DSPPA DMA6112 6-Zone Matrix Amplifier, 6x120W on 100V Lines
3867.55ر.س
Product description
The DSPPA DMA6112 packs an 8x6 audio matrix and six 120W amplifier channels for 100V speaker lines into one 2U chassis. It fits schools, clinics, offices and mid-size shops that want a different source and volume level in each area.
====
The DSPPA DMA6112 replaces a stack of separate amplifiers with one 2U unit. It combines an 8x6 audio matrix with six 120W amplifier channels for 100V constant-voltage speaker lines, so reception can play soft background music while a page goes only to the warehouse. It suits schools, clinics, offices and shops that need separate control per area without a dedicated control room.
DSPPA DMA6112 key specs
These figures come from the official DMA6112/DMA6124 datasheet:
- Output: 6 x 120W, constant-voltage outputs up to 100V.
- 8x6 signal matrix: eight sources routed to six zones.
- 2 balanced XLR MIC/LINE inputs with 48V phantom power, plus 2 RCA AUX inputs.
- Signal-to-noise: at least 71 dB on mic and 76 dB on line, A-weighted.
- 4.3-inch resistive touch screen; chassis 483 x 353 x 88 mm.
Eight sources, six zones, one screen
Each zone's source and level are set on the touch screen. Sources include the two MIC/LINE inputs, two AUX inputs, an MP3 player reading from the front USB port or a TF card, FM radio, and Bluetooth through the wall panels. The four analog inputs each have rear bass and treble controls with a ±10 dB range.
Six RCA line outputs, one per zone, let you feed an extra amplifier or a recorder.
Paging and room-by-room control
The DMA60M paging microphone connects over RJ-45 and can page a single zone or every zone at once. Cable runs of 300 to 600 m per channel are supported.
Six more ports take DMA60W Bluetooth wall panels. Each panel is locked to its own zone, so a room can change its source and volume without touching anyone else's.
Priority and emergency inputs
The built-in priority order is MUTE, EMC IN, SIREN, CHIME, paging mic, Bluetooth panel, then the regular sources. Dry-contact inputs on the rear let an external system trigger the siren or mute the music, and the chime and siren sounds can be replaced from a USB stick.
Installation and power
The unit runs on 220-240V AC, operates from -10 to 50°C and mounts in an equipment cabinet as a 2U chassis. An 8-ohm monitor output on the rear drives a small speaker in the control room and follows the level of the zone you select.
Where the DMA6112 fits in Saudi buildings
- Schools: morning assembly broadcast to every classroom, with a separate zone for the courtyard and corridors.
- Clinics and medical centers: quiet music in waiting areas and patient calls in corridors.
- Restaurants and shops with several areas: main hall, family section and kitchen, each at its own level.
- Offices: staff paging in the warehouse without disturbing meeting rooms.
DMA6112 or DMA6124?
Both share the same matrix, inputs, screen and chassis size. The difference is power: 120W per zone on the DMA6112 against 240W on the DMA6124. Pick the DMA6112 when each zone's speaker load stays under 120W, for example fifteen 6W ceiling speakers on one line. Pick the DMA6124 for courtyards, long corridors and larger halls.
Frequently Asked Questions
Does the DSPPA DMA6112 need a separate amplifier?
No. It has six built-in 120W channels with 100V outputs, so 100V speakers connect directly to each zone.
How many microphones can I connect?
Two XLR MIC/LINE inputs with 48V phantom power, plus the DMA60M remote paging mic over RJ-45.
Can each room control its own volume?
Yes, with the DMA60W Bluetooth wall panel. The unit takes six panels, and each one controls only its own zone's source and volume.
Specifications
- Model: DMA6112
- Type: 6-zone matrix amplifier (DMA6112/DMA6124 system)
- Output power: 6 x 120W
- Speaker outputs: 6 constant-voltage outputs, 0-100V (2-pin 5.08 mm terminal blocks)
- Matrix: 8x6 signal matrix
- Inputs: 2 balanced XLR (MIC1/LINE1, MIC2/LINE2) + 2 RCA (AUX1, AUX2)
- Built-in sources: MP3 from USB or TF card, FM radio, Bluetooth via DMA60W panel
- AUX input sensitivity: 775 ±100 mV
- MIC input sensitivity: 5 ±1 mV
- LINE input sensitivity: 350 ±50 mV
- LINE OUT: 6 RCA (one per zone), 1000 ±100 mV
- Phantom power: 48 ±5 V on MIC1 and MIC2
- Distortion at rated power: Below 1% at 95V, below 5% at 100V
- S/N ratio (A-weighted): Mic 71 dB or more, line 76 dB or more
- Frequency response (line): 80 Hz to 15 kHz (±3 dB)
- Overload source EMF: 14 dB or more (constant voltage)
- Tone control: Bass ±10 dB at 100 Hz, treble ±10 dB at 10 kHz (±2 dB error) on AUX1, AUX2, MIC1, MIC2
- Priority: MUTE > EMC IN > SIREN > CHIME > paging mic > Bluetooth panel > other sources
- Remote paging mic: RJ-45 port for DMA60M, DC 48V powered, 300-600 m per channel
- Wall control panels: 6 ports for DMA60W panels with fixed zone addresses, DC 48V, 300-600 m
- Control inputs: EMC IN, MUTE, SIREN dry contacts (3.81 mm Phoenix) + FM antenna + Bluetooth antenna
- Monitor output: 8 ohm / 0.6 W, follows zone volume
- Front panel: USB port, TF card slot, IR receiver window, power indicator and switch, stylus
- Display: 4.3-inch resistive touch screen
- Power supply: AC 220-240V
- Operating temperature: -10 to 50°C
- Dimensions: 483 x 353 x 88 mm (2U)
Features
- Six 120W zones on 100V lines: drive speakers in six separate areas without a separate amplifier per area.
- 8x6 matrix: send any of 8 sources (mics, AUX, MP3, FM, Bluetooth) to any zone.
- Two XLR inputs with 48V phantom power: plug in condenser mics or line-level gear directly.
- 4.3-inch touch screen, USB port and TF card slot: pick sources and play MP3 files from the unit itself.
- RJ-45 paging mic port plus six DMA60W panel ports: page one zone or all zones, and let each room set its own volume.
