DSPPA DW2230 WiFi Active Ceiling Speaker, 2×30W with PoE++

1150.32

Product description


The DSPPA DW2230 is the master unit of the DW2230 system: a 6.5-inch ceiling speaker with a built-in 30W×2 digital amplifier and a streamer for AirPlay, DLNA and Bluetooth 5.0. It suits cafes, showrooms and villas that want background music over one network cable, with no separate amplifier.

====

The DSPPA DW2230 is the master speaker of the DW2230 ceiling system, with a digital amplifier and a music streamer built into the speaker itself. Run one network cable to it, let PoE++ carry the power, and play music from your phone over WiFi or Bluetooth. There is no separate amplifier and no rack. It is a tidy fit for cafes, restaurants, showrooms and villas that want clean background music with minimal cabling.

DSPPA DW2230 key specs

The driver is a two-way design: a 6.5-inch woofer for lows and mids and a 1-inch tweeter for highs, split by a tuned crossover.

  • Output: 30W×2 on PoE++, 50W×2 with an optional 24V DC adapter.
  • Frequency response 55Hz to 22kHz, sensitivity 88dB.
  • Network: 10/100Mbps RJ45 plus 802.11b/g/n WiFi on 2.4GHz.
  • Inputs: Bluetooth 5.0 and AUX.

Power and audio over a single cable

The biggest saving is in the installation. Power arrives over IEEE 802.3bt PoE++, so one Cat cable from a compatible switch to the ceiling cut-out delivers both electricity and the stream. No PoE++ switch on site? Use a 24V DC 5A adapter instead, which also lifts output to 50W per channel.

Sources and app control

Stream to the speaker over WiFi or wired LAN using AirPlay, DLNA or QPlay, pair a phone directly over Bluetooth 5.0, or plug a wired source into AUX. You pick the source in the mobile app. Supported formats include MP3, AAC, FLAC, ALAC, WMA, APE, WAV and OGG, with services such as TuneIn, TIDAL and Qobuz. Output is 24-bit/48kHz.

Stereo pairs and multi-room

An amplifier output on the master drives a DW2230S slave, giving you a left/right stereo pair at 60W total. DSPPA states one master can run up to three slaves. Put several masters on the same network and you can play the same track everywhere or different music in each room. A separate subwoofer output is also provided.

Where it fits in Saudi Arabia

  • Cafes and restaurants in Riyadh and Jeddah: music from the ceiling with no amplifier on show behind the counter.
  • Mall showrooms and retail stores: an all-day playlist controlled from the manager's phone.
  • Villas and majlis rooms: a stereo pair in a living room or annex, run from a phone.
  • Gyms and small meeting rooms.

Ceiling installation

The speaker is 220mm in diameter, needs a 205mm cut-out and 115mm of depth, and weighs 1.5kg. A 4-prong rotating bracket clamps it to the gypsum board. The panel and rear shell are ABS, and the white iron grille sits in a narrow bezel.

DW2230 or DW2230S?

The DW2230 is the smart unit: it holds the WiFi, Bluetooth, network port and amplifier, and works on its own. The DW2230S is a passive slave with no network or amplifier; it takes audio and power from the DW2230, is 87mm deep and weighs 1.2kg. Start with one DW2230 per zone, then add a DW2230S for stereo or wider coverage.

Frequently Asked Questions

Does the DSPPA DW2230 need a separate amplifier?

No. The amplifier is built in: 30W×2 on PoE++, or 50W×2 with an optional 24V DC adapter.

Will a standard PoE switch power it?

It needs a 48V PoE++ (IEEE 802.3bt) port. If your switch lacks one, use a 24V DC 5A adapter.

How many slave speakers can I connect?

DSPPA states up to three DW2230S slaves per DW2230 master; one slave gives a 60W stereo pair.

Specifications

  • Model: DW2230 (master unit)
  • Speaker unit: 6.5" woofer ×1, 1" tweeter
  • Sensitivity (1W@1m): 88dB
  • Network interface: External standard RJ45, 10/100Mbps Ethernet
  • Wireless: 802.11b/g/n
  • Input power: 48V PoE++ or external 24V DC 5A supply (optional)
  • Operating voltage: 48V PoE++ (IEEE 802.3bt) or optional DC24V-5A adapter
  • Output power: 30W×2 (PoE++) or 50W×2 (DC, optional)
  • Pairing/reset button: Hold 5 seconds to restore factory settings
  • Local audio input: 200mVrms
  • Rated impedance: 8Ω
  • Audio input: BT 5.0, AUX IN
  • Network push: WiFi 2.4GHz and LAN
  • Streaming protocols: AirPlay, DLNA, QPlay, etc.
  • Audio formats: MP3/AAC/FLAC/ALAC/WMA/APE/WAV/OGG, etc.
  • Music sources: TuneIn, iHeartRadio, TIDAL, Napster, Qobuz, etc.
  • Frequency response: 55Hz - 22kHz
  • Material: Panel and rear shell: ABS; mesh: iron
  • Color: Unit: blue; frame: black; grille: white
  • Product dimensions: Φ220 × 110mm (H)
  • Cut-out: Φ205mm
  • Device depth: 115mm
  • Installation: 4-prong rotating mounting bracket
  • Net weight: 1.5kg

Features

  • One cable for power and audio: IEEE 802.3bt PoE++ input, so no mains point is needed in the ceiling.
  • 30W×2 on PoE++, or 50W×2 with an optional 24V DC adapter for larger spaces.
  • 3 audio sources (WiFi, Bluetooth 5.0, AUX), switched from the mobile app.
  • 6.5-inch woofer plus 1-inch tweeter with a crossover, 55Hz to 22kHz response.
  • Slave output for a DW2230S: a 60W stereo pair, and up to 3 slaves per master.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌