Huawei S310-24P4X 24-Port PoE+ Switch with 400 W and 10G Uplinks

2197.27

Product description


The Huawei S310-24P4X is a managed PoE+ switch with 24 gigabit ports, 4 x 10GE SFP+ uplinks and a 400 W PoE budget. It suits offices, branches and small hotels that want to power IP phones, access points and cameras from a single rack.

====

The Huawei S310-24P4X is a managed PoE+ switch with 24 gigabit copper ports, 4 x 10GE SFP+ uplinks and a 400 W PoE budget. It powers IP phones, ceiling access points and IP cameras over the same Ethernet cable that carries their data, so there is no power adapter to fit at each device. It suits offices, branches and small hotels that keep their network gear in a single rack.

Huawei S310-24P4X key specs

  • 24 x 10/100/1000BASE-T ports, all PoE+ with up to 30 W per port.
  • 400 W total PoE budget.
  • 4 x 10GE SFP+ uplink ports.
  • Built-in AC power, 1U metal chassis only 220 mm deep, 2.92 kg.

Planning a 400 W PoE budget

Add up the draw of every device you plan to connect and keep the total under 400 W. If your devices average 15 W each, all 24 ports can be powered at 360 W combined. Heavier loads such as large access points or PTZ cameras take a bigger share, so check their spec sheets first. The S310 series also offers fast PoE, which starts powering devices within seconds of boot, and perpetual PoE, which keeps cameras and phones running while the switch restarts for a software upgrade.

10G uplinks and iStack

The four SFP+ ports link the switch to your core or router at 10G, enough for the traffic of 24 busy ports. As the network grows, iStack lets you combine several S310 switches and manage them as one device.

Managed from the Huawei eKit app

The S310 is part of Huawei eKit, the product line Huawei aims at small and mid-sized businesses. You can run it from the Huawei eKit mobile app or locally through the web interface, CLI and SNMP. A CLOUD LED on the front shows when the switch is cloud-managed, and the MODE button switches the port LEDs to show PoE status. Series features include:

  • Up to 4094 VLANs to keep cameras and phones off the staff network.
  • ARP and DoS attack defense plus 802.1X user authentication.
  • Eight QoS queues per port so voice calls get priority.

Note that power is built in: Huawei's hardware guide lists no redundant power supply or RPS option for this model.

Where it fits in Saudi Arabia

  • A 20-person office or branch: desk phones and ceiling APs from one switch.
  • A small hotel in Makkah or Madinah: one switch per floor feeding corridor access points.
  • A showroom or shop: security cameras and point-of-sale terminals on one network.
  • A clinic: reception phones, entrance cameras and Wi-Fi from the same rack.

S310-24P4X, S310-24PN4X or S310-24P4X-M?

All three have 24 PoE+ ports and four 10G uplinks. The S310-24PN4X upgrades the copper ports to 2.5G and raises switching capacity to 200 Gbps, which suits Wi-Fi 6 and Wi-Fi 7 access points with 2.5G uplinks. The S310-24P4X-M ships with a separate AC power module instead of a built-in supply. If your devices are gigabit, the S310-24P4X covers the job.

Frequently Asked Questions

How much PoE does the Huawei S310-24P4X deliver?

400 W in total, with up to 30 W on each of the 24 ports, per Huawei's hardware guide.

Does the S310-24P4X support a backup power supply?

No. Power is built in, and Huawei lists no redundant power or RPS support for this model.

Can I manage it from my phone?

Yes, through the Huawei eKit app; the front CLOUD LED shows the cloud connection state. Web, CLI and SNMP management are available too.

Specifications

  • Model: S310-24P4X (part number 98012382)
  • Series: Huawei eKit S310 (eKitEngine S310)
  • Ethernet ports: 24 × 10/100/1000BASE-T PoE+
  • Uplink ports: 4 × 10GE SFP+
  • PoE budget: 400 W total, up to 30 W per port
  • Other interfaces: RJ45 console port, MODE button, RST button (press to reboot, hold 6 s for factory reset), ground screw
  • Indicators: PWR, SYS, MST, PoE, CLOUD and port LEDs
  • Stacking: iStack supported on the S310 series
  • Power supply: Built-in AC, no redundant power
  • Rated input: AC: 100 to 240 V, 50/60 Hz; HVDC: 240 V
  • Input range: AC: 90 to 290 V, 45 to 65 Hz; HVDC: 190 to 290 V
  • Max input current: 6 A
  • Power consumption: Static 27.07 W; typical 37.12 W; max without PoE 44.35 W; max with full PoE 485.91 W
  • Heat dissipation: Typical 126.65 BTU/h; max 151.32 BTU/h without PoE, 1657.92 BTU/h with PoE
  • Cooling: 2 built-in fans with smart speed control; air in from left and front, out the right
  • Noise: Sound power 49.3 dB(A); sound pressure 37.3 dB(A)
  • Memory: 2 GB RAM; 1 GB flash
  • Dimensions (H × W × D): 43.6 × 442 × 220 mm (227 mm max)
  • Chassis: 1U metal
  • Weight: 2.92 kg unpackaged
  • Operating temperature: -5 to 50°C at 0 to 1800 m (cannot start below 0°C); max drops 1°C per 220 m above 1800 m
  • Storage temperature: -40 to 70°C
  • Humidity: 5% to 95% RH, non-condensing
  • Altitude: 0 to 5000 m
  • Surge protection: Service ports: ±7 kV common mode; power: ±6 kV differential and common mode
  • Ingress protection: IP20
  • Reliability: MTBF 60.18 years; availability above 0.99999
  • Not supported: Redundant power, RPS, management Ethernet port, USB, RTC
  • Software features: S310 series per Huawei datasheet: 16K MAC entries; 4094 VLANs with voice VLAN and MUX VLAN; static routing, PBR, OSPFv2, OSPFv3 (512 FIBv4, 512 FIBv6); ERPS (G.8032), Smart Link, STP/RSTP/MSTP; IGMP v1/v2/v3 and MLD snooping; LACP, VRRP, BFD, LLDP; 8 QoS queues per port; 802.1X, AAA, RADIUS, HWTACACS, DoS/ARP/ICMP attack defense; fast PoE and perpetual PoE
  • Management: Huawei eKit app (cloud management via NETCONF/YANG), web, CLI, Telnet, SSH v2.0, HTTPS, SNMPv1/v2c/v3, RMON
  • First software version: V600R023C00
  • AC cable locking strap: Not included

Features

  • 24 gigabit PoE+ ports with a 400 W budget: power cameras, APs and IP phones over Ethernet with no adapter at each device.
  • 4 x 10G SFP+ uplinks: a fast fiber link to the core or another switch with room for every port's traffic.
  • Huawei eKit app management and 4094 VLANs: set it up from your phone and keep cameras and phones off the staff network.
  • 1U chassis only 220 mm deep with two smart-speed fans: fits a small network rack at 37.3 dB(A) sound pressure.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌