DSPPA POE6463W PoE Network Wall Mount Speaker with Display
1772.09ر.س
Product description
The DSPPA POE6463W is a PoE network wall speaker with a 6.5-inch woofer and 1-inch tweeter, local USB, SD, AUX and microphone inputs, a digital display and an IR remote. It suits classrooms, meeting rooms and waiting areas that receive central announcements but also need their own audio.
====
A classroom or training room needs a speaker that takes the school-wide announcement and can also play a lesson recording or carry the teacher's voice. The DSPPA POE6463W puts all of that in one wall box powered over a single PoE cable: a 6.5-inch woofer and 1-inch tweeter, USB and SD slots for MP3 playback, AUX and microphone inputs, a digital display and an IR remote.
DSPPA POE6463W specifications
- 6.5-inch woofer and 1-inch tweeter.
- Maximum SPL 102 ±2 dB, sensitivity 90 ±2 dB.
- Frequency response 85 Hz to 20 kHz.
- PoE to IEEE 802.3af/at over CAT5 or CAT5e cable up to 100 m.
- 310 x 215 x 200 mm.
Local sources alongside central paging
When the system host is not streaming, the speaker plays MP3 files from a USB stick or SD card. The AUX input takes an external source such as a DVD player or radio, and the microphone input handles local paging inside the room. For more volume, AUX OUT sends the signal to a larger amplifier. In a long room, an 8-ohm sub speaker on the rear output spreads sound to the far end, so each room runs on its own day to day while staying part of the building-wide PA.
Digital display and IR remote
The display and LED indicators show the working state at a glance. From the remote you pick the source (AUX, MIC or MP3), adjust volume, view or change the IP address, start USB playback and set bass and treble from 0 to 15. Day-to-day settings need no PC.
Ports for linking other systems
On the back you get a 100V audio input rated at 30W for a signal from another system's amplifier, an EMC emergency output, a short-circuit output, an 8-ohm sub speaker output and a port for a colour-screen on-demand terminal.
Typical uses in Saudi Arabia
- Classrooms: the school broadcast from the admin office, plus a lesson track from USB in the same period.
- Small meeting and training rooms: a local mic without a separate sound system.
- Clinic and bank waiting areas: calm music and announcements.
- Restaurants and cafes: a playlist straight from an SD card.
POE6463W or POE6311?
The POE6463W is a wall speaker with a 6.5-inch woofer and tweeter, a display, remote, and USB, SD, AUX and mic sources, powered by PoE only. The POE6311 is a round 185 mm ceiling speaker with a 2x9W amplifier, no display or local sources, but it accepts PoE or a 15V adapter. Walls and in-room control call for the POE6463W; false ceilings call for the POE6311.
Frequently Asked Questions
Does the POE6463W need a separate power supply?
No. It runs on PoE to IEEE 802.3af/at over CAT5 or CAT5e up to 100 m, and no adapter input is listed officially.
Can I plug in a USB stick or a microphone?
Yes. It has USB and SD slots for MP3 playback, an AUX input for an external source and a mic input for local paging.
Specifications
- Model: POE6463W
- Drivers: 6.5-inch × 1, 1-inch × 1
- Max SPL: 102 ±2 dB
- Sensitivity: 90 ±2 dB
- Frequency response: 85 Hz to 20 kHz
- Amplifier max distortion: 1%
- AUX IN: 320 mV sensitivity, 40 Hz to 20 kHz (±3 dB), ≤1% distortion, ≥75 dB SNR
- AUX OUT: 1 V output, 25 Hz to 20 kHz (±3 dB), ≤1% distortion, ≥75 dB SNR
- USB / SD / NET / MP3: 40 Hz to 20 kHz (±3 dB), ≤1% distortion, ≥70 dB SNR
- Audio decoding: MP3, up to 48 kHz / 16-bit
- 100 V audio input: 30 W rated input power (from a third-party amplifier)
- Other interfaces: MIC input, EMC emergency output, short-circuit output, 8 Ω sub speaker output, colour-screen on-demand terminal port (8-pin cable)
- Display: Digital display and LED indicators
- Control: IR remote (source, volume, IP, USB playback, bass and treble 0 to 15)
- Power and network: PoE to IEEE 802.3af/at, CAT5/CAT5e up to 100 m, TCP/IP
- Unit size (L×W×H): 310×215×200 mm
Features
- 6.5-inch woofer, 1-inch tweeter, 85 Hz to 20 kHz: comfortable speech and music in a room.
- MP3 playback from USB and SD plus AUX input: the room plays its own source when the system is idle.
- Mic input for local paging and AUX out to a bigger amplifier: a teacher or trainer speaks through the same box.
- Digital display and IR remote: change source, volume and IP address without a PC.
- PoE to IEEE 802.3af/at over CAT5/CAT5e up to 100 m: no power socket needed next to the speaker.
