DSPPA PL208 Dual 8" Passive Line Array Speaker, 400W
3112.65ر.س
Product description
The DSPPA PL208 is a passive full-range line array module with two 8" woofers and a 1.75" compression driver, rated 400W with 124 dB max SPL. It suits auditoriums, theaters and indoor event halls and is driven by an external power amplifier.
====
In a long hall, two speakers on stands are not enough: the front rows get blasted while the back rows strain to hear. The DSPPA PL208 line array module is built to fix that. It is a passive full-range box with two 8-inch woofers and a 1.75-inch compression driver, designed to be flown or stacked with identical units into an array that covers the room front to back. It is rated 400W, peaks at 124 dB, and DSPPA positions it for indoor venues.
DSPPA PL208 specifications
These figures come from DSPPA's product page and official datasheet:
- Configuration: 2× 8" woofers plus a 1.75" (44 mm) compression driver.
- Frequency response: 70Hz to 18kHz (±3 dB).
- Sensitivity 98±2 dB, maximum SPL 124±2 dB.
- Rated power 400W, input impedance 8Ω.
- Coverage 120° horizontal × 20° vertical.
- Size 260×655×370 mm, net weight 20.1 kg.
How a line array covers a room
Each module spreads sound 120° wide to cover the width of the hall, while a narrow 20° vertical pattern keeps energy off the ceiling and floor. Hang several modules in a column, angle each one slightly differently, and you get continuous coverage that keeps near and far seats at similar levels. The quick angle adjustment on both sides of the PL208 makes that setup fast, whether flown or ground-stacked.
Passive design: plan your power amplifier
There is no built-in amplifier in the PL208. Drive it with a power amplifier sized for 400W at 8Ω, and let your sound engineer decide how many modules share a channel based on the final impedance. The crossover is built in, so the signal is split between the woofers and the compression driver inside the box.
A cabinet made for rigging and transport
Its enclosure is high-density plywood finished in wear-resistant polyurea, the coating commonly used on touring and theater boxes because it shrugs off scuffs during rigging. At 20.1 kg per module, it is easier to lift and hang than larger line array boxes.
Typical venues in Saudi Arabia
- University lecture theaters and auditoriums.
- Large hotel conference halls in Riyadh and Jeddah.
- Indoor wedding and event halls.
- Multi-purpose halls in compounds and cultural centers.
What to settle with your sound engineer
- Hall length, width and the height of the rigging point.
- How many PL208 modules per side, flown or stacked on a subwoofer.
- Power amplifier rating and channel count for the number of 8Ω modules.
- Whether music and events call for a subwoofer.
- The rigging accessories and how they attach to the ceiling.
PL208 with PL208S, or PL210?
For events that need deep bass, add the PL208S subwoofer: an 18" driver covering 45Hz to 250Hz at 800W, filling in below the PL208's 70Hz limit. The PL210 is the larger full-range model in the same family: two 10" woofers and a 3" driver, response from 50Hz, 650W, 128 dB max SPL, 10° vertical coverage and 31 kg. Pick the PL208 for medium halls and the PL210 for bigger rooms and longer throws.
Frequently Asked Questions
Does the PL208 need an amplifier?
Yes. It is passive with no internal amp, so it needs a power amplifier suited to 400W at 8Ω.
How many PL208 modules does a hall need?
It depends on the room length and audience size. Each module covers 120° by 20°, and your sound engineer sets the count and angles.
Do I need a subwoofer with the PL208?
For speech it usually stands alone, as it reaches down to 70Hz. For music and events, add the PL208S subwoofer covering 45Hz to 250Hz.
Specifications
- Model: PL208
- Type: Passive line array full-range speaker
- System configuration: 2×8" LF, 1×1.75" HF
- HF driver: 44 mm compression driver
- Crossover: Built-in precision crossover network
- Frequency response (±3 dB): 70Hz-18kHz
- Sensitivity: 98±2 dB
- Max SPL: 124±2 dB
- Input impedance: 8Ω
- Rated power: 400W
- Coverage (H×V): 120°×20°
- Dimensions (H×W×D): 260×655×370 mm
- Net weight: 20.1 kg
- Cabinet: High-density plywood, wear-resistant polyurea coating
- Rigging: Quick angle adjustment on both sides for flying or stacking
- Application: Indoor venues such as auditoriums and multi-purpose halls
Features
- Two 8" woofers and a 1.75" (44 mm) compression driver: full-range output from 70Hz to 18kHz.
- 400W rated, 124±2 dB max SPL: level that reaches the back rows.
- 120° horizontal × 20° vertical coverage: wide audience spread with less ceiling spill.
- Quick angle adjustment on both sides: fly or stack several modules fast for continuous coverage.
- High-density plywood cabinet with polyurea coating: stands up to repeated rigging and transport.
