DSPPA POE6311 IP Network Ceiling Speaker, 2x9W, PoE Powered

930.47

Product description


The DSPPA POE6311 is a network ceiling speaker with a 2x9W built-in digital amplifier, 16-bit/48 kHz audio decoding and a choice of PoE or 15V DC power. It suits hotels, offices and clinics that want background music and paging in every room over the existing network.

====

Got a false ceiling and network drops above it? The DSPPA POE6311 turns each drop into its own audio point. This network ceiling speaker carries a 2x9W digital amplifier, decodes 16-bit audio at up to 48 kHz and runs on PoE or a 15V adapter. Background music, paging and alarm messages arrive as digital streams from the DSPPA system host, so the signal stays clean all the way to the room.

DSPPA POE6311 specifications

  • 2x9W built-in digital amplifier, 9W or more effective output.
  • 102 dB maximum SPL.
  • 40 Hz to 18 kHz frequency response (±3 dB).
  • SNR of 70 dB or better, THD of 1% or less.
  • 185 mm diameter, 114 mm depth, 1.5 kg net.

Two ways to power it

The side panel has a PoE port compliant with IEEE 802.3at and a 15V DC input. DSPPA recommends a 48V PoE switch in AT mode when one cable carries both data and power. If your existing switch has no PoE, use it for data only and feed the speaker from the adapter. That flexibility helps in older buildings where the network has not been upgraded to PoE yet.

Room-by-room volume and tone

Volume and playback status can be controlled per speaker, with bass adjustment at 60 Hz and treble at 10 kHz. Turn it down in a small meeting room and up in a long corridor on the same system. The amplifier has two 9W channels.

Quick install, room to expand

Strong spring clips hold the speaker in the ceiling cut-out, with no extra brackets or chains. A Micro SD slot on the side is reserved by DSPPA for later expansion, meaning it does not play local files today.

Where it works in Saudi Arabia

  • Hotel corridors in Makkah and Madinah: soft music and guest messages.
  • Offices and branches: page a person or department without an amplifier rack.
  • Clinics and waiting areas: patient calls with calm background audio.
  • Malls and shops: promotions announced in specific sections.

Compatibility

The POE6311 plays background music, emergency paging and alarm signals sent from the DSPPA system host.

POE6311 or POE6463W?

The POE6311 is a round 185 mm ceiling speaker with a 2x9W amplifier and a choice of PoE or 15V power. The POE6463W is a wall-mount box with a 6.5-inch woofer and 1-inch tweeter, a digital display, IR remote, AUX and mic inputs and MP3 playback from USB or SD, powered by PoE only. Go with the POE6311 for false ceilings and the POE6463W when a room needs its own controls and sources.

Frequently Asked Questions

Does the POE6311 work without a PoE switch?

Yes. It has a 15V DC input, so the network cable carries data only and an adapter powers the speaker. With PoE, DSPPA recommends a 48V AT-mode switch.

Can it play files from a Micro SD card?

Not currently. DSPPA reserves the Micro SD slot for later expansion; audio comes from the system host over the network.

Specifications

  • Model: POE6311
  • Type: Network ceiling speaker with TCP/IP digital signal processor
  • Built-in amplifier: Digital, 2×9 W
  • Effective output power: ≥9 W
  • Audio decoding: Up to 48 kHz, 16-bit
  • Max SPL: 102 dB
  • Frequency response: 40 Hz to 18 kHz (±3 dB)
  • THD: ≤1%
  • SNR (A): ≥70 dB
  • Input sensitivity: -10 ±1 dB
  • Tone adjustment: Bass 0 to 14 (±2) at 60 Hz, treble at 10 kHz
  • Power supply: PoE to IEEE 802.3at (48 V AT-mode switch recommended) or DC 15 V
  • Side panel: DC input, PoE/network port, Micro SD slot (for future expansion), speaker output
  • Mounting: Strong spring clips for false ceilings
  • Unit size: Φ185×114 mm
  • Net weight: 1.5 kg

Features

  • 2x9W built-in digital amplifier: each speaker runs on its own, no central amplifier or 100V wiring.
  • 40 Hz to 18 kHz response, 102 dB max SPL: clear music in corridors and rooms.
  • PoE (IEEE 802.3at) or 15V DC input: still works when the switch has no PoE.
  • Digital decoding up to 48 kHz / 16-bit: the signal stays digital all the way to the ceiling.
  • Local volume, bass and treble control: tune each speaker to its room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌