DSPPA DSP270E 50W PoE Horn Speaker with SIP Support
1395.70ر.س
Product description
The DSPPA DSP270E is a network horn speaker with a built-in amplifier that reaches 50W on PoE++ or 24V DC, with up to 121±3dB SPL and standard SIP support. It is made for yards, car parks, warehouses and school grounds where announcements must carry, all over a single network cable.
====
The DSPPA DSP270E is a network horn speaker for spaces a ceiling speaker cannot cover: a school yard, a mall car park, a high-bay warehouse. It reaches 50W on PoE++ and up to 121±3dB at one meter, all over one network cable that carries audio and power together. Standard SIP support means it receives broadcasts and calls from the LAN like any other SIP endpoint.
DSPPA DSP270E key specifications
- Rated power: 50W on PoE++ (802.3bt) or DC24V/2.5A, 15W on PoE+ (802.3at).
- Sensitivity: 106±3dB (1W, 1m).
- Maximum SPL: 121±3dB.
- Speaker frequency response: 300Hz to 5kHz.
- Network: 10/100M auto-sensing, DHCP or static IP.
- Audio formats: MP3, WAV and others.
Intelligible paging outdoors
Sound disperses fast in open areas, so the DSP270E concentrates on the speech band from 300Hz to 5kHz. Announcements stay understandable over traffic or forklift noise. A sensitivity of 106dB means more volume per watt, so fewer horns cover a larger site. Distortion stays at 1% or less, with a signal-to-noise ratio of 76dB or better.
SIP and single-cable installation
Because it speaks standard SIP, you can register the horn on a SIP-capable IP PBX or paging server and page it from a desk phone. It also plays background music, emergency paging and alarm signals from the system host. Power comes from the switch, so there is no need for a mains socket next to every horn on an outside wall or pole.
Typical uses in Saudi Arabia
- School yards and morning assembly: student calls and school broadcasts outside the classrooms.
- Warehouses and distribution centers: paging staff and drivers over equipment noise.
- Car parks at malls, compounds and towers: visitor announcements and traffic guidance.
- Factories and workshops: alerts and instructions for workers.
- Large rest houses (istirahas) and farms with network cabling: paging between buildings and courtyards.
Installation and power
The housing is ABS plastic, and DSPPA describes an all-weather design for indoor and outdoor use. Mounting brackets are included. The unit measures 410 x 270 x 372 mm. For the full 50W, use a PoE++ switch and check its total power budget, or add a DC24V/2.5A supply if your switch only offers PoE+.
DSP270E or the DSP168E ceiling speaker?
Both run on PoE+, PoE++ or 24V DC and deliver 15W on PoE+. The DSP270E is a 50W horn with 121dB maximum SPL, a 300Hz to 5kHz speech range, officially listed SIP support and a 2.5A DC requirement. The DSP168E is a 25W indoor ceiling speaker with a 44Hz to 20kHz range suited to music and a 2A DC requirement. Pick the DSP270E for yards, car parks and warehouses, and the DSP168E for offices and corridors. The MAG6311 and MAG6463B, by contrast, are AC-powered indoor speakers tied to the MAG6000 system.
Frequently Asked Questions
Does the DSP270E support SIP?
Yes. DSPPA lists standard SIP support, so it receives broadcasts and calls over the LAN.
Will it deliver 50W on a PoE+ switch?
No. On PoE+ it runs at 15W. For 50W you need a PoE++ (802.3bt) port or a DC24V/2.5A supply.
Can it be installed outdoors?
DSPPA describes an all-weather design for indoor and outdoor use, with mounting brackets included.
Specifications
- Model: DSP270E
- Type: PoE network horn speaker with built-in amplifier
- Power supply: PoE+ (802.3at), PoE++ (802.3bt) or DC24V/2.5A
- Rated power (RMS): 15W on PoE+, 50W on PoE++, 50W on DC24V
- Protocol: Standard SIP
- Network: 10/100M auto-sensing, DHCP or static IP
- Audio formats: MP3, WAV and others
- Acoustic sensitivity (1W/1m): 106±3dB
- Max SPL (1m): 121±3dB
- Acoustic frequency response: 300Hz-5kHz
- Amplifier frequency response (network playback): 80Hz-16kHz (±3dB)
- Playback sensitivity: -10dB
- Distortion: ≤1%
- SNR: ≥76dB
- Housing: ABS plastic
- Environment: All-weather design, indoor and outdoor
- Unit size (H × W × D): 410 × 270 × 372 mm
- Accessories: Mounting brackets
Features
- Up to 50W: on PoE++ (802.3bt) or DC24V/2.5A, with 15W available on PoE+ (802.3at) for smaller areas.
- Up to 121±3dB SPL and 106±3dB sensitivity: announcements reach the far end of yards and warehouses with fewer horns.
- Standard SIP: receives broadcasts and calls over the LAN, so it slots into network paging and intercom systems.
- 300Hz to 5kHz response: tuned to the speech band, so announcements stay clear in open, noisy spaces.
- All-weather ABS housing with mounting brackets included: rated by DSPPA for indoor and outdoor use.
