DSPPA DSP602EN 6W EN54-24 Fireproof Ceiling Speaker
122.03ر.س
Product description
The DSPPA DSP602EN is an EN54-24 voice alarm ceiling speaker with a 6.5-inch full-range driver and 6W, 3W and 1.5W taps for 100V lines. It is made for corridors, rooms and offices in hotels, hospitals and commercial buildings that need indoor evacuation speakers.
====
The DSPPA DSP602EN is a ceiling speaker built for voice alarm, evacuation and public address systems, and it is certified to EN54-24:2008, the European standard for voice alarm loudspeakers in fire detection systems. Inside is a 6.5-inch (165 mm) full-range dual-cone driver fed by a 100V transformer with 6W, 3W and 1.5W taps. It is white and designed for false ceilings and gypsum boards.
DSPPA DSP602EN specifications
- Standard: EN54-24:2008, environment Type A (indoor).
- Power: 6W nominal, 12W music.
- Frequency response: 350Hz to 20kHz (-10dB).
- Sensitivity: 88dB (1W/1m); maximum SPL 96dB.
- Ingress protection: IP21C per EN60529.
- Size and weight: Ø190 mm x 108 mm deep, 1.0 kg.
What makes it an EN54 speaker
An evacuation speaker has to keep working while a fire develops. The DSP602EN body and its rear fire dome are moulded in ABS rated V0 for flame retardancy, and the front grille is painted aluminium. Wiring lands on a ceramic terminal block with a built-in thermal fuse, which DSPPA specifies for reliable operation under fire alarm conditions.
Tuned for speech, not bass
The response starts at 350Hz on purpose. This speaker is voiced for human speech and recorded messages, not for deep music. Coverage is 170° at 1kHz and 87° at 2kHz, and DSPPA states the polar pattern is the same horizontally and vertically, which makes spacing speakers along corridors and across rooms straightforward.
Installation and wiring
Fit it into a false ceiling or gypsum panel and loop the 100V line from speaker to speaker. Pick the tap by space: 1.5W for small rooms and offices, 3W for corridors, 6W for halls and larger open areas. Nominal impedance is about 1.66kΩ at 6W, 3.33kΩ at 3W and 6.66kΩ at 1.5W, which helps when you calculate the load on each amplifier zone. It works with any 100V line amplifier, including PAVA voice evacuation amplifiers.
Typical projects in Saudi Arabia
- Hotels in Makkah, Madinah and Riyadh: evacuation messages in corridors and guest rooms.
- Hospitals and clinics: daily paging and emergency messages through the same speakers.
- Malls and office towers: light background music and announcements alongside the fire alarm.
- Schools and universities: classroom and corridor coverage for the school PA.
Check your project specification and the relevant authority's requirements before you finalise speaker type and quantity.
Its role in a voice evacuation system
A voice evacuation system splits the building into zones, each with its own speaker line from the amplifier. That way an evacuation message can go to the affected floor first while the rest of the building keeps normal paging or music. The DSP602EN sits at the end of that chain, turning the 100V signal into clear speech in the room or corridor, so total the taps on each zone and leave headroom on the amplifier.
DSP602EN, DSP3254EN or DSP5311EN?
All three are DSPPA EN54 ceiling speakers. The DSP602EN delivers 6W through a 6.5-inch driver and suits corridors, rooms and offices. The DSP3254EN is listed by DSPPA at 10W, a better match for higher ceilings or noisier halls. Where there is no void above the ceiling for a recessed speaker, the DSP5311EN is DSPPA's 12W surface-mounted EN54 option.
Frequently Asked Questions
Is the DSP602EN certified for fire alarm systems?
DSPPA states it complies with EN54-24:2008 for voice alarm loudspeakers, environment Type A for indoor use.
What power taps does it have?
6W, 3W and 1.5W on a 100V line. Use 1.5W in small rooms, 3W in corridors and 6W in halls or larger spaces.
Can it be installed outdoors?
No. It is a Type A indoor speaker with an IP21C rating, designed for false ceilings and gypsum boards inside buildings.
Specifications
- Model: DSP602EN
- Standard: EN54-24:2008 (voice alarm loudspeakers for fire detection systems)
- Environment class: Type A, indoor
- Ingress protection (EN60529): IP21C
- Driver: 1-way dual cone full range, Ø165 mm (6.5")
- Transformer: 100V, 6W / 3W / 1.5W taps
- Power: 6W nominal / 12W music
- Frequency response (-10dB): 350Hz to 20kHz
- Sensitivity (1W, 1m): 88dB
- Max SPL (1m, Pmax): 96dB
- Coverage angle (-6dB): 281° @500Hz, 170° @1kHz, 87° @2kHz, 52° @4kHz, 30° @8kHz
- Directivity index (DI): 2.8dB @500Hz, 4.0dB @1kHz, 7.1dB @2kHz, 9.2dB @4kHz, 11.3dB @8kHz
- Directivity factor (Q): 1.9 @500Hz, 2.5 @1kHz, 5.1 @2kHz, 8.4 @4kHz, 13.6 @8kHz
- Nominal impedance (1kHz): approx. 1.66kΩ (6W), 3.33kΩ (3W), 6.66kΩ (1.5W)
- Dimensions: Ø190 x 108 mm (depth)
- Weight: 1.0 kg
- Material: ABS V0 body and fire dome, painted aluminium grille
- Colour: White
- Connection: Ceramic connector with thermal fuse
- Installation: False ceiling or gypsum board, daisy-chain wiring
Features
- EN54-24:2008, Type A: designed for indoor voice alarm and evacuation systems.
- ABS V0 body and fire dome, ceramic terminal and thermal fuse: flame-retardant build for fire conditions.
- Three 100V taps (6W, 3W, 1.5W): match the output to the size of each room or corridor.
- 6.5-inch dual-cone driver, 350Hz to 20kHz: tuned for clear speech and evacuation messages.
- 190 mm diameter, 108 mm deep, 1.0 kg: fits false ceilings and gypsum boards, supports daisy-chain wiring.
