DSPPA DSP9152 Stereo IP Network Amplifier, 120W

2014.49

Product description


The DSPPA DSP9152 is a 120W stereo amplifier that receives its audio over an IP network instead of a dedicated audio cable. It fits mid-size halls, hotel restaurants and waiting areas that need background music and paging from a remote control room.

====

The DSPPA DSP9152 is a 120W stereo amplifier that gets its programme audio from an IP network rather than from a dedicated audio cable. You install it close to the speakers in a hall or restaurant, and it receives music and announcements from the control room over the same LAN your computers and cameras already use. Two channels mean real left and right music, which suits mid-size spaces where sound quality is part of the guest experience.

DSPPA DSP9152 key specs

  • Output power: 120W stereo.
  • Channels: 2, stereo left and right.
  • Connection: audio over an IP network.

Network amplifier vs a traditional PA amplifier

A conventional PA system sends each zone out of the control room on its own cable, threaded through the building. A network amplifier flips that around. The amplifier lives next to its speakers and the audio reaches it digitally over Ethernet. Adding a new room later means one network point and one amplifier, not a fresh cable run from the rack room.

The stereo design matters most for background music. In a hotel restaurant or a lounge, guests notice the difference between music spread across both sides of the room and a flat mono feed coming out of every speaker the same way.

Where the DSP9152 works well in Saudi Arabia

  • Hotel restaurants and lobbies in Riyadh and Jeddah: soft music all day, with paging from the front desk.
  • School theatres and activity halls: one zone in a networked school PA system.
  • Corporate training and meeting rooms: separate audio per room from a single control point.
  • Cafes and shops inside malls: an independent sound zone linked to the central system over the network.
  • Clinics and medical centres: calm music in waiting areas and patient calls.

Before you order

Give the unit a well-ventilated spot close to a network point. Add up the rated power of every speaker you plan to connect and keep a safety margin below the amplifier's maximum, so it is not running flat out for hours. Match the speaker type to the amplifier output: mixing 100V line speakers with low-impedance speakers gives weak sound and can damage the unit.

DSP9152 or DSP9153?

The difference is power. The DSP9152 delivers 120W stereo and the DSP9153 delivers 250W stereo. Pick the DSP9152 for a mid-size room with a modest number of speakers, and the DSP9153 for large halls or when one unit has to drive more speakers.

Frequently Asked Questions

How powerful is the DSPPA DSP9152?

It is rated at 120W stereo across two channels.

Does it need an audio cable from the control room?

No. Audio arrives over the IP network, so a network point near the speakers is enough.

What is the difference between the DSP9152 and DSP9153?

Power: the DSP9152 is 120W stereo, while the DSP9153 is 250W stereo for larger spaces.

Specifications

  • Model: DSP9152
  • Type: Stereo IP network amplifier
  • Output power: 120W stereo
  • Channels: 2 (stereo)

Features

  • 120W across 2 stereo channels: left and right music for a mid-size hall or restaurant.
  • Audio arrives over the IP network: mount the unit beside the speakers and skip long audio runs from the control room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌