DSPPA DM30 Desktop Microphone with 455 mm Tube
251.49ر.س
Product description
The DSPPA DM30 is a desk microphone with a cardioid pickup pattern, a 455 mm tube, a die-cast metal base and a built-in switch. It is made for meeting tables, lecture halls, broadcast desks and recording rooms.
====
The DSPPA DM30 is built for people who speak sitting down: a manager running a meeting, a trainer at a lecture desk, or an announcer in a facility's PA room. It stands on a die-cast metal base and raises the capsule on a 455 mm tube, so it meets the speaker at mouth level without leaning in. DSPPA designed it for meetings, lectures, broadcasting and recording.
DSPPA DM30 desktop microphone specs
From the official specification table on DSPPA's site:
- Polar pattern: cardioid.
- Frequency response: 50 Hz-16 kHz.
- Sensitivity: -73 dB ±3 dB; output impedance 600 Ω.
- Base size: 115 × 138 × 40 mm.
- Net weight: 1.1 kg.
Starting at 50 Hz, it carries the depth of a speaker's voice, and the 16 kHz upper limit is enough for crisp sibilants in Arabic speech.
Less buzz on a table full of phones
On a boardroom table, phones sit right next to the microphones, and every incoming message can cause a burst of buzz in the speakers. DSPPA built the DM30 to resist mobile phone and electromagnetic interference, cutting down that noise and the whistling that comes with it. The cardioid pattern focuses on whoever sits in front of the mic and pushes back air conditioning hum and chair noise from behind.
Silent switching and a steady base
The switch is built in, and DSPPA uses a circuit that suppresses the click when you turn the mic on or off, so the room does not hear a pop every time someone starts talking. The one-piece die-cast base is heavy enough that a stray hand or a stack of papers will not knock it out of position.
Where the DM30 fits
- Corporate and government meeting rooms: one mic for the chair or for each speaker.
- University lecture halls and training rooms: the lecturer's voice reaches the back row through the PA.
- School administration offices: daily announcements over the school PA.
- Reception and paging desks in hospitals and malls.
- Mosques: a mic on the lesson table or in the muezzin's room for announcements.
Connecting it to an amplifier
Plug the DM30 into the mic input of a mixer or mixer amplifier. The 600 Ω output impedance suits the mic inputs on most amplifiers. With several speakers in one room, choose a mixer with enough mic inputs, or look at DSPPA conference microphone systems that run many mics from one controller.
DM30 or the D6561 handheld?
Both are DSPPA microphones; the difference is how they are used. The DM30 is a fixed desk mic with a 115 × 138 mm base, a 455 mm tube and a built-in switch, so the speaker never has to hold it. The D6561 is a wired handheld that the speaker holds or clips onto a floor stand like the D7A, which suits people who talk standing up. If the presenter walks around the room, the MAG6551 wireless system beats both.
Frequently Asked Questions
How long is the microphone tube?
The tube is 455 mm long, the die-cast base measures 115 × 138 × 40 mm, and net weight is 1.1 kg.
Will phones on the table cause buzz?
DSPPA designed the DM30 to resist mobile phone and electromagnetic interference, so buzz from calls and messages is reduced.
Specifications
- Model: DM30
- Frequency response: 50 Hz-16 kHz
- Sensitivity: -73 dB ±3 dB
- Output impedance: 600 Ω ±30% at 1 kHz
- Polar pattern: Cardioid
- Mic tube length: 455 mm
- Base size (W × D × H): 115 × 138 × 40 mm
- Base material: Integral die-cast metal
- Switch: Built-in switch with switch-noise suppression
- Anti-interference: Anti-mobile phone, anti-electromagnetic
- Net weight: 1.1 kg
Features
- Cardioid pickup pattern: picks up the person in front and rejects sound from the sides and rear.
- 50 Hz-16 kHz response and -73 dB ±3 dB sensitivity: clear speech for meetings and lectures.
- Anti-phone and anti-electromagnetic interference: less buzz when phones sit on the table.
- Built-in switch with click suppression: turn the mic on and off without a pop in the speakers.
- 115 × 138 mm die-cast base with a 455 mm tube: stable on the desk and level with a seated speaker.
