quiet background music in a small to mid-size room.
  • Built-in amplifier (active): no rack, no central amplifier, no 100V line.
  • Flush ceiling mounting: hidden in the false ceiling, taking no wall or floor space.
  • Lower cabling cost than a 100V system: a practical choice for a single room or small shop.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌