Huawei SFP-10G-LR-I 10G SFP+ Single-Mode Module for 10km Links
1231.27ر.س
Product description
The Huawei SFP-10G-LR-I is an SFP+ optical transceiver that carries 10G over single-mode fiber for up to 10km. Use it for uplinks between a core switch and buildings spread across a campus, warehouse yard or hospital site.
====
The Huawei SFP-10G-LR-I is an SFP+ optical transceiver that runs 10G over single-mode fiber for distances up to 10km. Plug it into an SFP+ port on your switch, connect the fiber with an LC patch cord, and you have a fast uplink between two buildings that sit far apart.
Huawei SFP-10G-LR-I key specs
- Form factor: SFP+
- Data rate: 10G
- Wavelength: 1310nm over single-mode fiber
- Reach: up to 10km
- Connector: LC
Typical links in Saudi Arabia
Picture a Dammam logistics yard where the dispatch building is 2km from the admin block. One module at each end links both switches at 10G. Hospital sites, residential compounds and university campuses in Riyadh and Jeddah use the same layout. Every link needs a matching pair, one module per fiber end.
Compatibility and product line
Huawei lists this module in its eKit portfolio, in the eKitEngine Optical Module Datasheet. Check your switch's supported-optics list before ordering.
SFP-10G-LR-I or SFP-GE-LX-SM1310?
Both are single-mode, 1310nm, 10km modules with LC connectors. The difference is speed and form factor: the SFP-10G-LR-I delivers 10G as an SFP+, while the SFP-GE-LX-SM1310 delivers 1G as an eSFP. For in-building multimode runs under 550m, the eSFP-GE-SX-MM850 is the better match.
Frequently Asked Questions
Do I need two modules to link two buildings?
Yes. Put an SFP-10G-LR-I at each end of the fiber; both ends must match in speed, fiber type and wavelength.
Will the SFP-10G-LR-I work on multimode fiber?
No. Huawei lists it as a single-mode 1310nm module. For 1G multimode runs inside a building, look at the eSFP-GE-SX-MM850.
Specifications
- Model: SFP-10G-LR-I
- Type: Optical transceiver
- Form factor: SFP+
- Data rate: 10G
- Fiber type: Single-mode
- Wavelength: 1310nm
- Maximum distance: 10 km
- Connector: LC
- Product line: Huawei eKit (listed in the Huawei eKitEngine Optical Module Datasheet)
Features
- 10G in an SFP+ form factor: turns an SFP+ switch port into a 10 Gbit/s uplink.
- Reach of up to 10km: one fiber run links buildings spread across a large site.
- Single-mode fiber at 1310nm: built for the fiber type used on long inter-building runs.
- LC connector: takes the standard LC patch cords found in racks and fiber panels.
- Listed in the Huawei eKitEngine Optical Module Datasheet: part of the official Huawei eKit portfolio.
