DSPPA DSP112 6W Wall Mount PA Speaker, Horizontal or Vertical

60.11

Product description


The DSPPA DSP112 is a 6W wall speaker for PA systems with a 4.5-inch driver and five taps across 70V and 100V lines. It suits hotel corridors, office buildings, malls and schools that need clear paging at many points.

====

The DSPPA DSP112 is a compact wall speaker for public address systems, rated at 6W with a 4.5-inch driver. It has five taps across 70V and 100V lines and mounts either horizontally or vertically. DSPPA positions it for hotels, commercial buildings, malls, schools and entertainment venues: places that need many speakers spread out for clear paging rather than a few loud ones.

DSPPA DSP112 specifications

From the official datasheet:

  • Driver: 4.5 inches.
  • Rated power: 6W.
  • 70V taps: 1.5W, 3W, 5W.
  • 100V taps: 3W, 6W.
  • Sensitivity 91±2 dB; max SPL 98±2 dB at 1m.
  • Size 277 x 180 x 80 mm; weight 0.95 kg.

Taps that set the level point by point

A long hotel corridor needs more level than a small service room. With the DSP112 you choose the tap per speaker: 1.5W for a quiet spot close to listeners, 6W for a wider corridor or lobby. Lower taps also let you hang more speakers on one amplifier, because the line load is simply the sum of the taps you picked.

Horizontal or vertical, and slim on the wall

Hanging holes on the back let you mount the speaker in either orientation. Vertical works on columns and narrow wall sections between doors; horizontal suits the space above a doorway. At 80 mm deep it does not stick out into a corridor, and the engineering plastic housing is specified by DSPPA to resist warping and fading.

Typical uses in Saudi Arabia

  • Hotel corridors in Makkah, Madinah and Riyadh: emergency paging and soft background music.
  • Office towers and commercial buildings: floor-by-floor staff announcements.
  • Malls and retail stores: promotions and customer calls.
  • Schools: the morning broadcast in hallways and staff rooms.

Connecting to an amplifier

The DSP112 works with any amplifier that has a 70V or 100V line output. Wire the speakers in parallel on the line and add up the taps to size the amplifier. Twenty speakers on the 3W tap need 60W; twenty on the 6W tap need 120W. Pick an amplifier rated above the total.

Taps depend on the line: 3W and 6W on 100V, 1.5W, 3W and 5W on 70V. In larger buildings, split speakers into zones, one per floor or hotel wing, so a page can go to one area instead of the whole building.

DSP112 or DSP117?

Both use a 4.5-inch driver. The differences, from each model's official datasheet:

  • Power: 6W on the DSP112, 10W RMS on the DSP117.
  • Max SPL: 98±2 dB versus 100±2 dB.
  • Top frequency: 18kHz on the DSP112, 15kHz on the DSP117.
  • Shape: the DSP112 is tall (277 x 180 x 80 mm) and mounts either way; the DSP117 is wider and shorter (188 x 228 x 101 mm).
  • Taps: published for the DSP112, not listed in the DSP117 datasheet.

Choose the DSP112 for corridors and hotels, and the DSP117 for classrooms and halls that need a little more level.

Frequently Asked Questions

Can the DSP112 be mounted vertically?

Yes. The hanging holes allow horizontal or vertical mounting, according to the official datasheet.

What is the lowest power setting?

The 1.5W tap on a 70V line, which suits small rooms and quiet areas.

Specifications

  • Model: DSP112
  • Type: PA wall mount speaker
  • Driver: 4.5" x 1
  • Rated power: 6W
  • 70V taps: 1.5W / 3W / 5W
  • 100V taps: 3W / 6W
  • Sensitivity (1W/1m): 91±2 dB
  • Max SPL (1m): 98±2 dB
  • Effective frequency range: 180Hz - 18kHz
  • Size (H x W x D): 277 x 180 x 80 mm
  • Weight: 0.95 kg
  • Material: Engineering plastic, anti-deformation and anti-fading
  • Mounting: Wall mount, horizontal or vertical via hanging holes

Features

  • Five taps on two lines: 1.5W, 3W and 5W at 70V; 3W and 6W at 100V, so each speaker gets the right level.
  • Hanging holes for horizontal or vertical mounting: fit it to the wall or column shape.
  • Only 80 mm deep at 277 x 180 mm: sits close to the wall in narrow corridors.
  • 180Hz to 18kHz response and 91±2 dB sensitivity: speech stays intelligible.
  • Engineering plastic that resists warping and fading: keeps its look in public areas.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌