Uniview NSW2100-6GT-POE-IN Gigabit Switch with 4 PoE Ports, 65W

The Uniview NSW2100-6GT-POE-IN is a small gigabit switch with six ports, four of them PoE on a 65W budget, managed through an app (Lite Cloud Managed). It suits small offices, clinics and villas with modern access points or cameras that need VLANs and per-port control.

====

The Uniview NSW2100-6GT-POE-IN is for small sites that need gigabit speed and real control over the network, not just a box that passes traffic. It packs six 10/100/1000 Mbps ports, four of them PoE on a 65W budget, and it is Lite Cloud Managed, meaning you manage it from an app instead of leaving it as a black box in the cabinet.

Uniview NSW2100-6GT-POE-IN key specifications

Key figures:

• 4 gigabit PoE ports plus 2 gigabit non-PoE ports.
• 65W total PoE budget, up to 30W per port.
• IEEE 802.3af and 802.3at, with both Mode A and Mode B.
• 12 Gbps switching capacity, 8.92 Mpps forwarding.
• Built-in 100-240V power supply, so no external brick.

Why gigabit ports matter

A modern Wi-Fi 6 access point easily moves more than 100 Mbps. Plug it into a Fast Ethernet switch and the port becomes the bottleneck. The same applies to an NVR pulling streams from several cameras at once. With 12 Gbps of switching capacity, all six ports can run at full speed together. Need more bandwidth to the router or recorder? Bundle ports with link aggregation: two groups, up to four ports in total.

App management for PoE, VLANs and security

The app shows PoE status on every port and lets you cut and restore power, so a frozen camera or access point can be rebooted without a ladder.

• Up to 6 VLANs: one for cameras, one for staff, one for guests.
• Port isolation stops devices from seeing each other.
• Loop detection flags a cable accidentally plugged between two ports.
• N:1 port mirroring copies traffic to one port for troubleshooting.
• Up to 32 static MAC entries, plus config import/export and firmware upgrades.

Where it fits in KSA

• Small office or branch: a ceiling access point, two IP phones and an NVR, with a VLAN keeping cameras off the staff network.
• Clinic or salon: customer Wi-Fi isolated from reception PCs.
• Two-storey villa: one access point per floor plus two cameras, each rebootable from your phone.

Installation

The unit measures 169 x 132 x 40 mm and weighs 0.65 kg. It is fanless, so it stays quiet in an office. Rated for 0 to 45°C, it has a power LED that turns from green to yellow when PoE draw passes 85% of the budget.

NSW2100-6GT-POE-IN or NSW2020-6T-POE-IN?

Same port count and same four PoE ports; everything else differs. The NSW2100 is gigabit with 12 Gbps capacity versus 100 Mbps and 1.2 Gbps, carries a 65W budget versus 60W, has an internal power supply and is app-managed. The NSW2020-6T-POE-IN is unmanaged but offers a 250m Extend mode. Pick the NSW2100 for offices and access points, the NSW2020 for simple cameras on long runs.

Frequently Asked Questions

Is the NSW2100-6GT-POE-IN a managed switch?

Yes. It is Lite Cloud Managed. The app covers PoE per port, up to 6 VLANs, port isolation, loop detection and firmware upgrades.

Can it power four access points?

It depends on their draw. The budget is 65W in total and 30W per port, so four APs work if their combined consumption stays under 65W.

Does it use an external power adapter?

No. The 100-240V power supply is built in, so it connects straight to a power cord.

Specifications

• Model: NSW2100-6GT-POE-IN
• Series: NSW2100 Lite Cloud Managed Gigabit Ethernet PoE Switch
• Ports: 4 x 10/100/1000Mbps PoE RJ45 + 2 x 10/100/1000Mbps RJ45
• Switching capacity: 12 Gbps
• Forwarding performance: 8.92 Mpps
• Packet buffer: 1 Mbit
• MAC address table: 2K
• Priority ports: 1 to 2
• Standards: IEEE 802.3, 802.3u, 802.3z, 802.3ab, 802.3x, 802.3af, 802.3at
• Power supply: AC 100-240V, 50/60Hz
• PoE standards: IEEE 802.3af, IEEE 802.3at
• PoE mode: Mode A (1236), Mode B (4578)
• Max PoE power: 65W total, 30W per port
• Max power consumption: 70W
• Cooling: Fanless (0 fans)
• Dimensions (W × D × H): 169 × 132 × 40 mm
• Weight: 0.65 kg
• Operating temperature: 0°C to 45°C (32°F to 113°F)
• Operating humidity: 10% to 90% (non-condensing)
• Indicators: Power: green normal, yellow when PoE exceeds 85%; Link/Act
• Ethernet: Full/half duplex and auto-negotiation, port enable/disable, rate setting, flow control, port statistics, 2 link aggregation groups (up to 4 ports)
• VLAN: Up to 6 VLANs, IDs 1-4094
• Static MAC: Up to 32
• PoE management: View PoE status and enable/disable PoE per port in the app
• Security: Loop detection, port isolation
• Maintenance: N:1 port mirroring, firmware upgrade, factory reset, config import/export, restart
• System: View name, firmware, IP, MAC, DNS; edit IP and device name
• NDAA compliance: Yes

Features

• Six 10/100/1000 ports: full gigabit for modern access points and the NVR uplink.
• 4 PoE ports, 65W budget, up to 30W per port: power APs and cameras over Ethernet.
• App management: check PoE status and toggle power per port to reboot a frozen device remotely.
• Up to 6 VLANs plus port isolation: keep cameras apart from staff or guest traffic.
• Link aggregation, 2 groups and up to 4 ports: combine links for more bandwidth to the router or NVR.