DSPPA D7341 Dual-Band Ceiling Access Point for 5G WiFi Conferencing
3276.44ر.س
Product description
The DSPPA D7341 is an 802.11ac ceiling access point running 2.4GHz and 5GHz together, with up to 867Mbps on 5GHz and up to 100 wireless users. DSPPA lists it in its 5G WiFi wireless conference range, and it suits meeting and training rooms that want coverage from a single PoE cable.
====
The DSPPA D7341 is an 802.11ac ceiling access point that runs 2.4GHz and 5GHz at the same time. DSPPA lists it as the D7341T in its 5G WiFi wireless conference range, rated at up to 867Mbps on 5GHz and up to 100 wireless users. It draws power from the network cable over PoE, so it can go on a meeting-room ceiling where no power outlet exists.
DSPPA D7341 hardware at a glance
- MT7621DAT processor with an MT7615D radio chip, 128MB memory and 16MB flash.
- 2.4GHz on 802.11b/g/n up to 300Mbps; 5GHz on 802.11a/n/ac up to 867Mbps.
- Four internal antennas: two 4.6 dBi for 2.4GHz and two 4 dBi for 5GHz.
- One Gigabit WAN port with PoE input and one Gigabit LAN port.
- Under 10.5W maximum draw, 168×168×32 mm, 0.36 kg.
One cable for data and power
The WAN port accepts 802.3af PoE. If there is no PoE switch, a 12V 1A adapter works instead. Meeting rooms usually hide access points above a suspended ceiling, where running mains power to each device is awkward. With PoE, one network cable from the equipment room carries both data and power. The second Gigabit port passes the network on to a device nearby.
Built to keep running
A hardware watchdog brings the unit back automatically if it hangs. The heat sink clips on and carries a special surface coating for better cooling. The AP is rated from -10°C to 55°C, with ESD protection of ±8kV air and ±4kV contact, plus surge protection.
Status is easy to read: a tri-color LED shows red for system, green for 2.4G and blue for 5.8G, alongside WAN and LAN lights. Holding the reset button for 6 to 10 seconds restores factory settings.
Its place in the DSPPA 5G WiFi conference system
The D7301 wireless transmitter in this system has two RJ45 ports: one goes to the system host, the other to an access point. DSPPA says the transmitter supports up to 300 wireless conference units and can be expanded with additional APs. That is where the D7341 comes in, extending coverage in large halls or rooms split by partitions.
Saudi use cases
- Conference halls in hotels and government centers running wireless delegate microphones.
- Training rooms at universities and companies in Riyadh and Dammam that also need WiFi for trainees.
- Meeting rooms where running power to the ceiling is difficult.
D7341 or D7331?
The D7341 is a network device: a dual-band AP with up to 867Mbps and 100 users, PoE powered and ceiling mounted. The D7331 never touches the network; it is a 10-port USB-A, 200W charger for the system's microphones.
Frequently Asked Questions
Does it need a power outlet on the ceiling?
No. It takes 802.3af PoE on the WAN port, or a 12V 1A adapter if needed.
How many devices can connect?
DSPPA rates it for up to 100 wireless users, with up to 300Mbps on 2.4GHz and 867Mbps on 5GHz.
Specifications
- Model: D7341T (listed as D7341)
- Type: Indoor dual-band 802.11ac ceiling access point
- CPU: MT7621DAT + MT7615D
- Memory: 128MB built-in, 16MB SPI NOR flash
- 2.4GHz band: 2.4 to 2.484 GHz, 802.11b/g/n
- 5GHz band: 5.150 to 5.850 GHz, 802.11a/n/ac
- Antennas: Built-in: 2× 2.4GHz at 4.6 dBi, 2× 5GHz at 4 dBi
- Max data rate: Up to 300Mbps (2.4GHz), up to 867Mbps (5GHz)
- Max wireless users: 100
- 2.4GHz TX power: 802.11b up to 20±2dBm, 802.11g up to 19±2dBm, 802.11n HT20 up to 18±2dBm, HT40 up to 17±2dBm
- 5GHz TX power: 802.11a up to 22±2dBm, 802.11n HT20 up to 21±2dBm, HT40 up to 20±2dBm, 802.11ac VHT80 up to 19±2dBm
- 2.4GHz RX sensitivity: 802.11b down to -94dBm, 802.11g -90dBm, 802.11n HT20 -88dBm, HT40 -86dBm
- 5GHz RX sensitivity: 802.11a down to -90dBm, 802.11n HT20 -88dBm, HT40 -86dBm, 802.11ac VHT80 -85dBm
- EVM: 2.4G: 11b ≤-10dB, 11g ≤-25dB, 11n ≤-28dB; 5G: 11a ≤-25dB, 11n ≤-28dB, 11ac ≤-32dB
- Frequency offset: ±20ppm
- WAN port: 1× 10/100/1000 Mbps auto-negotiation, 48V PoE input
- LAN port: 1× 10/100/1000 Mbps auto-negotiation
- Button: Reset (hold 6 to 10 s for factory defaults)
- Indicators: WAN and LAN LEDs; tri-color LED: SYS red, 2.4G green, 5.8G blue
- Power supply: DC2.0 12V 1A or PoE 802.3af
- Max power consumption: Under 10.5W
- Dimensions: 168×168×32 mm
- Weight: 0.36 kg net
- Operating environment: -10°C to 55°C operating, -40°C to 70°C storage, 5% to 95% RH non-condensing
- Protection: ESD ±8kV air, ±4kV contact; surge 2kV common mode, 1kV differential
- Mounting: Ceiling
Features
- Concurrent dual band on 802.11ac: up to 300Mbps on 2.4GHz and up to 867Mbps on 5GHz.
- Up to 100 wireless users per DSPPA: enough headroom for attendee devices in a meeting or training room.
- PoE (802.3af) or 12V 1A DC power: a single cable from the switch runs it on the ceiling.
- Two Gigabit ports, WAN with PoE-in plus LAN: pass the network on to a nearby device.
- Hardware watchdog and under 10.5W draw: recovers automatically from abnormal states.
