Huawei AR280 Multi-Service Router with 41W PoE+ and 2.5GE WAN

527.47

Product description


The Huawei AR280 is a HUAWEI eKit multi-service router with a 2.5GE WAN port and four gigabit LAN ports that deliver PoE+ from a 41 W budget. It supports up to 150 clients and manages 16 access points, a good match for shops and branches that run Wi-Fi from ceiling APs.

====

The Huawei AR280 is built around one practical idea: the router powers your access points and manages them too. It has a 2.5GE WAN port and four gigabit LAN ports with PoE+ sharing a 41 W budget, and it supports up to 150 connected clients. Huawei places it in the HUAWEI eKit line as a multi-service router for small and mid-sized businesses.

Huawei AR280 at a glance

  • One 2.5GE WAN port for fast fibre plans.
  • Four gigabit LAN ports with PoE+, 41 W maximum PoE output.
  • Up to 150 clients, 16 managed access points and 32 managed devices.
  • 2 Gbps egress bandwidth.
  • 16 IPsec tunnels with up to 200 Mbps VPN throughput.
  • 5.8 W typical power draw, up to 49 W with the PoE budget fully used.

PoE+ straight from the router

In a small shop or branch, every ceiling access point normally needs a PoE switch or a power adapter near the ceiling. With the AR280, one network cable from the router carries both data and power to the AP. Keep in mind that the 41 W budget is shared across all ports, so check each device's power draw on its official page before you install. If you add more APs or cameras, put a PoE switch such as the S210-8P2J behind the router and let the AR280 handle routing and control.

One place to manage APs and the network

The AR280 manages up to 16 access points, twice the AR180's figure. Set the network name and password once and push them to every AP instead of logging in to each one. It also manages up to 32 devices, which suits a branch with APs, a switch and IP phones.

Typical uses in Saudi Arabia

  • A fashion or fragrance store in a Riyadh mall with two ceiling APs and a POS terminal.
  • A restaurant or coffee shop offering guest Wi-Fi indoors and on the terrace.
  • A company branch in Al Khobar linked to head office over an encrypted VPN tunnel.
  • A real estate or car rental office with 20 to 50 staff and visitors.

Installation

The AR280 is fanless and cools naturally. It weighs 0.93 kg, measures 35 × 195 × 130 mm and goes on a desk or a wall, in a network room or behind the counter. It runs from an external AC adapter rated 100 to 240 V and is specified for up to 40°C, so keep it in an air-conditioned spot out of direct sun.

AR280 or AR180?

Both have the same ports and speeds: 2.5GE WAN, four gigabit LAN, 2 Gbps egress and 200 Mbps VPN throughput. The AR280 adds 41 W of PoE+, 150 clients, 16 managed APs and 16 IPsec tunnels. The AR180 gives you Wi-Fi 7 from the router itself for 100 clients, 8 managed APs and 8 tunnels, without PoE. Need more than one internet line or a 10GE port? Look at the AR580 series.

Frequently Asked Questions

How many access points can the Huawei AR280 power?

It depends on each AP's draw. The AR280 has four PoE+ LAN ports sharing a 41 W budget, so add up your devices' power figures from their official pages and keep the total under 41 W.

Will the AR280 work with an STC or Mobily fibre router?

Yes. Connect its 2.5GE WAN port to the ISP's fibre unit or modem, and the AR280 takes over routing and network management.

Specifications

  • Model: AR280
  • Product line: HUAWEI eKit (eKitEngine AR280 2.5GE multi-service router)
  • Part number: 50010846
  • WAN ports: 1 × 2.5GE RJ45 (2.5G/1G/100M/10M)
  • LAN ports: 4 × GE RJ45 (1G/100M/10M) with PoE+
  • PoE: Supported, PoE+ with max output 41 W
  • Egress bandwidth: 2 Gbps
  • Connected terminals: 150
  • Managed APs: 16
  • Managed devices: 32
  • IPsec tunnels: 16
  • VPN forwarding performance: 200 Mbps
  • Power supply: External AC power adapter (1 power module)
  • Input voltage: Rated 100–240 V AC, 50/60 Hz; range 90–264 V AC, 45–65 Hz; max input current 0.9 A
  • Power: Max adapter output 50 W; max consumption 49 W (incl. 41 W PoE); typical 5.8 W
  • Cooling: Natural cooling, fanless, overtemperature alarm
  • Dimensions without packaging (H × W × D): 35 × 195 × 130 mm (max 35 × 195 × 136 mm)
  • Weight: 0.93 kg without packaging
  • Chassis height: 0.8 U
  • Installation: Desktop or wall mount
  • Operating temperature: 0°C to 40°C (derate 1°C per 220 m above 1800 m)
  • Storage temperature: -40°C to 70°C
  • Operating humidity: 5% to 95% RH, non-condensing
  • Operating altitude: Below 5000 m
  • Certifications: Safety: IEC/EN/UL 62368-1, GB 4943.1, CSA C22.2 No. 62368-1, AS/NZS 62368-1; EMC: EN 55032, EN 55035, EN 300 386, EN 61000-3-2, EN 61000-3-3, EN 301 489-1, EN 301 489-17, ICES-003, AS/NZS CISPR32, VCCI-CISPR32, GB/T 9254.1, FCC CFR47 Part 15; Environmental: EN 300 019-2, IEC 60068-2

Features

  • 41 W PoE+ budget: power access points or IP phones over the network cable, no separate adapters.
  • Manages up to 16 APs and 32 devices: the whole branch network runs from one router.
  • Up to 150 connected clients: enough for a busy store or a mid-sized office at peak hours.
  • 2.5GE WAN with 2 Gbps egress bandwidth: the router won't cap your fibre plan.
  • 16 IPsec tunnels at 200 Mbps: encrypted links to head office and other branches.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌