DSPPA MP9821M 4-Channel Main/Standby Amplifier Auto Switcher

1743.49

Product description


The DSPPA MP9821M watches up to four main amplifiers and, if one fails, moves its speaker line to a standby amplifier within 50 ms. It is built for PA systems that cannot go silent, such as evacuation systems in malls and hospitals or the sound system of a large mosque.

====

DSPPA's MP9821M solves a problem every PA operator knows: one amplifier dies and a whole zone goes silent. Part of DSPPA's analog MP98 series, it supervises up to four main amplifiers and, the moment it detects a fault in one of them, moves that speaker line to a standby amplifier within 50 ms. The PA keeps running, and the front panel tells your technician which amplifier needs attention.

DSPPA MP9821M specifications

  • 4 independent channels, each with automatic testing and switching.
  • Configurations: 4 main + 4 standby, or 4 main + 1 standby.
  • Channel capacity: 150 V / 30 A audio.
  • Fault changeover in 50 ms; channel test in 40 ms.
  • AC 220 V / 50 Hz power, fused.

How it detects a failed amplifier

The switcher injects a 30k test signal at 20 to 50 mV through the amplifier and measures what comes out. That is why DSPPA specifies an amplifier gain above 20 dB and an input test voltage threshold below 500 mV. If the test signal does not come back as expected, the amplifier is treated as failed and the channel moves to standby. Channels act on their own, so a fault on the ground-floor amplifier changes nothing on the first floor.

One spare per amplifier, or one spare for all?

In 4 main + 4 standby mode every amplifier has a dedicated backup, which suits evacuation systems where every zone must stay live even if more than one amplifier fails. The 4 main + 1 standby mode saves money and rack space, since a single spare covers whichever amplifier drops out. Choose it when two simultaneous failures are unlikely and budget matters. A mosque with four zones may manage with one shared spare, while a hospital evacuation system is better served by a spare per amplifier.

Panels and wiring

Up front you get the power switch and indicator, volume controls, manual switching buttons and S-AMP (ALM) indicators that light when a channel runs on standby. At the back, each channel has a source input, main and standby amplifier inputs and outputs and a speaker output, plus a link port to pass the signal on. The unit measures 484 × 365 × 88 mm and weighs 7.9 kg net.

Where it earns its place in Saudi Arabia

  • Large mosques and Jama masjids, where Friday khutbah audio cannot drop out because of one amplifier.
  • Evacuation systems in malls and hospitals, keeping every zone able to carry the emergency message.
  • Schools and universities, where paging and bells keep running without waiting for a technician.
  • Airports and hotels with many zones spread across multiple amplifiers.

MP9821M or MP9815E?

Both are MP98 units with the same 484 × 365 × 88 mm chassis and 220 V supply; the difference is the job. The MP9815E creates the emergency audio, a siren or a 60-second recorded message when the fire contact closes. The MP9821M makes no sound at all; it keeps the amplifiers that carry that audio online by switching to standby. A complete analog evacuation rack usually needs both.

Frequently Asked Questions

How many amplifiers does the DSPPA MP9821M supervise?

Up to four main amplifiers, backed by four standby amplifiers or a single shared spare.

How fast is the changeover?

50 ms after a fault is detected, per the datasheet, with a 40 ms test cycle per channel.

Can I switch over manually for maintenance?

Yes. The front panel has manual switching buttons and indicators showing which channels are on standby.

Specifications

  • Model: MP9821M
  • Series: MP98 analog PA system
  • Channels: 4
  • Working configurations: 4 main + 4 standby, or 4 main + 1 standby
  • Channel capacity: 150 V / 30 A (audio)
  • Required amplifier gain: Greater than 20 dB
  • Input test voltage threshold: Below 500 mV
  • 30k test signal output voltage: 20-50 mV
  • Malfunction switch time: 50 ms
  • Channel test time: 40 ms
  • Front panel: Power switch, power indicator, volume controls, manual buttons, S-AMP (ALM) indicators
  • Rear panel: Source input, main amp input and output, standby amp input and output, speaker outputs, link, AC fuse, AC power cord
  • Protection: AC fuse
  • Power requirement: AC 220 V / 50 Hz
  • Unit size (L × W × H): 484 × 365 × 88 mm
  • Net weight: 7.9 kg

Features

  • 4 independent channels: each one checks its own amplifier and switches to standby without touching the others.
  • 50 ms changeover with a 40 ms channel test: the dropout is too short for most listeners to notice.
  • 4 main + 4 standby or 4 main + 1 standby: pick full redundancy or the lower-cost shared spare.
  • 150 V / 30 A per channel: handles high-voltage speaker lines in 100 V PA systems.
  • Manual switching and status LEDs: technicians see which amplifier failed and can switch over for maintenance.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌