DSPPA D6721S Power Sequence Controller for Audio Racks
540.58ر.س
Product description
The DSPPA D6721S sequence controller decides the order in which your audio rack receives power: sources and mixers first, amplifiers last, and the reverse at shutdown. It suits mosque control rooms, school PA racks, hotel ballrooms and conference halls where several amplifiers share one supply.
====
The DSPPA D6721S is a sequence controller that decides the order in which your audio equipment receives power. It switches devices on one after another and shuts them down in reverse, instead of starting everything at once. It suits any setup where several amplifiers share one power feed, from mosque control rooms to hotel ballrooms.
What a sequence controller does
Power up a rack full of audio gear with one switch and every device draws its start-up current at once. That spike can trip the breaker, and the amplifiers pass the mixer's turn-on thump straight to the speakers. A sequencer avoids both problems with a fixed order:
- Power on: sources, mixers and processors first, amplifiers last.
- Power off: amplifiers first, then the rest of the chain.
- A short delay between steps, so inrush currents never stack up.
On its official sequence controller pages, DSPPA states that sequenced power on and off protects amplifiers and the power supply system from damage caused by high currents.
Why an audio rack needs a sequencer
A large amplifier pulls a heavy current at switch-on. Spreading that load over several stages keeps the breaker in, and holding the amplifiers off until the mixer output has settled stops the loud pop in the speakers.
Typical installations in Saudi Arabia
- Mosques: an amplifier, mixer and wireless mic receiver in one rack, switched on every day.
- School PA: the morning assembly system starts without a thump through the speakers.
- Hotel ballrooms and wedding halls in Riyadh and Jeddah running several amplifiers and processors.
- Conference and training rooms with a processor, mic system and amplifiers in the same rack.
Compatibility and installation
The unit switches mains power and never touches the audio signal, so it works with DSPPA amplifiers and mixers and with other brands, provided the combined load stays within its rating. Connect devices to it in order, sources first and amplifiers last. For the rack itself, DSPPA makes 19-inch floor-standing cabinets in 15U, 25U, 30U and 35U heights with cooling fans.
D6721S or the DP800F control panel?
The D6721S manages power: when each device in the rack turns on and off. The DP800F is a touch screen control panel that a person in the room uses to operate the sound system itself. If your problem is speaker pops or a tripping breaker at start-up, start with the D6721S. If you want a simple interface for the hall supervisor, choose the DP800F. Larger halls often use both.
Frequently Asked Questions
Does the DSPPA D6721S affect sound quality?
No. It only switches mains power; the audio signal never passes through it.
Will the D6721S work with amplifiers from other brands?
Yes. It handles power, not audio, so any brand works as long as the combined load stays within its rating.
Specifications
- Model: D6721S
- Brand: DSPPA
- Device type: Sequence controller
Features
- Staged start-up instead of one spike: inrush current is spread over stages, so the breaker does not take every device's start-up current at once.
- Amplifiers on last, off first: the mixer's turn-on thump never reaches the speakers.
- Switches mains only, not audio: works with DSPPA or third-party amplifiers and mixers within its rating.
