Huawei AP361 Wi-Fi 6 Ceiling Access Point, AX1800 Dual-Band

417.07

Product description


The Huawei AP361 is a HUAWEI eKit indoor access point for ceiling or wall mounting, delivering dual-band Wi-Fi 6 at 1.775 Gbps with 80 recommended users. Huawei pitches it as a cost-effective model for classrooms, hotels and multi-dwelling buildings.

====

The Huawei AP361 is an indoor Wi-Fi 6 access point that runs the 2.4 GHz and 5 GHz bands at the same time for a combined 1.775 Gbps, with Huawei recommending up to 80 users per unit. It belongs to HUAWEI eKit, the Huawei sub-brand built for the distribution channel and small to mid-sized businesses, not to the enterprise AirEngine series. Huawei positions it as a cost-effective choice for classrooms, hotels and multi-dwelling buildings, where you need many access points and a sensible cost per point.

Huawei AP361 key specifications

The figures below come from the official HUAWEI eKit product page:

  • Standard: Wi-Fi 6 (802.11ax), backward compatible with older Wi-Fi devices.
  • Device rate: 1.775 Gbps (AX1800 class).
  • Radios: two, each 2x2 MIMO.
  • Channel width: up to 40 MHz on 2.4 GHz and 80 MHz on 5 GHz.
  • Users: 80 recommended.
  • Optimal signal distance: 20 m.
  • Ethernet: gigabit RJ45 with PoE input.

Sized for a classroom or a hotel floor

A school classroom fills up fast: tablets, phones, the teacher's laptop and an interactive display all connect at once. Eighty recommended users leaves comfortable headroom for a class of 30 to 35 students. In hotels and residential buildings, plan one unit per corridor section or per group of rooms depending on wall thickness, and treat the 20 m figure as a design reference rather than a guarantee for every building.

Smart antennas and flexible mounting

The antennas sit inside the housing, with peak gain of 4 dBi per chain on 2.4 GHz and 5 dBi on 5 GHz, and transmit power up to 23 dBm combined on each band. The round body is 180 mm across, 35 mm deep and weighs 0.45 kg, so it blends into a suspended ceiling. Huawei lists solid walls, gypsum board, spring tee, flat-edge T-rail and channel rail ceiling grids, beams and threaded rods as supported mounting surfaces.

One cable for data and power

The AP361 draws power over 802.3af PoE with a maximum of 9.4 W. Any PoE switch can run it with no power adapter near the ceiling, and a switch with a moderate PoE budget can feed a large number of units. The wired connection runs at gigabit speed, which matches the real-world throughput of this class of AP in most projects.

Where it fits in Saudi Arabia

  • Private and public schools: one unit per classroom for e-learning platforms and online exams.
  • Hotels and furnished apartments in Makkah and Madinah: corridor and lobby coverage at a lower cost per point.
  • Residential buildings: one managed network for the owner instead of a separate router in every flat.
  • Small offices: an open-plan space of 20 to 40 staff usually needs one or two units, depending on size.

AP361 or AP362E?

Both share the same 180 mm round body and 802.3af power. The difference is speed and channel width: the AP361 tops out at 1.775 Gbps with 80 MHz channels, while the AP362E reaches 2.975 Gbps with 160 MHz channels and 1024-QAM. Pick the AP361 when device count matters most and budget is tight; pick the AP362E for offices that move large files or live on video calls.

Frequently Asked Questions

How many users does the Huawei AP361 support?

Huawei recommends 80 users per unit, which suits a classroom or a small open-plan office.

Does the AP361 need a power adapter?

It is powered by 802.3af PoE over the network cable, with a maximum draw of 9.4 W.

Can it go on a wall as well as a ceiling?

Yes. It mounts on suspended ceilings, gypsum board, solid walls and T-rail ceiling grids.

Specifications

  • Model: AP361 (part number 50086871)
  • Product line: HUAWEI eKit (eKitEngine)
  • Type: Indoor settled AP, ceiling or wall
  • Wi-Fi standard: 2.4 GHz: 802.11b/g/n/ax; 5 GHz: 802.11a/n/ac/ac Wave 2/ax
  • Operating bands: 2.4 GHz and 5 GHz
  • Device rate: 1.775 Gbps
  • Radios: 2
  • MIMO spatial streams: 2.4 GHz: 2x2; 5 GHz: 2x2
  • Max channel bandwidth: 2.4 GHz: 40 MHz; 5 GHz: 80 MHz
  • Access users: 80 recommended
  • Optimal signal distance: 20 m
  • Max transmit power: 2.4 GHz and 5 GHz: 20 dBm/chain, 23 dBm combined (versions before V200R024C10 limited to 20 dBm combined until patched)
  • Antennas: Built-in smart antennas
  • Antenna gain: 2.4 GHz: 4 dBi/chain peak, 2 dBi combined; 5 GHz: 5 dBi/chain peak, 3 dBi combined
  • Ports: GE (RJ45), 10/100/1000 Mbps auto-sensing
  • Power input: PoE, 802.3af
  • Max power consumption: 9.4 W
  • Installation: Wall or ceiling
  • Mounting surfaces: Solid wall, gypsum board, spring tee, flat-edge T-rail, channel rail, beam, threaded rod
  • Dimensions (unpacked): Diameter x depth: 180 x 35 mm
  • Weight: 0.45 kg unpacked
  • Operating temperature: 0°C to 40°C (max derated 1°C per 300 m from 1800 m to 5000 m)
  • Operating humidity: 5% to 95% RH, non-condensing

Features

  • 1.775 Gbps dual-band Wi-Fi 6: a 2x2 radio on 2.4 GHz and another on 5 GHz split old and new devices across the bands.
  • 80 recommended users and a 20 m optimal range: one unit covers a full classroom or a stretch of hotel corridor.
  • Built-in smart antennas with up to 5 dBi gain on 5 GHz: good signal with no external antennas hanging from the ceiling.
  • 802.3af PoE at 9.4 W max: one Ethernet cable carries data and power from any standard PoE switch.
  • 180 mm diameter, 35 mm deep: mounts on gypsum board, ceiling grid rails or a wall and stays visually quiet.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌