DSPPA DSP5311 6.5-inch Surface Mount Ceiling Speaker, 6W
84.62ر.س
Product description
The DSPPA DSP5311 screws straight onto the ceiling with no cutout, pairing a 6.5-inch driver with a 6W built-in 70V/100V transformer. It suits classrooms, warehouses, covered car parks and any building without a suspended ceiling.
====
The DSPPA DSP5311 is a round 6.5-inch ceiling speaker that mounts directly onto the ceiling surface with four screws, so there is no hole to cut. It is rated at 6W and has a built-in 70V/100V transformer, which lets it share a long PA line with dozens of other speakers. Use it where there is no suspended ceiling, or where the owner does not want the ceiling opened.
DSPPA DSP5311 specifications
These figures come from the product page and datasheet on DSPPA's official site:
- Power: 6W RMS, with short-term handling of twice that level.
- Taps: 3W or 6W on a 70V line, 6W on a 100V line.
- Sensitivity: 92±2dB; maximum SPL: 100±2dB at 1 meter.
- Frequency response: 140Hz to 16kHz.
- Size: 203.5 × 203.5 × 94mm; weight 1.0kg.
Surface mounting, no ceiling cutout
Most ceiling speakers need a gypsum or tile ceiling and a round hole to sit in. The DSP5311 does not. You screw it to a concrete or timber ceiling and route the cable to suit the site. Installers save time, and it solves the problem of older buildings where opening the ceiling is impractical: classrooms in existing schools, warehouses and underground car parks.
100V line operation for long cable runs
The built-in transformer puts the speaker on a high-voltage, low-current line. In practice, one cable can run a long distance with several speakers connected in parallel and little loss. A school with 20 classrooms and one speaker per room at 6W needs an amplifier of about 150W. Note that on a 100V line the speaker runs at 6W only; the 3W option is available on 70V lines.
Engineering plastic body, aluminum grille
DSPPA uses an engineering plastic housing that it says resists deformation and fading, with a carbon alloy aluminum grille in RAL white. The plain round shape blends into most interiors and does not draw attention in a classroom or hallway. The speaker follows the IEC 268-5 power handling standard and is rated for 100 hours of continuous operation at its rated power.
Typical DSP5311 projects in Saudi Arabia
- Schools: daily announcements and class bells in rooms and corridors.
- Warehouses and covered car parks: paging staff and drivers.
- Sports halls and multipurpose halls.
- Residential compounds, malls and supermarkets.
- Airport and rail station concourses, as listed in DSPPA's applications.
DSP5311 vs DSP5311EN vs DSP6011
The DSP5311EN keeps the surface-mount idea but is an EN54-24 certified fire alarm speaker: 12W on 100V only, an ABS V0 flame-retardant body, a ceramic connector, a thermal fuse, and a response that starts at 230Hz. Pick the DSP5311 for everyday paging and music, and the DSP5311EN when the project specification calls for EN54 speakers on a voice evacuation system. If you do have a suspended ceiling, the DSP6011 offers the same 6W in a flush unit that fits a 165 to 170mm cutout and weighs only 0.6kg.
Frequently Asked Questions
Does the DSP5311 need a ceiling cutout?
No. It screws onto the ceiling surface with four screws, so it works on concrete ceilings and in buildings without a suspended ceiling.
Will the DSP5311 work with a 100V amplifier?
Yes. Its built-in transformer runs at 6W on 100V lines and at 3W or 6W on 70V lines.
Is the DSP5311 approved for fire alarm systems?
DSPPA does not list EN54 approval for this model. For voice evacuation, choose the DSP5311EN, which is certified to EN54-24.
Specifications
- Model: DSP5311
- Type: Surface mount ceiling speaker
- Driver: 6.5 in × 1, full range
- Rated power (RMS): 6W
- Rated voltage / taps: 70V (3W / 6W), 100V (6W)
- Sensitivity (1m, 1W): 92±2 dB
- Max SPL (1m): 100±2 dB
- Frequency response: 140Hz to 16kHz
- Distortion: THD < 5% (1W, 1m, 100Hz to 10kHz)
- Dimensions (H × W × D): 203.5 × 203.5 × 94 mm
- Weight: 1.0 kg
- Materials: Engineering plastic body, carbon alloy aluminum grille with RAL white finish
- Mounting: Surface mount, no cutout, 4 screws
- Power handling standard: IEC 268-5 (PHC)
Features
- Surface mounting with 4 screws: no suspended ceiling or cutout needed, so it suits concrete ceilings and existing buildings.
- Built-in 70V/100V transformer: 3W and 6W taps on 70V, 6W on 100V, so dozens of speakers share one PA line.
- 92±2dB sensitivity and 100±2dB max SPL: clear paging in a classroom or corridor from just 6W.
- 140Hz to 16kHz response: tuned for speech and background music.
- IEC 268-5 power handling: 100 hours of continuous operation at rated power, with short bursts at twice that level.
