DSPPA D7101 Full Digital Conference System Host, up to 4096 Units
6730.84ر.س
Product description
The DSPPA D7101 is the host of DSPPA's networked conference system, managing up to 4096 units, 1 to 6 open microphones and 6 HDMI cameras that follow the active speaker. It suits boardrooms, university halls and council chambers that need structured discussion control.
====
The DSPPA D7101 is the host that runs DSPPA's full digital conference system. This 2U, 19-inch rack unit manages up to 4096 conference units on one system, carries uncompressed audio over the network, powers the units through the same cable and steers the room cameras toward whoever is speaking. It fits boardrooms, university halls and council chambers where the chair needs firm control over who speaks and when.
DSPPA D7101 capacity at a glance
DSPPA builds the D7101 on an ARM, FPGA and DSP platform that handles audio processing and network transport. The headline numbers:
- Up to 4096 conference units per system.
- Open microphone limit adjustable from 1 to 6.
- Up to 32 VIP units that can open outside the discussion-mode rules while fewer than 6 mics are on.
- 4.3-inch color touchscreen with a graphical interface.
- 50 Hz to 20 kHz frequency response and a signal-to-noise ratio of 80 dB or better.
Five discussion modes
Pick the mode on the touchscreen: FIFO, Normal, Voice control, Free and Apply. A formal board session suits Apply, where the chair approves each speaker; a workshop suits Free discussion. A speech timer with countdown caps every contribution, or you can switch the limit off. The host records the whole meeting automatically or on demand and keeps system, operation and unit logs for later review.
Automatic camera tracking and room integration
The rear panel carries six HDMI camera inputs, an HDMI video output and an RS-422 port for PTZ control. When a delegate opens a microphone, the picture cuts to that seat, on the room display or in a live stream, with no operator. An RS-232 port links to third-party central control, and two TCP/IP ports let you run the system from PC software.
Connections, power and protection
- 4 × 100 Mbps RJ45 ports with +48 V power for conference units.
- RCA AUX and RCA alarm inputs, plus two balanced XLR outputs to the room's sound system.
- +5 V alarm trigger that interrupts the meeting for an emergency message.
- Hot backup with a second host.
- All-metal chassis with ESD protection of 4 kV contact and 8 kV air.
Need more than four unit ports? Add the managed D7109 switch with eight PoE+ ports.
Where the D7101 fits in Saudi Arabia
Typical sites include boardrooms in Riyadh and Jeddah towers, municipal council and chamber of commerce halls, university lecture theaters and training centers, and large meeting rooms in Makkah and Madinah hotels. These rooms need a chair who controls the floor and an AV team that wants recording and camera switching handled by the system.
D7101 or the wireless D6850?
Both are 2U hosts with a 4.3-inch touchscreen; the difference is the link to the microphones. The D7101 is a wired network system for up to 4096 units, up to 6 open mics, five discussion modes and six cameras. The D6850 is a 2.4G wireless system for up to 255 units, 1 to 4 open mics and three modes. Choose the D7101 for large permanent rooms and the D6850 where running cable is difficult.
Frequently Asked Questions
How many microphones does the DSPPA D7101 support?
Up to 4096 conference units per system, with 1 to 6 microphones open at once and up to 32 VIP units.
Can the D7101 track the speaker with a camera?
Yes. It has six HDMI camera inputs and an RS-422 port for PTZ control, so the picture follows the active microphone.
Do I need a PoE switch with the D7101?
The host has four +48 V powered RJ45 ports. For more ports or a separate managed network, add the D7109 switch with eight PoE+ ports.
Specifications
- Model: D7101
- Type: Full digital conference system host
- Architecture: ARM + FPGA + DSP, uncompressed network audio
- Max conference units: 4096 per system
- Open microphone limit: 1 to 6
- VIP units: Up to 32
- Discussion modes: FIFO, Normal, Voice control, Free, Apply
- Display: 4.3-inch TFT color touchscreen
- Audio processing: Built-in DSP with low-cut filter and EQ
- Other functions: Auto/manual recording, unit detection, speech timer and countdown, scheduled restart, system/operation/unit logs
- Cameras: 6 HDMI camera inputs with auto tracking, HDMI video output, RS-422 camera control
- Central control: RS-232 port
- Unit ports: 4 × RJ45, 100 Mbps, +48 V powered
- Network ports: 2 × RJ45 TCP/IP for PC software control
- Audio inputs: RCA stereo AUX, RCA alarm input
- Audio outputs: 2 × balanced XLR, line output
- Alarm trigger: +5 V trigger for emergency audio override
- Other interfaces: Front USB port
- Line / alarm input voltage: 250±50 mV
- Line output voltage: 1000±100 mV
- Balanced output voltage: 2000±100 mV
- Frequency response: 50 Hz to 20 kHz (±3 dB)
- Signal-to-noise ratio: ≥80 dB
- Harmonic distortion: ≤0.5%
- Static power consumption: ≤30 W
- Power supply: AC 220 V/50 Hz
- Protection: All-metal enclosure with grounding, ESD 4 kV contact / 8 kV air
- Mounting: 19-inch rack, 2U
- Dimensions (L×W×H): 483×385×88 mm
- Net weight: 6.3 kg
Features
- Up to 4096 conference units per system: one host scales from a single boardroom to a full building of halls.
- 1 to 6 open microphones and 5 discussion modes: match speaking rules to each type of session.
- 6 HDMI camera inputs with automatic tracking plus RS-422: the picture switches to whoever opens a mic.
- 4 × 100 Mbps RJ45 ports with +48 V power: connect and power conference units without adapters.
- Dual-host hot backup: the meeting continues if the main host fails.
