DSPPA DSP5053W 30W White Two-Way Pendant Speaker

298.13

Product description


The DSPPA DSP5053W is a white 30W two-way pendant speaker with a 5.25-inch woofer and a silk dome tweeter. It is built for halls and lobbies with high ceilings and runs on 70V/100V lines or at 8 ohms.

====

The DSPPA DSP5053W is a white two-way pendant speaker rated at 30W, aimed at rooms where the ceiling sits well above normal height. In a banquet hall or hotel lobby with a 6-meter ceiling, a recessed speaker loses much of its speech clarity before the sound reaches the seats. Hanging the speaker lower fixes that, and the white finish lets it blend with the ceiling instead of drawing the eye. It runs from a 70V or 100V PA amplifier or from a standard 8-ohm amp.

DSPPA DSP5053W specifications

From DSPPA's official product page and the series datasheet:

  • 5.25-inch woofer with a 1-inch silk dome tweeter.
  • 30W RMS.
  • 110Hz to 20kHz frequency response.
  • 86±2dB sensitivity (1W/1m) and 101±2dB maximum SPL.
  • 185mm diameter, 255mm long, 2.6kg.

Why the two-way design matters

Single-driver budget speakers sound dull at the top end, and in a large room consonants blur together. In the DSP5053W, the woofer covers the low and mid range while the silk dome tweeter takes the highs up to 20kHz. Announcements and lectures come through more clearly, and background music keeps more detail.

8 ohms or a 100V line?

An 8-ohm connection suits a small room with two to four speakers on a standard amplifier, and each speaker gets the full 30W. For a building with several halls, corridors and long cable runs, use a 100V line with taps at 2.5, 5, 8, 15 or 30W, or a 70V line with taps from 1.25W to 15W. High-voltage lines cut losses over long cables and let you hang many speakers on one amplifier output.

Installation and build

DSPPA supplies a mounting bracket with the speaker. The housing is high-strength ABS with a metal round-hole grille, and the woofer's rubber surround resists moisture. Plan the drop height before installation. Anchor the suspension point to the concrete slab, not to gypsum tiles.

Getting clear speech under high ceilings

Echo is the main problem in tall rooms with hard walls. A speaker hung closer to the audience needs less volume, and lower volume means less sound bouncing off the walls. Use more speakers on low taps instead of a few on high taps, and space them evenly over the seating rows. Where the room hosts lectures, set the speakers nearest the lectern to a lower tap so their sound does not loop back into the microphone and cause feedback.

Typical uses in Saudi Arabia

  • High-ceiling meeting and conference rooms in companies and universities.
  • Hotel lobbies in Makkah and Madinah.
  • Exhibition and event halls.
  • Waiting areas in hospitals and government service centers.
  • Mosques with tall prayer halls, to carry the khutbah evenly across the room.

DSP5053W or DSP5053B?

Both are the DSP5053 with the same numbers: 30W, the same 70V and 100V taps, 8 ohms, a 5.25-inch woofer and 2.6kg. Color is the only difference: W is white and B is black. White fits light ceilings and formal halls; black suits exposed ceilings and industrial interiors.

Frequently Asked Questions

How many DSP5053W speakers can one amplifier drive?

On a 100V line, add up the taps: ten speakers at the 8W tap need 80W, so a 120W amplifier covers them. At 8 ohms the count is small and depends on the amplifier's minimum load.

Is it for speech or music?

Both. It pairs a 5.25-inch woofer with a 1-inch silk dome tweeter and covers 110Hz to 20kHz.

Does the DSP5053W sound different from the DSP5053B?

No. The specs are identical; only the color changes: W is white, B is black.

Specifications

  • Model: DSP5053W (DSP5053 in white)
  • Type: 2-way pendant speaker
  • Drivers: 5.25" woofer x1 + 1" silk dome tweeter x1
  • Rated power (RMS): 30 W
  • 70V line taps: 1.25W / 2.5W / 4W / 8W / 15W
  • 100V line taps: 2.5W / 5W / 8W / 15W / 30W
  • Low-impedance input: 8 Ω at 30W
  • Sensitivity (1W/1m): 86±2 dB
  • Max. SPL (1m): 101±2 dB
  • Frequency response: 110Hz - 20kHz
  • Dimensions: ø185 × 255 mm
  • Weight: 2.6 kg
  • Materials: High-strength ABS housing, PP woofer cone, moisture-proof rubber surround, round-hole mesh grille
  • Mounting: Pendant
  • Color: White
  • Accessories: Mounting bracket included per DSPPA

Features

  • Two-way design, 5.25-inch woofer plus 1-inch silk dome tweeter: speech stays intelligible in large rooms.
  • 110Hz to 20kHz response: handles announcements and background music on the same system.
  • 70V taps from 1.25W to 15W and 100V taps from 2.5W to 30W: balance level across many speakers.
  • 8-ohm input at 30W: runs from a standard amplifier in a small room, no line transformer needed.
  • White ABS housing, 2.6kg: matches white ceilings and conference room decor.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌