DSPPA DSP207EN 12W EN54-24 Wall Projector Speaker
189.08ر.س
Product description
The DSPPA DSP207EN is a 12W wall projector speaker that DSPPA certifies to EN54-24:2008 for fire voice alarm systems. A 130mm dual-cone driver and 12/6/3W taps make it a fit for hotel corridors, hospitals and offices.
====
The DSPPA DSP207EN is a 12W wall-mounted projector speaker that DSPPA certifies to EN54-24:2008, the European standard for loudspeakers in fire voice alarm systems. It uses a single 130mm dual-cone driver with 12, 6 and 3W taps on a 100V line. Hotel corridors, hospital wards and office floors running a PAVA voice evacuation system are where it belongs.
DSPPA DSP207EN specifications
Taken from the official DSPPA datasheet:
- Power: 12W nominal, 24W music, with 12/6/3W taps.
- Frequency response: 110Hz to 18kHz.
- Sensitivity 86.3dB; maximum SPL 97.2dB.
- Environmental class: EN54-24 Type A (indoor), IP54.
- Size: 140mm diameter by 240mm deep; weight 1.2kg.
What makes it an alarm speaker
A voice alarm speaker has to keep delivering instructions while a fire develops. DSPPA builds the DSP207EN with a flame-retardant ABS V0 body and an aluminium grille. A built-in thermal fuse protects the speaker line from overheating, and the ceramic IN-OUT terminals tolerate heat better than plastic blocks. DSPPA publishes a Declaration of Performance for its EN54 speakers, which you can add to the project file if the consultant asks for it. That is what separates it from wall speakers designed only for music.
Coverage down a corridor
Projector speakers throw sound forward, so they usually go at the end of a corridor or along one wall. Coverage is 253.5° at 1kHz and narrows to 59.4° at 8kHz. Use the 3W tap in a small room and 12W in a long corridor or a noisier area. With 86.3dB sensitivity, several speakers on a lower tap spaced along a corridor work better than one loud unit, because every room then hears the message at a similar level.
Where it fits in Saudi Arabia
- Hotel corridors in Makkah, Madinah and Riyadh as part of a floor-by-floor evacuation system.
- Hospitals and clinics: corridors and waiting areas.
- Office towers: corridors and meeting rooms.
- Schools and universities: indoor corridors between classrooms.
Note that DSPPA classifies it as Type A for indoor use, so keep it out of areas exposed to rain.
Voice evacuation compatibility
The DSP207EN works with any 100V amplifier, including DSPPA's PAVA9500 zone amplifier. The dual IN-OUT terminals make it easy to daisy-chain several speakers on one line, and a speaker line monitor can be added so the system reports an open or shorted line. For load planning, add up the taps on each zone: ten speakers on the 6W tap draw 60W of amplifier power.
DSP207EN or DSP217EN?
Both share the same 140 × 240mm housing, 86.3dB sensitivity, IP54 rating and Type A class. The DSP207EN uses a single dual-cone driver: 12W, 12/6/3W taps, response to 18kHz, 97.2dB max SPL, 1.2kg. The DSP217EN is a 2-way coaxial with a neodymium tweeter: 24W, 24/12/6W taps, response to 20kHz, 100.3dB max SPL, 1.46kg. Choose the DSP207EN for speech in corridors and rooms, and the DSP217EN when you also want better background music or need to cover a larger space.
Frequently Asked Questions
Is the DSP207EN EN54 certified?
Yes. DSPPA lists it as EN54-24:2008, Type A, and publishes a Declaration of Performance on its site.
Can it be installed outdoors?
No. Despite the IP54 rating, DSPPA classifies it for indoor use. Choose an outdoor speaker for exposed areas.
How many can a 240W amplifier drive?
Up to 20 on the 12W tap in theory; plan for a few less to keep some amplifier headroom.
Specifications
- Model: DSP207EN
- Standard: EN54-24:2008 (loudspeakers for fire voice alarm systems)
- Environmental class: EN54-24 Type A, indoor applications
- IP rating (EN60529): IP54
- Driver: 1-way dual cone, full range, Ø130 mm (5")
- Transformer: 100 V (12 W – 6 W – 3 W)
- Frequency response (-10 dB): 110 to 18,000 Hz
- Sensitivity (1 m, 1 W): 86.3 dB
- Max SPL (1 m, Pmax): 97.2 dB
- Coverage angle (-6 dB): 360° (500 Hz), 253.5° (1 kHz), 125.5° (2 kHz), 86.8° (4 kHz), 59.4° (8 kHz)
- Directivity index DI: 1.3 / 3.9 / 5.4 / 6.7 / 8.2 dB (500 Hz to 8 kHz)
- Directivity factor Q: 1.4 / 2.4 / 3.5 / 4.6 / 6.6 (500 Hz to 8 kHz)
- Nominal / music power: 12 W / 24 W
- Nominal impedance @ 1 kHz: 833 Ω (12 W), 1.66 kΩ (6 W), 3.33 kΩ (3 W)
- Dimensions (Ø × D): 140 × 240 mm
- Aluminium bracket: 140 – 152 mm
- Weight: 1.2 kg
- Material: ABS V0, painted aluminium grille
- Colour: White
- Connections: Ceramic IN-OUT terminals with thermal fuse
- Mounting: On-wall or shelf mount
- Accessories: Aluminium bracket, waterproof cover, cable glands
Features
- EN54-24:2008, Type A: built for indoor voice evacuation systems.
- 12, 6 and 3W taps on a 100V line: match output to room size and background noise.
- Thermal fuse and dual IN-OUT ceramic terminals: line protection against overheating and easy daisy-chaining.
- Flame-retardant ABS V0 body with aluminium grille: materials chosen for alarm duty.
- 253.5° coverage at 1kHz, 110Hz to 18kHz response: clear messages down a corridor.
