DSPPA PAVA9500 8-Zone Voice Alarm Host with Standby Amplifier
8027.52ر.س
Product description
The DSPPA PAVA9500 is the host of DSPPA's PAVA9500 voice alarm system, running evacuation messages, paging and background music across 8 zones with a standby amplifier. It fits small malls, office buildings and exhibition halls, and scales to 160 zones with expansion amplifiers.
====
The DSPPA PAVA9500 is the host unit of DSPPA's PAVA9500 voice alarm system. In one 2U chassis it runs evacuation messages, everyday paging and background music for 8 zones on 100V speaker lines, with a standby amplifier that takes over automatically if the main one fails. DSPPA positions it for small malls, office buildings and exhibition halls, and the system grows to 160 zones with expansion amplifiers.
DSPPA PAVA9500 key specifications
- 8 zones with A/B speaker outputs, each with its own on/off and volume control.
- Two built-in digital amplifiers (duty and standby) with automatic changeover.
- 6 external inputs (2 balanced mic, 4 line) plus 1 line output for recording or expansion.
- SD card slot up to 64GB for voice messages, recordings and event logs.
- 2 RJ45 CAN bus ports to cascade or loop expansion amplifiers, up to 600 m from the host.
One-button evacuation and a front-panel emergency mic
EVAC and ALERT buttons sit on the front panel, each linked to an editable alarm message, so an evacuation announcement starts with a single press. The built-in EMC microphone lets the duty officer give live instructions straight after. Up to 10 custom emergency program sources can be stored. Once emergency mode is active, the announcement is forced to every zone and overrides paging and music.
Line supervision and fault reporting
The PAVA9500 checks every speaker line for open circuits, short circuits and ground faults, with a fault LED per zone. It also watches the link to expansion amplifiers and paging microphones and flags any unit that drops off. Power comes from AC 220-240V mains with a DC 24V battery input as backup; changeover is automatic and losing either supply raises a warning.
Fire panel integration and remote paging
- 8 trigger inputs (dry contact or 3.3-24V level) to receive signals from the fire alarm panel.
- 8 dry-contact outputs and 8 24V outputs to override local volume controls.
- 4 RJ45 ports for remote microphones, up to 8 units such as the PAVA9009 fireman microphone or the PAVA9008 paging microphone.
- Ethernet port for PC monitoring and control with PAVA9000 software, plus firmware updates.
Paging can go to selected zones while background music keeps playing in the rest of the building.
Typical projects in Saudi Arabia
- Small malls and retail centers: music in the corridors and paging to one zone without cutting music elsewhere.
- Office towers and business centers: daily announcements plus evacuation started automatically by the fire panel.
- Hotels and exhibition halls in Riyadh and Jeddah: scheduled messages that run without staff.
- Schools: daily scheduled announcements and evacuation readiness from the same unit.
PAVA9500 or the PAVA9500E expansion amplifier?
Both are 2U units with 8 zones. The PAVA9500 is the host and carries the EMC microphone. The PAVA9500E only works under a PAVA9500 host and adds 8 zones per unit, up to 19 units. If you need fewer zones with more power in each, the PAVA9425E adds 4 zones on 1000W.
Frequently Asked Questions
How many zones does the DSPPA PAVA9500 support?
8 zones in the unit itself. The system reaches 160 zones with up to 19 PAVA9500E expansion amplifiers, or 128 zones with 30 PAVA9425E units.
Can it connect to a fire alarm panel?
Yes. It has 8 trigger inputs (dry contact or 3.3-24V level) that start the evacuation message automatically, plus a fire reset input.
What happens if an amplifier fails?
The unit has two amplifiers, duty and standby, and switches to the standby automatically. It also runs on DC 24V batteries if mains power is lost.
Specifications
- Model: PAVA9500
- Type: 8-zone voice alarm host with main/backup switching
- Chassis: 2U, black oxidized aluminum alloy, frosted panel
- Amplifiers: 2 digital amplifiers (main and backup), automatic changeover
- Zones: 8 zones, A/B outputs, independent on/off and 6-step volume per zone
- Input sensitivity: EMC MIC: 20mV, 600Ω; MIC: 5±0.5mV, 10kΩ; LINE: 1000±100mV, 10kΩ
- Harmonic distortion: EMC MIC: <1% @1kHz; MIC: 1% @1kHz; LINE: <1% @1kHz
- Frequency response: EMC MIC: 80Hz-15kHz (±3dB); LINE: 50Hz-18kHz (±3dB)
- S/N ratio: EMC MIC: >75dB (A); LINE: >80dB (A)
- Line auxiliary output: 1000mV, 80Hz-15kHz (±3dB), <1% @1kHz
- Audio I/O: 2 balanced mic inputs, 4 line inputs, 1 line output, front-panel EMC mic
- Control I/O: 8 dry-contact or level (3.3-24V) inputs, 8 dry-contact outputs, 8 x 24V override outputs
- System contacts: System fault relay output, emergency mode relay output, fire reset input (t≥0.5s), AC/BAT/FAULT contact outputs
- Bus and network ports: 2 x RJ45 CAN bus for expansion, 4 x RJ45 for paging mics (up to 8 units), Ethernet for PAVA9000 software
- Voice messages: WAV, stored on SD card, retention >10 years, up to 10 emergency sources
- SD card: Up to 64GB for audio, recordings and logs
- Built-in player: MP3 and WAV, automatic and scheduled playback
- Line supervision: Open, short and ground fault detection; expansion amp or mic dropout detection
- Bus distance: Up to 600 m host to one expansion unit
- Maximum expansion: 19 x PAVA9500E (160 zones) or 30 x PAVA9425E (128 zones)
- Power supply: AC 220-240V, 50-60Hz; DC 24V/17A, automatic changeover
- Line fuse: F6.3AL 250V
- Unit dimensions (LxWxH): 483 x 430 x 88 mm
- Net weight: 12.05 kg
Features
- Two amplifiers, duty and standby: if the main amp fails, the standby takes over so the evacuation message keeps playing.
- 8 independently controlled zones: per-zone on/off and volume, and paging to one zone while music continues in the others.
- EVAC and ALERT buttons plus an EMC microphone: start the evacuation message with one press, then guide people live.
- 8 trigger inputs and 8 dry-contact outputs: direct link to the fire alarm panel and control of other equipment.
- Expandable to 160 zones: up to 19 PAVA9500E or 30 PAVA9425E expansion amplifiers on one host.
