DSPPA DSP3254EN 10W EN54 Fireproof Ceiling Speaker, 100V
209.71ر.س
Product description
The DSPPA DSP3254EN is a ceiling speaker for voice evacuation systems, with a 6.5-inch driver rated at 10W on 100V lines and 2.5W, 5W and 10W taps. It has a stamped steel housing and ceramic terminals, and DSPPA states it complies with EN54-24, making it a fit for hotels, schools, offices and factories.
====
The DSPPA DSP3254EN is a ceiling speaker built for voice evacuation systems, and DSPPA states that it complies with the EN54-24 standard. It carries a 6.5-inch driver rated at 10W on a 100V line, protected by a stamped steel housing, ceramic terminals and a fire-resistant wire case. Day to day it plays background music and announcements; in an emergency it carries evacuation messages from the PAVA system.
DSPPA DSP3254EN specs
- Driver: 6.5-inch full range with a moisture-resistant paper cone.
- Power: 10W, with 2.5W, 5W and 10W taps on 100V.
- Sensitivity: 91.7dB ±2dB; max SPL 101.7dB ±2dB.
- Frequency response: 90Hz to 20,000Hz.
- Ceiling cutout: Ø185 to Ø200mm.
- Size: 141 × Ø211mm; weight 1.6kg.
What makes it a fire-rated speaker
Evacuation speakers need to keep working while a fire is nearby. That is why the DSP3254EN uses a stamped steel body that resists deformation, ceramic terminals instead of plastic, and a fire-resistant wire case. Together they lower the risk of the line failing under heat, so the other speakers on the same circuit keep broadcasting.
Choosing the tap
Use 2.5W for offices and hotel rooms, 5W for corridors and 10W for lobbies or warehouses with background noise. At 91.7dB sensitivity it stays audible even on low taps, which saves amplifier power and lets you put more speakers on each zone.
Installation
Cut a hole between 185 and 200mm, push the speaker in, and the spring clips hold it in place. The unit is 141mm deep, so check the void above the false ceiling first, especially in corridors packed with AC ducts. Land the incoming and outgoing line on the ceramic terminals, and keep every joint inside a speaker or a proper junction box rather than loose in the void.
One speaker, two jobs
Most of the time there is no emergency, and the speaker works as part of the building's everyday sound: lobby music, staff paging, prayer time announcements. A 6.5-inch driver reaching down to 90Hz keeps that daily use easy on the ear. When an alarm triggers, the evacuation controller cuts normal audio and sends the message over the same speakers, so you do not need two separate speaker networks.
Applications in Saudi Arabia
- Hotels in Makkah, Madinah and Riyadh: floor corridors and lobbies.
- Schools and universities: classrooms and corridors on the PA system.
- Offices and commercial towers: open-plan floors and meeting rooms.
- Factories and warehouses: admin areas and covered walkways.
- Hospitals and malls: projects where the consultant specifies EN54 speakers.
Working with PAVA systems
It runs on any amplifier or evacuation controller with a 100V output, such as the DSPPA PAVA9500. DSPPA lists no 70V taps for this model.
DSP3254EN or DSP2254EN?
Both deliver 10W with 2.5W, 5W and 10W taps on 100V. The DSP2254EN adds a steel fire dome, an aluminium grille and a thermal fuse, with 90dB sensitivity, a 350Hz to 18,000Hz response and a 1.11kg weight. The DSP3254EN covers a wider 90Hz to 20,000Hz range with 91.7dB sensitivity and 101.7dB max SPL, so it is the better pick when background music is part of everyday use.
Frequently Asked Questions
Is the DSP3254EN EN54 certified?
DSPPA states it complies with EN54-24.
Does it work on a 70V amplifier?
Published taps are for 100V lines only (2.5W, 5W and 10W); DSPPA lists no 70V taps for this model.
What cutout does it need?
Ø185 to Ø200mm, with at least 141mm of depth above the false ceiling.
Specifications
- Model: DSP3254EN
- Type: In-ceiling voice evacuation speaker
- Driver: 6.5" full-range, waterproof paper cone
- Rated power: 10W
- Rated voltage and taps: 100V: 2.5W / 5W / 10W
- Sensitivity: 91.7dB ±2dB
- Frequency response: 90Hz to 20,000Hz
- Max SPL (1m): 101.7dB ±2dB
- Cutout size: Ø185 to Ø200mm
- Dimensions (H × Ø): 141 × Ø211mm
- Weight: 1.6kg
- Housing: High-grade stamped steel
- Terminals and wiring: Ceramic terminals, fire-resistant leaded wire case
- Transformer: Built-in 100V transformer
- Mounting: Spring clips
- Standard: Complies with EN54-24
Features
- Complies with EN54-24 per DSPPA: suits voice evacuation projects that specify this standard.
- 6.5-inch driver with 90Hz to 20,000Hz response: clear paging and background music in normal operation.
- 10W with 2.5W, 5W and 10W taps on 100V: match the level to each room's size and noise.
- Stamped steel housing, ceramic terminals and fire-resistant wire case: keeps the connection intact under high heat.
- Ø185 to Ø200mm cutout with spring clips: quick fitting in a false ceiling.
