Huawei AP772 Outdoor Wi-Fi 7 Access Point, 6.45 Gbps, IP68

1705.07

Product description


The Huawei AP772 is a high-capacity outdoor Wi-Fi 7 access point rated at 6.45 Gbps, with a 4x4 5 GHz radio and support for up to 1024 users. A 2.5GE port, a 10GE SFP+ fiber port and an IP68 housing make it a fit for busy plazas, large compounds and event grounds.

====

The Huawei AP772 is made for outdoor spaces where hundreds of people gather: compound plazas, event grounds and university campuses. It runs Wi-Fi 7 at a 6.45 Gbps device rate, supports up to 1024 users, and it uses built-in omnidirectional antennas.

Huawei AP772 specifications

What sets this model apart is the 4x4 5 GHz radio: four spatial streams instead of two, which lifts both speed and capacity.

  • 5 GHz radio: 4x4 MIMO, channels up to 160 MHz, 30 dBm transmit power.
  • 2.4 GHz radio: 2x2 MIMO, channels up to 40 MHz, 28 dBm transmit power.
  • 6.45 Gbps combined device rate.
  • 130 recommended users, up to 1024 maximum.

Capacity for crowded spaces

When hundreds of visitors join one access point, capacity matters more than reach. Four streams on 5 GHz let the AP772 serve more phones at the same moment before each user's speed drops. That makes it a good match for shopping promenades, event squares and small stadium stands, where a 256-user AP runs out of room. Huawei still recommends 130 users per unit for a comfortable experience, so for a crowd of a thousand, spread several units across separate poles.

10GE fiber and 2.5GE copper

A 6.45 Gbps radio needs an uplink to match. The AP772 has a 10GE SFP+ port that auto-negotiates at GE, 2.5GE or 10GE, plus a 2.5GE RJ45 port. On large sites you can run fiber straight from the network room to the pole, with no outdoor switch in between and no 100 m copper limit.

Two ways to power it

Use PoE 802.3bt, 802.3at or 802.3af, or a 48 V DC adapter (43.2 V to 57.6 V input range). Maximum draw is 20.4 W excluding USB. The DC option helps when the data link is fiber and there is no PoE cable at the pole.

IP68 housing for desert heat

The AP772 is rated for -40°C to +70°C and 0% to 100% operating humidity, inside an IP68 housing. It mounts on a wall or pole and weighs 2.89 kg.

Typical Saudi deployments

  • Mall plazas and outdoor shopping streets.
  • Seasonal event grounds and open-air festivals.
  • University campuses and large school yards.
  • Port terminals and logistics hubs, for scanners and phones between container rows.

eKit line and switch compatibility

The AP772 is part of HUAWEI eKit, the sub-brand Huawei created for distribution partners and small and medium businesses, not the AirEngine line used in large enterprise networks. Any PoE switch with at least 802.3at will power it, or use an SFP+ switch port for fiber with a DC adapter at the pole.

AP772, AP772E or AP771?

The AP772 and AP772E share the same radios, speed, ports, power options and IP68 rating. The only difference is the antenna: the AP772 uses omnidirectional antennas (5 dBi per chain), while the AP772E uses directional antennas (10 and 11 dBi per chain) for 250 m and weighs 2.76 kg. The AP771 is 2x2 on both bands, 3.57 Gbps, up to 256 users, one 2.5GE port and IP65. Choose the AP772 for all-around coverage from a pole in the middle of a busy space.

Frequently Asked Questions

Can the Huawei AP772 run without PoE?

Yes. It accepts a 48 V DC adapter (43.2 V to 57.6 V) as well as PoE 802.3bt/at/af.

What is the 10GE SFP+ port for?

It lets you run fiber straight from the network room at up to 10GE, beyond the 100 m copper limit, so the radio is never held back by its uplink.

How many users does the AP772 support?

Up to 1024 connected users, with 130 recommended by Huawei for the best experience.

Specifications

  • Model: AP772
  • Part number: 50088137
  • Product line: HUAWEI eKit (eKitEngine), Huawei's distribution and SME line
  • Type: Outdoor access point
  • Wi-Fi standard: Wi-Fi 7; 2.4 GHz: 802.11b/g/n/ax/be; 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be
  • Radios: 2 (2.4 GHz and 5 GHz)
  • Max channel bandwidth: 2.4 GHz: 40 MHz; 5 GHz: 160 MHz
  • MIMO spatial streams: 2.4 GHz: 2x2; 5 GHz: 4x4
  • Antenna type: Built-in omnidirectional antennas
  • Antenna gain: 2.4 GHz: 5 dBi/chain peak (3 dBi combined); 5 GHz: 5 dBi/chain peak (3 dBi combined)
  • Max transmit power: 2.4 GHz: 28 dBm combined (25 dBm/chain); 5 GHz: 30 dBm combined (24 dBm/chain)
  • Device rate: 6.45 Gbps
  • Recommended users: 130
  • Max access users: 1024
  • Ports: 1x 2.5GE RJ45 (100M/1000M/2500M auto-sensing); 1x 10GE SFP+ optical (GE/2.5GE/10GE auto-sensing)
  • Power supply mode: PoE or DC power adapter
  • Input voltage: DC: 48 V rated (43.2 V to 57.6 V); PoE: 802.3bt/at/af
  • Max power consumption: 20.4 W (excluding USB)
  • Installation: Wall or pole
  • Dimensions without packaging: 92 x 250 x 220 mm
  • Weight without packaging: 2.89 kg
  • Operating temperature: -40°C to +70°C (max derated 1°C per 300 m from 1800 m to 5000 m)
  • Humidity: Operating: 0% to 100% RH; storage: 5% to 95% RH, non-condensing
  • Ingress protection: IP68

Features

  • Wi-Fi 7 at 6.45 Gbps: a 4x4 5 GHz radio with 160 MHz channels plus a 2x2 2.4 GHz radio.
  • Up to 1024 users (130 recommended): built for crowded plazas and event grounds.
  • 10GE SFP+ fiber port plus 2.5GE copper: long fiber runs straight to the AP with no uplink bottleneck.
  • PoE 802.3bt/at/af or a 48 V DC adapter: power it from whatever the site offers, 20.4 W peak.
  • IP68 housing rated for -40°C to +70°C: ready for exposed poles through a Saudi summer.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌