DSPPA MAG6804 4-Channel Network Audio Terminal with Dual LAN

4429.48

Product description


The DSPPA MAG6804 receives audio from the PA server over your LAN and delivers it on 4 line-level (1V) outputs that feed separate amplifiers. It suits schools and complexes moving an existing PA system onto the network without replacing the amplifiers already installed.

====

The DSPPA MAG6804 is a 4-channel network audio terminal. It takes paging, background music and alarm audio from the PA server over your LAN and delivers it on four separate line outputs at 1V. There is no power amplifier inside. Each output feeds an existing 100V amplifier, so a school, mall or hospital can move its traditional PA system onto the network and keep the amplifiers already in the rack.

DSPPA MAG6804 key specs

Everything is digital and runs over TCP/IP. Setup happens remotely in the management software, which is why the unit has no front-panel controls.

  • 4 line outputs at 1V, usable all at once or configured from 1 to 4.
  • Dual 10/100 Mbps network ports with a redundant design.
  • MP3, WAV and PCM decoding up to 48 kHz / 16-bit.
  • 24V DC output and a short-circuit output, both triggered by the host.
  • Built-in monitor speaker with adjustable level.
  • 483 × 273 × 44 mm.

One terminal, four amplifier feeds

Many networked PA layouts need a receiver for every amplifier. The MAG6804 replaces four of them with a single unit, saving rack space, switch ports and power outlets. The second network port adds redundancy: if one path drops, the terminal stays connected. It can also link another 100M network device.

Emergency input and override outputs

An EMC input accepts the audio signal from a fire control panel, and an EMC link output passes it on to an emergency amplifier. During urgent paging the server can switch the 24V output or the short-circuit output, each controlled separately, to drive external devices. A built-in watchdog keeps the unit running reliably around the clock. Network audio is decoded with a signal-to-noise ratio of 70 dB or better and no more than 0.2% distortion.

Where it fits in Saudi buildings

  • Schools: move the morning assembly broadcast and class bells onto the network while keeping the classroom and courtyard amplifiers.
  • Malls and shopping centers: corridor background music and visitor announcements from one control room.

Works with the DSPPA MAG6000 system

The terminal belongs to the DSPPA MAG6000 IP network PA system and plays music, paging and alarms sent from its host. On the output side, any amplifier with a line (AUX) input that accepts 1V will work, including DSPPA MP-series mixer amplifiers.

MAG6804, MAG6801 or an IP amplifier?

The MAG6801 is the single-channel version from the same family, meant for one amplifier. Pick the MAG6804 when four amplifiers sit in the same rack room. For a new installation, an IP amplifier such as the 60W MAG6806 or the 120W MAG6812 combines network decoding and amplification in one box and drives 100V speakers directly.

Frequently Asked Questions

Does the DSPPA MAG6804 have a built-in amplifier?

No. It outputs 1V line-level audio on 4 channels, so each channel needs an amplifier to drive speakers.

How many amplifiers can one MAG6804 feed?

Up to four, one per channel, and all four channels can play at the same time.

What happens if one network cable fails?

The unit has two network ports with a redundant design. Wire them to separate paths and it stays online if one fails.

Specifications

  • Model: MAG6804
  • Type: 4-channel network audio terminal (no built-in amplifier)
  • System: DSPPA MAG6000 IP network PA system
  • Channels: 4 (configurable 1 to 4 outputs; all four can output simultaneously)
  • Network: Dual 10/100 Mbps auto-negotiating ports, redundant design; expansion port for another 100M device
  • Decoding: MP3, WAV, PCM up to 48 kHz / 16-bit
  • CH1-CH4 rated output (EMC): 1 V
  • EMC SNR / THD: ≥70 dB / ≤0.1% (1 kHz)
  • EMC link-out: Equal to line-in (±10%)
  • EMC input dynamic range: ≥26 dB
  • CH1-CH4 rated output (network MP3): 1 V
  • MP3: THD / response / SNR: ≤0.2% / 50 Hz - 20 kHz / ≥70 dB
  • Alarm output: Controlled by host software
  • COM 24V output: 24V
  • COM short-circuit output: Less than 1Ω
  • Built-in monitor speaker: Adjustable level
  • Other: Built-in watchdog, remote configuration via management software, customizable protocol interface
  • Unit dimensions: 483 × 273 × 44 mm
  • Net weight: 3.3 kg

Features

  • 4 simultaneous 1V line outputs: one terminal feeds four amplifiers instead of four separate receivers.
  • Dual 10/100 Mbps network ports with redundancy: the unit stays online if one network path fails.
  • MP3, WAV and PCM decoding up to 48 kHz / 16-bit: clean audio for paging and background music.
  • 24V DC output plus a short-circuit output under 1Ω: host-controlled triggers for external devices during paging.
  • Configured from management software, with a built-in monitor speaker: no front-panel controls needed, and technicians can listen in the rack room.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌