DSPPA D5822 UHF Wireless Lavalier System with 2 Bodypacks

1687.14

Product description


The DSPPA D5822 pairs a dual-channel true diversity UHF receiver with two lavalier mics and two belt-pack transmitters. It suits teachers, trainers and lecturers who need both hands free while they talk.

====

The DSPPA D5822 is a wireless lavalier kit for people who talk while their hands are busy: a teacher at the whiteboard, a trainer clicking through slides, or a sheikh giving a seated lesson. In the box you get a dual-channel true diversity receiver, two clip-on mics and two belt-pack transmitters. Each transmitter runs more than 8 hours on two AA batteries.

What comes in the DSPPA D5822 kit

According to DSPPA, the system includes:

  • One two-channel receiver.
  • Two lavalier mics that clip to a shirt or thobe.
  • Two bodypack transmitters, one for each mic.

Two presenters can use it at once, each on an independent channel.

A light belt-pack transmitter

The transmitter weighs just 0.1kg and measures 110×64×25mm without the antenna, so it sits on a belt or in a pocket without pulling. It carries a quarter-wave whip antenna, transmits at 14dBm and has a screen that shows frequency and battery status, so you can swap cells before class starts.

The input gain control is the useful detail here. Turn it down for a loud speaker so the voice does not distort, or up for a soft-spoken one, before the signal ever reaches the amplifier. Power comes from two AA alkaline cells, good for more than 8 hours.

Receiver: 200 channels, two antennas

  • Frequency range 632 to 695.25MHz in 250KHz steps.
  • 200 channels with PLL digital frequency locking.
  • Infrared pairing between the receiver and each transmitter.
  • Sensitivity of -95dBm or better, BNC antenna input at 50 ohms.
  • 120Hz to 15KHz audio response, signal-to-noise ratio above 70dB.

Because the receiver listens on two antennas and uses the stronger signal at any moment, dropouts are less likely when the lecturer walks between desks or steps away from the podium.

Outputs and controls

Each channel has a balanced XLR output, and a 6.35mm jack mixes both channels for a single run to an amplifier. A switch next to it sets the level to LINE (150mV) or MIC (7mV). The receiver display shows frequency, group, signal strength and volume, with separate volume control per channel. It runs on DC 12V at 600mA, measures 483×196×44mm and weighs 2.3kg.

Where lavalier mics work best in KSA

  • Classrooms and school theaters.
  • Corporate and government training rooms.
  • Mosque study circles where the speaker sits throughout.
  • Product presentations at exhibitions and events.

Do you need an antenna amplifier?

In a single mid-size room, the receiver's own antennas are enough. If several receivers sit in a rack far from the hall, the DSPPA D5828C feeds one antenna pair to 8 BNC outputs.

D5822, D5821 or D5824?

All three share the same receiver; the microphone is the only difference. The D5822 uses lavalier mics on 0.1kg belt-packs at 14dBm with 8+ hours of runtime. The D5821 uses 0.45kg handheld mics with 14 or 6dBm power and 10+ hours, better for someone who holds the mic and moves through the audience. The D5824 uses gooseneck desktop mics that stay on the table.

Frequently Asked Questions

Is the DSPPA D5822 belt-pack heavy?

No. It weighs 0.1kg and measures 110×64×25mm without the antenna, so it clips to a belt or slips into a pocket.

How long does the lavalier transmitter run?

More than 8 hours on two AA alkaline cells, and the display shows battery status.

Can two people use it at the same time?

Yes. The receiver has two channels, and each mic has its own transmitter, channel and XLR output.

Specifications

  • Model: D5822
  • System configuration: 1 receiver + 2 lavalier mics + 2 bodypack transmitters
  • Frequency range: 632-695.25MHz
  • Channels: 200
  • Frequency step: 250KHz
  • Dynamic range: 82dB
  • Max frequency deviation: ±45KHz
  • Audio frequency response: 120Hz-15KHz (±3dB)
  • Signal-to-noise ratio: Greater than 70dB
  • Total harmonic distortion: ≤1%
  • Operating temperature: -10°C to +40°C
  • Antenna interface: BNC / 50Ω
  • Receiver sensitivity: ≤-95dBm
  • Receiver display: Screen showing frequency, group, RF signal and volume level
  • Receiver technology: Dual-channel True Diversity with PLL digital frequency locking and IR frequency pairing
  • Audio outputs: 2 balanced XLR outputs (one per channel) + 6.35mm mixed output for both channels
  • Mixed output level switch: LINE: 150mV / MIC: 7mV
  • Receiver power supply: DC 12V, 600mA
  • Receiver dimensions: 483×196×44mm
  • Receiver weight: 2.3kg
  • Transmitter antenna: ¼-wave whip antenna
  • RF output power: 14dBm
  • Spurious suppression: -60dB
  • Transmitter power supply: 2 × AA 1.5V alkaline batteries
  • Battery life: Over 8 hours
  • Transmitter display: Shows frequency and battery status
  • Gain control: Adjustable input gain on the transmitter
  • Transmitter dimensions: 110×64×25mm (excluding antenna)
  • Transmitter weight: 0.1kg

Features

  • 0.1kg belt-pack measuring 110×64×25mm: clips to a belt or pocket and stays out of the way for a full session.
  • Over 8 hours on two AA cells: enough for a training day or a full school day on one set of batteries.
  • Input gain control on the transmitter: match the mic level to a soft or loud voice.
  • 200 UHF channels with dual-antenna reception: steady audio as the speaker moves around the room.
  • Two XLR outputs and a 6.35mm mix out at LINE 150mV or MIC 7mV: connects to a mixer or straight to an amplifier.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌