DSPPA DMA60M 6-Zone Paging Station for DMA6112/DMA6124 Matrix

1142.69

Product description


The DSPPA DMA60M is a glass-panel desk paging microphone designed for the DMA6112 and DMA6124 six-zone matrix amplifiers. It connects over a network cable up to 600 m long and draws power from the amplifier, making it a fit for hotels, event halls and offices that combine paging, background music and wall control panels.

====

The DSPPA DMA60M is the paging microphone DSPPA built for its DMA6112 and DMA6124 matrix amplifiers. The amplifier drives six zones from a 4.3-inch touch screen; the DMA60M adds a paging point at reception or the security desk, linked by a network cable of up to 600 m with no power adapter.

How the DSPPA DMA60M fits a matrix system

DSPPA's matrix system has three parts: the DMA6112 or DMA6124 amplifier, DMA60W Bluetooth wall touch panels, and the DMA60M paging mic. The amplifier has two RJ45 ports for paging mics and six wall panel ports, each tied to a fixed zone address.

  • A wall panel changes the source and volume of its own zone only.
  • The DMA60M pages any single zone or all zones at once.
  • Paging sits above the Bluetooth panels in priority, so an announcement gets through even while someone is playing music from a panel.

Glass touch panel

Every key is a touch key on a glass panel with an anti-fingerprint coating. Zone keys 1 to 6 sit in the center, with the all-zone, talk and chime keys below; the chime is a single falling tone. An AUX/MP3 volume knob and a source switch key let you adjust background music across the zones from the desk. A 4-segment level meter helps you find the right distance from the mic, and key lock prevents tampering.

Wiring, power and setup

The mic takes power and audio from the amplifier. Use CAT5e or better with no more than 12 ohms per 100 m. A single station reaches 600 m. On the back are 8 DIP switches: DIP 4 enables override, and DIP 8 must be set to H for use with the DMA6112 and DMA6124. The mic set to address 6 has the highest priority.

Uses in Saudi Arabia

  • Hotels in Makkah and Madinah: reception pages the restaurant or meeting room while staff in each area adjust their zone's music from a wall panel.
  • Wedding and event halls: the men's hall, women's hall and entrance run as separate zones, and a call reaches one hall only.
  • Offices: the front desk pages a single floor.
  • Clinics and medical centers: calls go to the waiting area while quiet music plays in the corridors.

Compatible amplifiers

DSPPA lists the DMA60M for the DMA6112 (6×120W) and DMA6124 (6×240W). For the DMA6250U series six-zone amplifiers, the matching paging station is the DMA20.

DMA60M or DMA20?

Both mics share the same body and audio specs: 30 mV sensitivity, 200 Hz to 15 kHz response, S/N of 70 dB or better, 172×160×53 mm and 0.89 kg. The real differences:

  • Host: the DMA60M is for the DMA6112/DMA6124 matrix; the DMA20 is for the DMA6250U series.
  • Chime: one falling tone on the DMA60M; rising and falling tones on the DMA20.

Frequently Asked Questions

Does the DMA60M work with the DMA6350U?

DSPPA does not list it. The DMA60M is for the DMA6112 and DMA6124 matrix amplifiers; for the DMA6250U series, including the DMA6350U, choose the DMA20.

What is the difference between the DMA60M and the DMA60W?

The DMA60M is a desk paging mic for one zone or all zones. The DMA60W is a Bluetooth wall panel that sets the source and volume of its own zone, and paging overrides it.

Specifications

  • Model: DMA60M
  • Type: 6-zone remote paging station (desk microphone)
  • Compatible amplifiers: DSPPA DMA6112 and DMA6124 matrix amplifiers
  • Sensitivity: 30±3 mV
  • Frequency response: 200 Hz to 15 kHz
  • S/N ratio: ≥70 dB
  • RJ45 port: Dual RJ45 for communication and audio, RS485 protocol
  • Panel keys: 6 touch zone keys, source switch, all-zone key, talk key, chime key
  • Indicators and controls: 4-segment level meter, power LED, AUX/MP3 source LED, AUX/MP3 volume knob, mic gain control, power switch
  • Microphone: Mic head with light ring, angle-adjustable stem, 5-pin XLR connector
  • Chime: One falling chime tone
  • DIP switches: 8 switches; DIP 4 = override, DIP 8 must be set to H on DMA6112/DMA6124
  • Priority: Address 6 has the highest priority
  • Distance: Up to 600 m for one station
  • Cable: CAT5e or better, ≤12 Ω per 100 m
  • Power: From the host amplifier, no adapter
  • Unit dimensions (H×W×D): 172×160×53 mm
  • Net weight: 0.89 kg

Features

  • 6 touch zone keys plus all-zone paging: call one hall or the whole building from the same mic.
  • Up to 600 m for a single station on CAT5e: the mic stays at reception while the amp lives in the rack room.
  • Priority above the DMA60W Bluetooth wall panels: paging cuts in over music a guest is controlling in that zone.
  • Powered from the amplifier: no adapter and no wall socket needed at the desk.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌