Uniview PKC5601-C4Z-LED44-IR ANPR Pole with IR and Display
5537.61ر.س
Product description
The Uniview PKC5601-C4Z-LED44-IR is a ready-to-install ANPR pole for car park lanes: a 4MP camera with a 2.8-12 mm lens, an LED display, a speaker and two infrared LEDs that light plates up to 50 m without any visible glare. It suits hospitals, malls and towers that run their parking around the clock.
====
The Uniview PKC5601-C4Z-LED44-IR is designed for an entry or exit lane that never closes. Its 4MP camera reads the plate, an LED display shows the result to the driver, a relay opens the barrier, and at night two infrared LEDs light the plate up to 50 m with no light the eye can see. That makes it a good match for hospital, mall and tower car parks, where every driver looks straight at the pole and glare is the last thing you want.
Infrared instead of visible light
The IR suffix means the pole carries two infrared LEDs. They switch on automatically when light falls and off again in daylight. Because the light is invisible, approaching drivers see no glare and neighboring windows stay dark. The camera backs this up with 0.0005 Lux sensitivity and 120 dB WDR, which matters at basement ramps where bright sunlight meets a dark car park.
How the Uniview PKC5601-C4Z-LED44-IR works at the gate
- A car approaches at up to 30 km/h and is captured at a 99%+ rate.
- The plate is read on the device at 98%+ recognition; Saudi Arabia is among the supported countries.
- The plate is checked against the allowlist or blocklist (up to 20,000 entries each).
- A relay output opens the barrier and the display shows a red, green or yellow message.
You choose one of four opening policies: recognized vehicles, all vehicles, allowlist only, or all except the blocklist. These rates apply with the recommended installation and lighting.
Camera and lens
A 1/1.8" sensor delivers 2688×1520 at up to 60 fps through a 2.8-12 mm lens with a 106.4° to 50.3° horizontal view. Set the zoom to match lane width, then aim the ball-head mount: 360° horizontal and -20° to +20° tilt. Images go to a microSD card up to 512GB, and ANR fills recording gaps after a network outage.
Connecting the barrier and parking software
The pole has one 10/100M RJ45 port, two RS485 ports, two relay outputs, two digital inputs and Wiegand output. Wire it to a Uniview barrier or any barrier that takes a relay signal, and link it to an NVR or parking platform through ONVIF Profile S, G and T, or through the SDK and API. It runs on 100-240 VAC, so plan a power point at the lane island.
Talk-back to security
The 304×304 mm display runs at 1500 cd/m² with a 120° viewing angle, and below it sit an 8 Ω, 5 W speaker and a call button. If a plate is rejected or too dirty to read, the driver calls the security room directly.
Typical Saudi installations
- Hospital and clinic car parks in Riyadh and Jeddah: an allowlisted lane for medical staff.
- Mall and tower basements that run day and night.
- Hotels: one lane for guests, another for service vehicles.
- Warehouses and factories: a log of trucks with type and color.
PKC5601-C4Z-LED44-IR or PKC5601-C4Z-LED44-WH?
Camera, lens, display, interfaces and IP54 rating are identical. Lighting is the only difference: the IR uses two invisible infrared LEDs, the WH uses two visible warm-light LEDs, and both reach 50 m. Choose the IR next to homes or wherever you want discreet lighting; choose the WH if you want a visibly lit gate.
Frequently Asked Questions
Does the PKC5601-C4Z-LED44-IR need a PC to read plates?
No. Recognition, list checks and barrier control all happen on the device. Software or an NVR is optional for archiving and central management.
Can it drive a barrier from another brand?
Yes, as long as the barrier accepts a relay open signal. The pole has two relay outputs (AC 125V/0.3A, DC 30V/1A) plus RS485 and Wiegand.
Will drivers see the night lighting?
No. The IR version uses two invisible infrared LEDs with 50 m range. For visible lighting, choose the PKC5601-C4Z-LED44-WH.
Specifications
- Model: PKC5601-C4Z-LED44-IR
- Device type: Pole-Mount Capture and Display Unit (ANPR)
- Image sensor: 1/1.8" progressive scan CMOS, 4MP
- Lens: 2.8-12 mm
- Shutter: Auto, 1/200 to 1/100000 s
- Minimum illumination: 0.0005 Lux @ F1.4
- Field of view: H 106.4°-50.3°, V 57.1°-27.8°, D 127.4°-57.3°
- WDR: 120 dB
- S/N ratio: > 50 dB
- Illuminator: 2 IR LEDs, 50 m range, auto on/off
- Video compression: H.264 (default), H.265
- Max resolution and frame rate: 2688×1520 @ 60/50/30 (default)/25 fps, adjustable down to 1 fps
- Main stream: 2688×1520, 1080P (default), 720P, D1
- Sub stream: 720P (default), D1, 2CIF, CIF
- Third stream: D1 (default), 2CIF, CIF
- Image enhancement: AI ISP, ROI up to 8 areas, HLC, BLC, digital defog, 3D DNR
- OSD: 8 video OSD areas, 8 image OSD areas
- Display: 4 lines, up to 32 letters, 304×304 mm, red/green/yellow
- Display brightness and viewing angle: 1500 cd/m², 120° horizontal and vertical
- Display module: 64×64, P4.75 pixel pitch
- Audio: 8 Ω 5 W speaker, intercom, physical two-way audio button, 1 audio in, 1 audio out
- Application: Entrances and exits, vehicle speed up to 30 km/h
- Plate recognition: Alphanumeric; supported countries include Saudi Arabia, UAE, Qatar and Bahrain
- Vehicle attributes: 10 vehicle types, 12 colors, 133 manufacturers
- Allowlist / blocklist: Up to 20,000 plates each, import/export
- Barrier opening policy: Recognized vehicles, all vehicles, allowlist only, all except blocklist
- Performance rates: Capture ≥ 99%, recognition ≥ 98%, direction accuracy ≥ 98% (recommended installation and lighting)
- Edge storage: microSD up to 512GB, ANR
- Network port: 1× RJ45 10/100M
- Protocols: IPv4, IPv6, HTTP, HTTPS, RTSP, DHCP, NTP, SNMP, 802.1x, SSH, SSL/TLS and more
- Integration: ONVIF Profile S, G, T; SDK; API
- Other interfaces: 2× RS485, 2× relay out (AC 125V/0.3A, DC 30V/1A), 2× digital in (up to DC 5V), Wiegand out, microSD slot, reset button
- Bracket and camera adjustment: Ball head; 360° horizontal, -20° to +20° vertical; junction box for tail cable
- Column: Galvanized pipe, φ60×1300 mm, 2 mm wall
- Base: Iron, 5 mm thick, φ170 mm (φ177 mm with cover)
- Power supply: 100-240 VAC
- Dimensions: 334×365.3×1506.5 mm
- Operating conditions: -30°C to 60°C, ≤ 90% RH, no heater
- Ingress protection: IP54
- Certifications: CE, FCC (EMC); EN IEC 62368-1, UL 62368-1; CE-RoHS; WEEE; NDAA compliant
- In the box: Pole-mount capture and display unit, 3 expansion bolts, 2 cross screws, 4 hex screws with washers, L-key, 2 pole decorative covers, product documents
Features
- Infrared LEDs with 50 m reach: plates are read at night with no visible light in the driver's eyes.
- 98%+ recognition at up to 30 km/h: cars roll through the lane without a long stop at the barrier.
- 4 barrier-opening policies over 2 relay outputs: decide who enters automatically and who waits for a guard.
- ONVIF Profile S, G and T plus SDK and API: connects to your parking software or recorder.
- microSD up to 512GB with ANR: entry images are kept even when the network drops.
