Grandstream GWN7672 BE11000 Tri-Band Wi-Fi 7 Access Point

The Grandstream GWN7672 is a BE11000 tri-band Wi-Fi 7 access point covering 2.4GHz, 5GHz and 6GHz, with 11 Gbps aggregate wireless throughput and up to 384 clients. Two 5G Ethernet ports and PoE+ power suit busy offices, schools and retail spaces.

====

The Grandstream GWN7672 brings tri-band Wi-Fi 7 to the GWN7600 range, running 2.4GHz, 5GHz and 6GHz radios at the same time. Rated BE11000, it delivers 11 Gbps of aggregate wireless throughput and supports up to 384 clients. Grandstream positions it for medium to high density sites such as office floors, schools and large stores.

Grandstream GWN7672 speed per band

Every radio runs 2x2:2 MIMO. Official figures:

• 2.4GHz: up to 688 Mbps on 20/40 MHz channels.
• 5GHz: up to 4320 Mbps with channels up to 240 MHz.
• 6GHz: channels up to 320 MHz.
• 48 SSIDs (16 per radio) and up to 175 m coverage.

Why the 6GHz band matters

2.4GHz is crowded with Bluetooth gadgets and legacy devices, and 5GHz is shared with every neighbor in a commercial building. 6GHz is fresh spectrum that only Wi-Fi 6E and Wi-Fi 7 phones and laptops can use, so they get wide channels up to 320 MHz with far less interference. MLO lets a compatible device link over more than one band at once, and 4K-QAM raises the data carried per transmission. Grandstream notes that available bands vary by region.

Two 5G ports, because gigabit is not enough

Up to 11 Gbps over the air needs a matching wired link. The GWN7672 carries two 5G WAN/LAN ports for 10 Gbps of wired capacity; pair it with a Multi-Gigabit PoE+ switch to get the full benefit. It runs on 802.3at PoE+, adjusts its power use when PoE+ is detected and draws no more than 25 W.

Management and security

• Embedded controller for up to 50 local APs.
• Free GDMS Networking cloud with no AP limit.
• GWN Manager on-premise software for up to 50,000 APs.

Hardware security includes secure boot, a unique certificate and random password per unit, and WPA3. Bluetooth LE 5.3 and a Kensington lock slot are also on board.

Compatibility with existing devices

Older gear is not left behind: the GWN7672 supports every generation from 802.11b to Wi-Fi 7, so legacy devices stay on 2.4 or 5GHz while new phones move to 6GHz. It joins an existing Grandstream Wi-Fi 6 deployment under the same GDMS account or embedded controller, with VLAN, 802.1X and WMM for segmentation and voice priority.

Who it suits in Saudi Arabia

• Office floors in Riyadh and Khobar towers, where neighboring companies crowd the 5GHz band.
• Schools and universities with modern tablets and laptops in every class.
• Large shops and showrooms running separate guest and point-of-sale networks.
• Design and video studios moving large files over Wi-Fi.

GWN7672, GWN7674 or GWN7670?

Against the dual-band GWN7670, the GWN7672 adds 6GHz and lifts throughput from 3.6 to 11 Gbps, clients from 256 to 384, and port speed from 2.5G to 5G. The GWN7674 goes further with 4x4:4 on 5GHz and 6GHz, 21 Gbps, 768 clients and 10G plus 2.5G ports, but it needs 802.3bt PoE++. The GWN7672 is the middle ground: 6GHz on a standard PoE+ switch.

Frequently Asked Questions

Does the GWN7672 need a special switch?

It runs on 802.3at PoE+ (25 W max). A Multi-Gigabit switch makes full use of its 5G ports.

Can every phone use the 6GHz band?

No. Only Wi-Fi 6E and Wi-Fi 7 devices see 6GHz; older devices connect on 2.4GHz or 5GHz.

How many clients does the GWN7672 support?

Up to 384 concurrent clients across 48 SSIDs (16 per radio).

Specifications

• Model: GWN7672
• Series: GWN7600 (indoor Wi-Fi 7)
• Wi-Fi class: BE11000
• Wi-Fi standards: 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7)
• Antennas: 7 single-frequency antennas: 2x 3.5 dBi (2.4GHz), 2x 5.5 dBi (5GHz), 2x 5.5 dBi (6GHz), 1x 3.5 dBi (Bluetooth)
• MIMO: 2x2:2 on 2.4GHz, 5GHz and 6GHz
• Maximum data rates: 2.4GHz: 802.11be up to 688 Mbps, 802.11ax up to 574 Mbps; 5GHz: 802.11be up to 4320 Mbps, 802.11ax up to 2402 Mbps
• Aggregate throughput: 11 Gbps wireless, 10 Gbps wired
• Frequency bands: 2400-2483.5 MHz; 5150-5850 MHz; 5945-7125 MHz (not all bands available in all regions)
• Channel bandwidth: 2.4GHz: 20/40 MHz; 5GHz: 20/40/80/160/240 MHz; 6GHz: 20/40/80/160/320 MHz
• Wi-Fi 7 features: MLO, 4K-QAM, MRU
• Coverage range: Up to 175 m depending on environment
• Maximum TX power: 2.4GHz: 26 dBm; 5GHz: 25 dBm; 6GHz: 24 dBm (varies by country, band and MCS)
• Receiver sensitivity: -96 dBm @1 Mbps (802.11b); -92 dBm @6 Mbps (802.11a); -52 dBm 802.11be 160 MHz (5GHz); -47 dBm 802.11be 320 MHz (6GHz)
• SSIDs: 48 total, 16 per radio
• Concurrent clients: 384
• Network ports: 2x 5G Ethernet RJ45 (WAN/LAN)
• Auxiliary ports: 1x reset pinhole, 1x Kensington lock
• Bluetooth: BLE 5.3
• Mounting: Indoor wall or ceiling mount, kits included
• LEDs: 1 tri-color LED for device tracking and status indication
• Network protocols: IPv4, IPv6, 802.1Q, 802.1p, 802.1x, 802.11e/WMM
• QoS: 802.11e/WMM, VLAN, TOS
• Security: WEP, WPA/WPA2-PSK, WPA/WPA2 Enterprise (TKIP/AES), WPA3; secure boot, digitally signed critical data/control lockdown, unique security certificate and random default password per device
• Network management: Embedded controller for up to 50 local APs; GDMS Networking free cloud platform, unlimited APs; GWN Manager on-premise controller for up to 50,000 APs
• Power: PoE+ 802.3at, auto power adapting on PoE+ detection; max consumption 25 W
• Operating temperature: 0°C to 45°C
• Storage temperature: -30°C to 60°C
• Humidity: 10% to 90% non-condensing
• Dimensions and weight: 220 x 220 x 54 mm, 838.4 g
• In the box: GWN7672 Wi-Fi 7 AP, mounting kits, quick start guide
• Compliance: FCC, CE, RCM, IC

Features

• Three bands, 11 Gbps total (BE11000): 688 Mbps on 2.4GHz and 4320 Mbps on 5GHz, plus the 6GHz band.
• 6GHz with channels up to 320 MHz: clean spectrum for new devices, away from crowded 2.4 and 5GHz.
• Two 5G Ethernet ports, 10 Gbps wired: uplinks that keep up with all three radios.
• 384 concurrent clients and 48 SSIDs: capacity for a full office floor.
• 802.3at PoE+ with 25 W maximum draw: runs from a PoE+ switch, no power adapter needed.