DSPPA MAG6865 650W 1U IP Network Amplifier with Dual LAN Backup

5269.61

Product description


The DSPPA MAG6865 is a MAG68-series network amplifier that turns the PA server's stream into 650W on a 100V line, with two LAN ports for network redundancy. It suits schools, malls and plants where bells and paging cannot stop.

====

The DSPPA MAG6865 is built for sites where the sound cannot drop out. It connects to the network through two ports, so if a cable or switch fails it moves to the second path on its own, and it amplifies the stream to 650W on a 100V line. It belongs to DSPPA's 1U MAG68 series and runs inside the MAG6000 IP PA system. If the link to the PA server is lost completely, the schedule stored on its SD card keeps going.

DSPPA MAG6865 specifications

From DSPPA's official MAG68 series datasheet:

  • 650W rated output on a 100V line, amplifier efficiency above 90%.
  • 780W rated consumption, AC220V/50Hz supply.
  • Two 100/10Mbps network ports with line-fault detection.
  • 80Hz to 15kHz response, distortion of 1% or less, SNR of 77dB or more.
  • 4.8 kg net weight in a 483 mm wide 1U chassis.

Redundant networking and offline playback

LAN1 and LAN2 let you wire the amplifier to two different switches, and it works across network segments. DSPPA quotes boot time under 0.1 seconds, network connection under 2 seconds and live broadcast delay under 0.2 seconds, so a page reaches every zone at practically the same moment.

For schools the key feature is offline scheduling. Timing points are stored on a Micro SD card. If the server goes down in the morning, the class bell still rings on time. The amplifier also keeps its clock synchronized with the host.

Emergency inputs and priorities

The rear panel carries a 100V emergency input that accepts audio from another constant-voltage amplifier, plus two override outputs controlled by the host: EMC 24V and a dry contact, the kind of outputs normally used to bypass volume controllers during an alarm. Sources are ranked in 7 or more priority levels grouped as background, service and emergency. For local use there is a mic input for paging, AUX in, AUX out to feed another amplifier, and a USB port.

Where it fits in Saudi Arabia

  • Schools and universities: class bells and morning assembly, with the SD schedule as backup if the network fails.
  • Malls and office towers: one large ceiling-speaker zone, with security calls taking priority over music.
  • Factories and warehouses: staff paging across wide halls using horn speakers.
  • Hospitals: staff calls in corridors and waiting areas.

Compatibility and accessories

The MAG6865 works with DSPPA's MAG6000 IP PA system. Its expansion port accepts an 86-box on-demand color screen, a help intercom panel, a Bluetooth receiver and a GPS time module, and powers them directly. You can operate it with the IR remote or the eight front-panel buttons.

MAG6865, MAG6865A or MAG6895?

All three are 1U network amplifiers. The MAG6865A delivers the same 650W but is the A-type model with main/standby switchover in its name and a DC24V backup power output; its AUX input sensitivity is 1000mV instead of 350mV. The MAG6895 steps up to 1000W with 1300W consumption. Choose the MAG6865 when your speakers total up to 650W and you want dual network ports plus SD backup.

Frequently Asked Questions

What happens if the network fails on the DSPPA MAG6865?

If one port loses its link, the amplifier switches to the other automatically. If the host is unreachable, it runs the timing points stored on its Micro SD card.

What speaker load can it drive?

Up to 650W in total on the 100V line, for example 108 ceiling speakers tapped at 6W.

Specifications

  • Model: MAG6865
  • Series: MAG68 series 1U network amplifiers (MAG6000 system)
  • Rated 100V output power: 650W
  • Amplifier efficiency: Above 90%
  • Network: 2× LAN (LAN1/LAN2) 100/10Mbps, TCP/IP, line-fault detection with automatic path selection, works across network segments
  • AUX IN: Sensitivity 350mV±50mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • AUX OUT: Rated output 1000mV±100mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥75dB
  • MIC IN: Sensitivity 5mV±1mV, 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥71dB
  • USB/SD/NET MP3 playback: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • 100V output: 80Hz-15kHz (±3dB), distortion ≤1%, SNR ≥77dB
  • Audio decoding: 16-bit MP3/WMA/WAV/PCM up to 48kHz
  • Local storage: USB port and Micro SD slot, up to 32GB each
  • Rear panel: LAN1/LAN2, USB, Micro SD, AUX IN, MIC1 pickup window, MIC2 input, EMC override out, AUX OUT, expansion port, 100V backup input, 100V speaker output, fan, power inlet with fuse
  • Override outputs: EMC 24V and short-circuit dry contact
  • Expansion port: For 86-box on-demand color screen, help intercom panel, Bluetooth receiver, GPS time module and wireless remote; supplies DC power
  • Front panel: LED indicators, digital clock/progress display, 8 shortcut buttons, IR window
  • Source priority: 7 levels or more (background, service, emergency), set over the network
  • Boot / connect / latency: Boot <0.1s, network connection <2s, live broadcast delay <0.2s
  • Other functions: Clock sync with host, IR remote, watchdog, DSP bass/treble control
  • Rated power consumption: 780W
  • Power supply: AC220V/50Hz (rear label 2.5A)
  • Protection: Over-current, overheat and over-voltage
  • Net weight: 4.8 kg

Features

  • LAN1 and LAN2 ports at 100/10Mbps: if one network path fails, the amplifier switches to the other automatically.
  • 650W at 100V with over 90% efficiency: covers a large zone while keeping rack heat down.
  • Offline scheduled playback from Micro SD: class bells and programs keep running if the server link drops.
  • 100V emergency input plus two override outputs (EMC 24V and dry contact): accepts emergency audio from another amplifier, with outputs of the kind used to bypass volume controllers during an alarm.
  • Network source priority of 7 levels or more: emergency first, then service calls, then background music.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌