Huawei eSFP-GE-SX-MM850 Gigabit Multimode Module up to 550m
118.07ر.س
Product description
The Huawei eSFP-GE-SX-MM850 is an eSFP transceiver for 1G links over multimode fiber, with a reach of up to 0.55km. It is built for short in-building runs, such as floor racks back to the server room in hotels, office towers and schools.
====
In a hotel or office tower, the Huawei eSFP-GE-SX-MM850 links floor switches to the server room at 1G over multimode fiber, reaching up to 0.55km. It is an eSFP with an LC connector, designed for short runs inside a single building.
Huawei eSFP-GE-SX-MM850 at a glance
- Speed: 1G
- Form factor: eSFP
- Fiber: multimode at 850nm
- Reach: up to 0.55km (550m)
- Connector: LC
When to choose it
Take a 15-floor hotel in Makkah with a small rack on every floor holding a switch for access points and cameras. The vertical riser from the ground floor to the top stays under 550m, so this module at both ends of each link does the job. Schools and hospitals with racks inside one building work the same way.
eKit portfolio and compatibility
Huawei lists this module in its eKit portfolio, in the eKitEngine Optical Module Datasheet. Check your switch's supported-optics list before ordering.
eSFP-GE-SX-MM850 or SFP-GE-LX-SM1310?
Both run at 1G as eSFP modules with LC connectors. The difference is fiber and reach: the eSFP-GE-SX-MM850 uses multimode at 850nm up to 0.55km, while the SFP-GE-LX-SM1310 uses single-mode at 1310nm up to 10km. If your installed fiber is single-mode or the link crosses between buildings, pick the SFP-GE-LX-SM1310; for a 10G link, pick the SFP-10G-LR-I.
Frequently Asked Questions
Does the eSFP-GE-SX-MM850 work on single-mode fiber?
No. Huawei lists it as an 850nm multimode module. For single-mode fiber, use the SFP-GE-LX-SM1310.
How far can it reach?
Up to 0.55km (550m) according to Huawei's datasheet, which suits cabling inside one building.
How many modules does one link need?
Two: one in the floor switch and one in the core switch, both eSFP-GE-SX-MM850 on the same multimode fiber run.
Specifications
- Model: eSFP-GE-SX-MM850
- Type: Optical transceiver
- Form factor: eSFP
- Data rate: GE (1G)
- Fiber type: Multimode
- Wavelength: 850nm
- Maximum distance: 0.55 km
- Connector: LC
- Product line: Huawei eKit (listed in the Huawei eKitEngine Optical Module Datasheet)
Features
- 1G in an eSFP form factor: a Gigabit link from each floor switch to the core.
- Reach of up to 0.55km: enough for a full vertical riser in a hotel or office tower.
- Multimode fiber at 850nm: matches the multimode cabling common in indoor installs.
- LC connector: connects directly to LC patch cords in the rack.
- Listed in the Huawei eKitEngine Optical Module Datasheet: an official Huawei eKit part.
