DSPPA DSP9134 4-Channel IP Network Audio Decoder with SIP

3098.53

Product description


The DSPPA DSP9134 is a 4-channel IP network terminal that receives network PA audio and passes it to your amplifier. It supports SIP and MP3/WAV, which suits a central equipment room in a hotel, school or mall.

====

The DSPPA DSP9134 packs four decoding channels into a single unit. It receives audio from a network PA system and passes it to the amplifier in your equipment room. It runs under the DSP9100 server in a DSP9000 system and is managed from the same PA software as every other endpoint.

DSPPA DSP9134 specifications

DSPPA lists the DSP9134 as a TCP/IP network player with separate IP control and audio input modules for independent decoding. It takes its address automatically over DHCP, so no manual IP setup is needed at installation.

  • 4 decoding channels.
  • 1.0V AUX input and a line output.
  • RJ45 10/100M network port.
  • DHCP, UDP, ICMP and IGMP (multicast).
  • MP3 and WAV.

SIP and multi-type broadcasting

The unit supports standard SIP and receives background, commercial and emergency audio from the PA management software. When a supervisor presses the paging key on a DSP9101 station, the announcement reaches the zones linked to this unit.

Typical Saudi projects

  • A hotel in Makkah or Riyadh: background music and pages from the central equipment room.
  • A school: admin announcements and emergency broadcasts over the school network.
  • A mall: background music and commercial announcements for entrances, food court and walkways.
  • A multi-storey office building: pages from a single comms room.
  • A hospital or clinic complex: pages to waiting areas and outpatient clinics.

Installing with your amplifier

Connect the line output to the amplifier input and leave the speakers and their cabling as they are; the upgrade happens at the amplifier in the equipment room. The 1.0V AUX input lets you add a source from the equipment room itself.

DSP9134 or DSP9131?

DSPPA publishes one spec table for both, with the same 1.0V AUX input and 10/100M network port. The DSP9134 has four decoding channels. The DSP9131 has one channel and adds an energy-saving mode that puts the amplifier on standby. If your zones are spread across separate buildings, several DSP9131 units make more sense.

Frequently Asked Questions

Does the DSP9134 need an amplifier?

Yes. It outputs line-level audio, so pair it with an amplifier that drives the speakers.

Does the DSP9134 have energy-saving mode?

No. The official page lists energy-saving mode for the single-channel DSP9131 only.

Specifications

  • Model: DSP9134
  • Type: IP network terminal (network audio decoder)
  • Channels: 4
  • Audio input: AUX input 1.0V
  • Audio output: Line out
  • Network interface: RJ45 (10/100M)
  • Supported protocols: DHCP, UDP, ICMP, IGMP (Multicast)
  • SIP: Standard SIP supported
  • Audio formats: MP3, WAV
  • Energy-saving mode: Not listed (single-channel DSP9131 only)

Features

  • 4 decoding channels in one unit: four channels instead of the single channel of the DSP9131.
  • Standard SIP plus IGMP multicast: receives streams and pages within network systems.
  • MP3/WAV playback and a 1.0V AUX input: add an external source in the equipment room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌