DSPPA MAG6850A 500W 1U IP Network Amplifier with Main/Standby Switchover
6257.28ر.س
Product description
The DSPPA MAG6850A is a 1U rack amplifier that receives audio from a DSPPA IP PA system over the LAN and drives 500W of 100V speakers. It fits schools, mosques and commercial complexes that need one large zone controlled from a central room.
====
The DSPPA MAG6850A sits between your PA control room and the speakers on site. It receives background music, live paging and alarm messages over the LAN, amplifies them and sends them down a 100V line at 500W. The chassis is 1U for rack mounting, and the unit belongs to DSPPA's A-type network amplifiers, whose official name includes main/standby switchover. It is a good match for a school, a large mosque or a shopping complex that wants one big zone run from a single room.
DSPPA MAG6850A key specifications
These figures come from DSPPA's official product page:
- 500W rated output on a 100V constant-voltage line.
- Digital amplifier module rated at 90% efficiency.
- 80Hz to 15kHz frequency response, distortion of 1% or less and SNR of at least 77dB on the 100V output.
- AC220V/50Hz supply with over-current, overheat and over-voltage protection.
- Unit size 483×345×45 mm.
Music, paging and alarms from the console
The amplifier plays whatever the PA console sends: background music, a page from the desk microphone or an alarm message. A digital screen on the front shows status and time, so a technician can confirm at a glance that the unit is online. You can set the priority order between the local mic, network audio and the AUX input, so a supervisor's voice automatically cuts over the music.
The official name lists main/standby switchover, and the product page adds a DC24V backup power output.
Local inputs and playback without a PC
The MAG6850A does not depend on the network alone. It has a 5mV microphone input for direct paging, an AUX input for an external player, an AUX output to feed a second amplifier when you need more power, and an EMC output. It plays MP3 files from a USB stick or SD card up to 32GB, and the built-in DSP adjusts bass and treble automatically. An IR remote handles local playback.
Typical sites in Saudi Arabia
- Schools: the courtyard and corridor zone for the morning assembly and scheduled class bells sent from the PA server.
- Large mosques: prayer hall and outdoor courtyard speakers on one 100V line.
- Malls and commercial complexes: background music in the walkways plus security calls and announcements.
- Warehouses: paging staff across open floor areas.
Works with the DSPPA MAG6000 IP PA system
DSPPA lists this model among the rack-mounted network amplifiers of its MAG6000 system and says it links with the MAG6402 display terminal and intercom panels. Connect 100V speakers totaling 500W or less.
MAG6850A, MAG6865A or MAG6850?
The MAG6850A delivers 500W and the MAG6865A 650W, in the same 483×345×45 mm chassis. The MAG6850 without the A also delivers 500W, but it is the standard version without switchover in its name, and its AUX input sensitivity is 350mV instead of 1000mV. Pick the MAG6850A when the zone's speakers add up to less than 500W and you want the A-type model.
Frequently Asked Questions
How many speakers can the DSPPA MAG6850A drive?
It depends on each speaker's tap setting. Keep the total load on the 100V line at 500W or less; for example, up to 50 ceiling speakers set at 10W.
Does it work without a PA server?
Yes for local sources: it plays MP3 files from USB or SD up to 32GB and accepts a mic or AUX source. Network streaming, scheduling and remote paging come from the PA server.
MAG6850A or MAG6850?
Both are 500W. The MAG6850A is the A-type model with main/standby switchover in its official name, a DC24V backup power output and a 1000mV AUX input, versus 350mV on the MAG6850.
Specifications
- Model: MAG6850A
- Type: 1U IP network amplifier with main/standby switchover
- Rated 100V output power: 500W
- Amplifier efficiency: 90% (digital amplifier module)
- AUX IN: Sensitivity 1000mV±50mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- AUX OUT: Rated output 1000mV±100mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥75dB
- MIC IN: Sensitivity 5mV±1mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥71dB
- USB/SD/NET MP3 playback: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- 100V output: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
- Inputs and outputs: 1× AUX in, 1× mic in, 1× AUX out, EMC output
- Local playback: USB port and SD slot, up to 32GB each
- Priority: Adjustable between mic, network audio and AUX
- Audio processing: Built-in DSP with automatic bass/treble adjustment
- Backup power output: DC24V
- Control: IR remote control; control from the PA console
- Display: Digital screen for status and time
- DSPPA accessories: Links with the MAG6402 display terminal and intercom panels
- Power supply: AC220V/50Hz
- Protection: Over-current, overheat and over-voltage
- Unit dimensions (L×W×H): 483×345×45 mm
Features
- 500W on a 100V line: enough for a large zone, as long as the connected speakers total no more than 500W.
- Adjustable priority between mic, network audio and AUX: you decide which source cuts in, so paging overrides music.
- USB and SD playback up to 32GB each: play local audio files straight from the amplifier, no PC needed.
- Built-in DSP with automatic bass and treble adjustment: clearer speech in corridors and halls without an external EQ.
- 90% efficient digital amplifier in a 1U chassis: takes one rack unit.
