DSPPA D6269 Conference Cross Connector with 1 Input and 3 Outputs

35.08

Product description


The DSPPA D6269 is a cross connector with one male input and three female outputs, all high-density 8-core. It splits one line from the host into two microphone branches and a third leg for an extension cable, which suits U-shaped and T-shaped table layouts.

====

The DSPPA D6269 is a small part that solves a common meeting-room problem: one line leaves the host, but the microphones sit in more than one direction. The cross connector has one male input and three female outputs, all high-density 8-core connectors from the D62 range. DSPPA describes it as being for shunt, or branch, connections in conference systems.

DSPPA D6269 specifications

From DSPPA's official datasheet:

  • Input: one high-density 8-core connector, male.
  • Outputs: three high-density 8-core connectors, female.
  • The male input connects toward the conference host.
  • The left and right outputs connect to conference units.
  • The top output connects to an extension cable.

When a chain needs to branch

In a daisy chain the line runs from one microphone to the next until the end of the table. That works for a straight table. U-shaped and T-shaped layouts, or a platform between two rows, force a single chain to loop around the room on a long cable. With a D6269 you place a split point in the middle: one branch goes to the right wing, one to the left wing, and the top output carries on to another table through an extension cable.

Saudi room examples

  • A Riyadh boardroom with a U-shaped table: the cable arrives from the rack at the head of the table and both wings branch from there.
  • A municipal council hall with the chair's platform in the centre and member rows on each side.
  • A hotel conference room in Madinah with separate table groups that move between events, a split point under each group.
  • A T-shaped university meeting room, chair on the cross table and members along the stem.

What the cross connector does not do

The D6269 distributes cabling. DSPPA lists no power input for it, so it adds no power to the microphones and does not raise the number of units the host accepts. For long runs or crowded branches, add a D6239 power extender rated at 350W.

Fitting it into the system

An extension cable runs from a host output to the connector's input; use a D6263 at 20m if the equipment room is far away. D6221 and D6222 units then plug into the two side outputs, and a D6260 or D6263 leaves the top output for the next table group.

Where to place the split point

Mount the connector under the middle of the table, or wherever the seating branches, so both wings get similar cable lengths. Keep each plug facing the direction its cable leaves. Label the outputs right, left and onward; when one microphone on a wing goes quiet, you know where to start checking.

D6269 or the D6260, D6263 and D6266 cables?

  • D6269: a branching connector, one male input and three female outputs.
  • D6260 and D6263: male-to-female extension cables, 2m and 20m, that lengthen a single line without branching.
  • D6266: a male-to-male cable, 2m by default, for joining two female sockets such as the host and a power extender.

Frequently Asked Questions

Does the D6269 need power?

DSPPA lists no power input. It only distributes cabling; power comes from the host or a D6239 power extender.

Does it let the system take more microphones?

No, it only changes the wiring layout. The host handles 128 units directly.

Which output do the microphones use?

Per DSPPA's datasheet, the left and right outputs go to units, the top output to an extension cable, and the male input faces the host.

Specifications

  • Model: D6269
  • Official name: D62 Series Conference Cross Connector
  • Function: Shunt (branch) connection in conference systems
  • Input: 1 × 8-core high-density connector, male
  • Outputs: 3 × 8-core high-density connectors, female
  • Port layout: Male input to host; left and right outputs to conference units; top output to extension cable
  • System: DSPPA D62 intelligent conference series

Features

  • 1 male input, 3 female outputs: one host line reaches three directions.
  • Left and right outputs for conference units, per DSPPA: both wings of a table branch from one centre point.
  • Top output for an extension cable: carries the line on to another table or row.
  • High-density 8-core connectors: same interface as D6260/D6263 cables and D62 units.
  • Distribution only: DSPPA lists no power input, so it sits under a table without a socket.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌