DSPPA DSP915 20W Coaxial Ceiling Speaker with 70V/100V Power Tap

66.65

Product description


The DSPPA DSP5211L is a 6.5-inch coaxial ceiling speaker rated 10W at 8 ohms, in a slim 80mm-deep, 0.8kg body. It suits majlis rooms, offices and small shops running two to four speakers from a standard music amplifier.

====

The DSPPA DSP5211L serves a different job from large PA systems: a villa majlis, a manager's office or a small shop where you want clear sound from the ceiling through an ordinary music amplifier. It is a 6.5-inch coaxial ceiling speaker rated 10W at 8 ohms, with no line transformer and a body just 80mm deep.

DSPPA DSP5211L specifications

From DSPPA's official product page and the DSP5211L/DSP5211CL datasheet:

  • 6.5-inch woofer and 0.75-inch coaxial tweeter.
  • 10W RMS at 8 ohms.
  • Sensitivity 93±2dB, maximum SPL 103±2dB.
  • Frequency response 90Hz to 18kHz.
  • Cutout 168 to 172mm.
  • Size Φ190 x 80mm, weight 0.8kg.

What 8 ohms means in practice

The speaker wires straight to the output of a low-impedance music amplifier, such as a two-channel in-wall amp or a compact player. That suits rooms with two to four speakers. Take care when adding more than one speaker per channel: two 8-ohm speakers in parallel present 4 ohms, so check that your amplifier is rated for that load. For projects with dozens of speakers and long cable runs, the 100V version is the better fit.

A slim body for shallow ceilings

At 80mm deep, it fits apartments and offices where ducting leaves little room above the gypsum. There is no back cover and the speaker weighs only 0.8kg, so it adds almost no load to the ceiling. If you want a back cover to keep dust off the driver, the DSP5211CL version includes one and measures 105mm deep.

Sound and durability

The coaxial tweeter at the center of the woofer spreads high frequencies evenly below the speaker, so speech and music sound clear from anywhere in the room. DSPPA states that it passed IEC 268-5 power handling testing over 100 hours of continuous operation and can briefly handle twice its rated power.

Example: a majlis with four speakers

A 6 x 8 meter majlis is usually well served by four DSP5211L speakers laid out in a square. Wire two speakers per channel on a two-channel amplifier and each channel sees 4 ohms, so choose an amplifier rated for that load. If the amp only supports 8 ohms, stay with one speaker per channel or pick a model with more channels. Use speaker cable sized for the run and keep it away from mains wiring above the ceiling.

Where to install it in Saudi Arabia

  • Villa majlis and living rooms with an in-wall music amplifier.
  • Executive offices and small meeting rooms.
  • Cafes, salons and small retail shops.
  • Clinics and compact waiting rooms.

DSP5211L or DSP5211C?

The acoustics match: a 6.5-inch woofer, a 0.75-inch tweeter, 10W, 93dB sensitivity and a 90Hz to 18kHz response. The connection and body differ. The DSP5211L runs at 8 ohms, measures 80mm deep and weighs 0.8kg. The DSP5211C runs on a 100V line with 3W, 6W and 10W taps, measures 105mm deep and weighs 1.1kg. Pick the DSP5211L for a room or shop with a few speakers, and the DSP5211C for a PA system across a school or a whole building.

Frequently Asked Questions

Can the DSP5211L run on a 100V PA amplifier?

Not directly. It is an 8-ohm speaker without a line transformer. For 100V systems, choose the DSP5211C.

How many speakers per amplifier channel?

One 8-ohm speaker per channel is safest. Two in parallel make 4 ohms, so confirm your amplifier supports a 4-ohm load.

What ceiling cutout does it need?

A round cutout of 168 to 172mm, with 80mm of depth for the speaker body.

Specifications

  • Model: DSP5211L
  • Series: DSP5211L / DSP5211CL coaxial frameless ceiling speaker
  • Drivers: 6.5" woofer x1 + 0.75" coaxial tweeter x1
  • Rated power (RMS): 10 W
  • Impedance: 8 Ω
  • Sensitivity (1W/1m): 93±2 dB
  • Max. SPL (1m): 103±2 dB
  • Frequency response: 90Hz - 18kHz
  • Cutout diameter: Φ168 - 172 mm
  • Dimensions: Φ190 × 80 mm
  • Weight: 0.8 kg
  • Back cover: None (DSP5211CL version has a back cover)
  • Grille: Carbon-alloy aluminum mesh, RAL white coating, thin-edge frameless design
  • Magnet and cone: Magnet system encapsulated in engineering plastic; treated paper cone
  • Power handling test: IEC 268-5 (PHC), 100 hours continuous, SAFE tested; handles 2x rated power for short periods
  • Mounting: Spring clips in a ceiling cutout
  • Applications per datasheet: Schools, offices, cafes, hospitals, hotels, shopping malls

Features

  • 8-ohm input with no transformer: connects straight to a music amplifier or in-wall player.
  • Only 80mm deep and 0.8kg: fits suspended ceilings with a shallow void.
  • 168 to 172mm cutout with spring clips: quick installation in gypsum board.
  • 6.5-inch woofer with a 0.75-inch coaxial tweeter: 90Hz to 18kHz for music and speech.
  • 93±2dB sensitivity: good volume from a small, low-power amplifier.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌