Huawei S220S-24P4JX 24-Port PoE+ Switch with 400W and 10G Uplinks
1835.40ر.س
Product description
The Huawei S220S-24P4JX is part of the eKitEngine S220S series, offering 24 Gigabit PoE+ ports with a 400W budget plus two 10GE SFP+ and two 2.5GE SFP uplinks. It suits small offices, budget hotels and schools that want a PoE switch they can manage from a browser or a phone app.
====
Need 24 PoE+ ports with real power behind them? The Huawei S220S-24P4JX delivers a 400W PoE budget across 24 Gigabit ports and adds a mixed set of uplinks: two 10GE SFP+ and two 2.5GE SFP. It belongs to Huawei's eKitEngine S220S series for small and mid-sized businesses, and the datasheet names small offices, budget hotels, factories, schools and building security as target sites.
Huawei S220S-24P4JX specifications
From Huawei's official S220S series datasheet:
- 24x 10/100/1000BASE-T ports with PoE+.
- 2x 10GE SFP+ and 2x 2.5GE SFP uplinks.
- 400W total PoE budget.
- 98 Gbps switching capacity, 73 Mpps forwarding rate.
- Up to 16K MAC addresses, 4094 VLANs.
- AC input 100-240 V, or 240 V high-voltage DC.
- 1U chassis, 43.6 x 442 x 220 mm.
What the JX suffix means
The S220S series has two 24-port models with the same 400W budget. The S220S-24P4J comes with four 2.5GE SFP uplinks. The S220S-24P4JX swaps two of those for 10GE SFP+ ports, which lifts switching capacity from 68 Gbps to 98 Gbps. If your core switch or NVR accepts 10G, the JX model gives you an uplink four times faster than a 2.5G port. The two 2.5G slots remain handy for a fiber link to a switch on another floor.
400W budget and Fast PoE
Spread over 24 ports, 400W averages about 16.7W per port with everything running at once. Still, add up the actual draw of your devices from their datasheets before you install. Huawei lists Fast PoE for this model, so cameras and access points start receiving power within seconds of the switch turning on. That matters on CCTV sites after a power cut.
App-based management and ring protection
Configure the switch through its web interface or the HUAWEI eKit phone app, in either cloud or on-premise mode. For ring networks it runs STP, RSTP, MSTP and ERPS (G.8032), which Huawei says switches over at millisecond level, along with LACP link aggregation and storm control. Security covers Secure Boot, DoS, ARP and ICMP attack defense, DHCP snooping, port isolation and AAA.
Where it fits in Saudi Arabia
- Budget hotels in Makkah or Madinah: corridor APs and room phones, one switch per floor.
- Offices and branches: up to 24 IP phones, cameras and APs.
- Warehouses and factories in Dammam: CCTV with a 10G uplink to the recording room.
- Schools: corridor cameras and Wi-Fi for one building.
S220S-24P4JX or S220-48P4X?
The S220-48P4X, from the S220 series, doubles the port count: 48 PoE+ ports and four 10G SFP+ uplinks, a 380W budget, 176 Gbps and 131 Mpps, and a 50°C operating limit. The S220S-24P4JX gives 400W to half as many ports, mixes 2.5G and 10G uplinks, accepts high-voltage DC and runs up to 40°C. If you want 24 ports with four 10G uplinks, look at the S220-24P4X. Choose the S220S-24P4JX for up to 24 devices managed simply from an app.
Frequently Asked Questions
What is the difference between the S220S-24P4JX and S220S-24P4J?
Both have 24 PoE+ ports and 400W. The JX adds two 10GE SFP+ plus two 2.5GE SFP uplinks, while the J has four 2.5GE SFP, so JX switching is 98 vs 68 Gbps.
Can I manage the Huawei S220S-24P4JX from my phone?
Yes. It works with the HUAWEI eKit app in cloud or on-premise mode, and also has a web interface.
How many cameras can the S220S-24P4JX power?
Up to 24 PoE+ devices on its copper ports, as long as their combined draw stays within 400W. Check each camera's datasheet for its wattage.
Specifications
- Model: S220S-24P4JX
- Series: Huawei eKitEngine S220S (Layer 2 switches for SMB)
- Downlink ports: 24x 10/100/1000BASE-T, PoE+
- Uplink ports: 2x 10GE SFP+, 2x 2.5GE SFP
- PoE budget: 400 W
- PoE features: Fast PoE
- Switching capacity: 98 Gbps
- Packet forwarding rate: 73 Mpps
- MAC address table: 16K
- VLANs: 4094
- Ring and link protection: STP, RSTP, MSTP, ERPS (G.8032), LACP, storm control
- Multicast: IGMP v1/v2/v3 and IGMP snooping
- QoS and ACL: Per-port rate limiting, traffic policing, 8 queues per port, IPv4 ACL, packet filtering
- Security: Secure Boot, DoS/ARP/ICMP defense, DHCP snooping, port isolation, blackhole MAC, AAA, CPU protection
- Management: Cloud or on-premise, web, HUAWEI eKit app, SNC, SSHv2, HTTPS, LLDP
- Maintenance tools: Logs and multi-level alarms, port mirroring, EEE, one-click online upgrade
- Input voltage: Rated 100-240 V AC, 50/60 Hz (range 90-290 V AC, 45-65 Hz); HVDC 240 V (range 190-290 V DC)
- Cooling: Air cooling with intelligent fan speed control
- Dimensions (H x W x D): 43.6 x 442 x 220 mm (1U)
- Operating temperature: -5°C to +40°C (0 to 1800 m altitude)
- Storage temperature: -40°C to +70°C
- Humidity: 5% to 95% RH, non-condensing
Features
- 24 Gigabit PoE+ ports with 400W: about 16.7W per port on average, even with every port in use.
- 2x 10GE SFP+ and 2x 2.5GE SFP uplinks: a fast link to the NVR room plus flexible links to other floors.
- Fast PoE per Huawei's datasheet: cameras and APs come up within seconds of the switch powering on.
- 98 Gbps switching and 73 Mpps forwarding: full speed across all ports under camera and Wi-Fi load.
- HUAWEI eKit app and web management: set up and monitor the network from your phone, no CLI needed.
