Fanvil PN1 2-Wire Converter for Ethernet Over Phone Wiring up to 300 m
556.60ر.س
Product description
The Fanvil PN1 turns a 2-wire line into a 10/100 Mbps RJ45 Ethernet port, with runs of up to 300 m. It suits buildings with legacy phone cabling where pulling new network cable is not practical.
====
The Fanvil PN1 is a 2-Wire converter that gives any RJ45 device a network link over just two wires. That means the old telephone cabling already in a building can carry IP traffic, with no new cable pulled through ceilings and walls. You get one 10/100 Mbps Ethernet port and runs of up to 300 m on Cat 5e, RVV 2×0.5 or HYV 2×0.5.
How the Fanvil PN1 connects
Feed the PN1 a 2-wire line from a Fanvil PN8 or PN24 switch, or from a second PN1, then patch your device into its RJ45 port. In a PN1-to-PN1 pair, the first unit runs on a 54V 1.5A adapter and, per Fanvil's guide, the far unit needs no extra power source.
- One 10/100 Mbps RJ45 port.
- One 2-wire port; observe polarity when joining two PN1 units.
- Red power LED and a network LED that flashes with traffic.
- Restart button, held for 10 seconds.
Typical jobs in Saudi Arabia
Older hotels in Makkah or Madinah with a phone pair to every room, schools, and warehouses where opening walls is not an option. Fanvil advises cutting power before wiring the 2-wire side.
PN1 or a PN8 / PN24 switch?
The PN1 serves a single point. The PN8 has 8 two-wire ports and the PN24 has 24, and both power an X303-2WIRE phone directly without a PN1. Add a PN1 when the device at the far end has a standard RJ45 port.
Frequently Asked Questions
Can the PN1 work without a PN8 or PN24 switch?
Yes. Two PN1 units can be linked over two wires: one runs on a 54V 1.5A adapter, the other hands the link to an RJ45 device.
What is the maximum distance?
300 m for data plus power on Cat 5e, RVV 2×0.5 or HYV 2×0.5.
Do I need a PN1 for the X303-2WIRE phone?
No. The X303-2WIRE plugs straight into a PN8 or PN24 and takes network and power from it. The PN1 is for devices with a normal RJ45 port.
Specifications
- Model: PN1
- Type: 2-Wire converter (Ethernet to 2-wire)
- Network interface: 1 × RJ45
- Network speed: 10/100 Mbps
- 2-Wire interface: 1 group
- Network and power distance: 300 m on Cat 5e, RVV 2×0.5 or HYV 2×0.5 (PN8/PN24 to PN1, PN1 to PN1)
- Power input: External 54V 1.5A supply
- Indicators: Solid red power LED; network LED flashes during data exchange
- Restart button: Hold for 10 seconds
- Operating temperature: -20 to 50°C
- Enclosure: ABS
- Dimensions (L × W × H): 85 × 68 × 22.7 mm
- Mounting: Desktop or wall mount
- Compatibility: Fanvil PN8 and PN24 switches, another PN1, any standard RJ45 device
Features
- One 10/100 Mbps RJ45 port: links any standard network device to a 2-wire line.
- Up to 300 m on Cat 5e, RVV 2×0.5 or HYV 2×0.5: reuse existing phone wiring instead of a new run.
- Works with the 8-port PN8, the 24-port PN24, or as a PN1-to-PN1 pair: pick the layout that fits the job.
- 54V 1.5A input with power and network LEDs: link status is visible at a glance.
- 85×68×22.7 mm, desk or wall mount: rated for -20 to 50°C.
