Huawei S310-24PN4X 24-Port 2.5G PoE+ Switch with 10G Uplinks

3285.93

Product description


The Huawei S310-24PN4X is a multi-gig switch in the eKit S310 family with 24 copper ports up to 2.5G, PoE+ on every port with a 400 W budget, 4 x 10G SFP+ uplinks and 200 Gbps switching. It suits offices and hotels deploying Wi-Fi 6 or Wi-Fi 7 access points with 2.5G uplinks.

====

The Huawei S310-24PN4X pairs 24 copper ports running at up to 2.5G, all with PoE+, with 4 x 10G SFP+ uplinks and a 400 W PoE budget. If you are rolling out Wi-Fi 6 or Wi-Fi 7 access points that have 2.5G uplink ports, this switch gives each one its full wired speed and powers it over the same cable. It is a good match for corporate offices, hotels and meeting venues upgrading their wireless network.

Huawei S310-24PN4X specifications

  • 24 x RJ45 ports at 10M/100M/1G/2.5G, all PoE+.
  • 400 W total PoE budget.
  • 4 x SFP+ ports at 10G or 1G.
  • 200 Gbps switching capacity and 144 Mpps forwarding rate.
  • iStack stacking with up to 4 switches of the same series.
  • Built-in AC power, plus support for 190 to 290 V high-voltage DC input.

Why 2.5G over copper

Modern Wi-Fi access points can move more data over the air than a single gigabit port can carry, which turns the Ethernet cable into the bottleneck. 2.5G ports remove that limit. The 2.5GBASE-T standard was designed to run over Cat5e and Cat6 cabling, so an upgrade often needs no new cable runs. The ports also drop back to 1G, 100M and 10M, so standard phones and cameras plug in without issue.

Power and cooling: plan your network room

Maximum draw is 77.7 W without PoE and 517.3 W with PoE fully loaded. Two fan modules adjust their speed automatically, pulling air in from the left and front and pushing it out the right. The chassis is 420 mm deep, so check your rack depth before ordering.

Managed through the Huawei eKit app

This switch is part of Huawei eKit, the line Huawei offers to small and mid-sized businesses. Manage it in the cloud from the Huawei eKit app, or locally through web, CLI and SNMP. The S310 series datasheet adds 4094 VLANs to split guest and staff Wi-Fi, static routing and OSPF, and perpetual PoE that keeps access points running while the switch reboots for a software upgrade.

Where it fits in Saudi Arabia

  • Corporate offices in Riyadh: ceiling-mounted Wi-Fi 7 APs, each on its own 2.5G link.
  • Hotels in Makkah and Madinah: dense coverage for corridors and lobbies during peak seasons.
  • Meeting and training rooms: dozens of wireless devices online at the same moment.
  • Design and engineering firms: workstations moving large files to a storage server.

S310-24PN4X or S310-24P4X?

Both offer 24 PoE+ ports, four 10G uplinks and a 400 W budget. The S310-24PN4X ports reach 2.5G against 1G on the S310-24P4X. In return, the S310-24P4X is lighter (2.92 kg against 4.71 kg) and shallower (220 mm against 420 mm). Choose the PN4X for 2.5G access points and the P4X when every device is gigabit.

Frequently Asked Questions

Do I need new cabling to use 2.5G on the S310-24PN4X?

Usually not. The 2.5GBASE-T standard was designed to run over Cat5e and Cat6, so most existing building cabling can be reused.

How much power does the Huawei S310-24PN4X use?

Per Huawei: 54.8 W typical, 77.7 W maximum without PoE and 517.3 W with PoE fully loaded.

Will gigabit devices work on it?

Yes. The ports support 10M, 100M, 1G and 2.5G, so IP phones and standard cameras work alongside 2.5G access points.

Specifications

  • Model: S310-24PN4X (part number 98012534)
  • Series: Huawei eKit S310 (eKitEngine S310)
  • Ethernet ports: 24 × RJ45 10M/100M/1G/2.5G with PoE+
  • Uplink ports: 4 × SFP+ 10G/1G
  • PoE budget: 400 W
  • Switching capacity: 200 Gbps
  • Packet forwarding rate: 144 Mpps
  • Stacking: iStack, up to 4 switches of the same series
  • Power supply: Built-in AC
  • Rated input: AC: 100 to 240 V, 50/60 Hz; HVDC: 240 V
  • Input range: AC: 90 to 290 V, 45 to 65 Hz; HVDC: 190 to 290 V
  • Surge protection (power): ±6 kV differential and common mode
  • Power consumption: Static 37.1 W; typical 54.8 W; max without PoE 77.70 W; max with full PoE 517.30 W
  • Cooling: 2 built-in fan modules with smart speed control; air in from left and front, out the right
  • Dimensions (H × W × D): 43.6 × 442 × 420 mm (446 mm max)
  • Weight: 4.71 kg unpackaged
  • Chassis and mounting: 1U metal chassis; rack or desktop mounting
  • Humidity: 5% to 95% RH, non-condensing
  • Certifications: EMC, safety, manufacturing
  • Software features: S310 series per Huawei datasheet: 16K MAC entries; 4094 VLANs with voice VLAN and MUX VLAN; static routing, PBR, OSPFv2, OSPFv3 (512 FIBv4, 512 FIBv6); ERPS (G.8032), Smart Link, STP/RSTP/MSTP; IGMP v1/v2/v3 and MLD snooping; LACP, VRRP, BFD, LLDP; 8 QoS queues per port; 802.1X, AAA, RADIUS, HWTACACS, DoS/ARP/ICMP attack defense; fast PoE and perpetual PoE
  • Management: Huawei eKit app (cloud management via NETCONF/YANG), web, CLI, Telnet, SSH v2.0, HTTPS, SNMPv1/v2c/v3, RMON

Features

  • 24 x 2.5G copper ports with PoE+: each Wi-Fi 6 or Wi-Fi 7 AP gets more than a gigabit plus power on one cable.
  • 400 W PoE budget: enough for 20 access points drawing 20 W each.
  • 200 Gbps switching and 144 Mpps forwarding: no internal bottleneck with every port running at 2.5G.
  • 4 x 10G SFP+ uplinks: a fiber path to the core with room for many 2.5G ports at once.
  • iStack with up to 4 switches: manage up to 96 x 2.5G ports as one device.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌