DSPPA DSP168E PoE Ceiling Speaker with 25W Built-in Amplifier

1018.50

Product description


The DSPPA DSP168E is a network ceiling speaker with its own digital amplifier: 25W on PoE++ or a 24V DC supply, 15W on PoE+. It suits corridors, waiting areas and offices that want background music and paging over a network cable, without a central amplifier rack or long speaker runs.

====

The DSPPA DSP168E puts a speaker and a digital amplifier into one ceiling-mounted unit that takes both audio and power from a single network cable. Connect it to a PoE++ switch port and it delivers its full 25W; on PoE+ it runs at 15W. For hotel corridors, clinic waiting rooms and office floors, that removes the central amplifier rack and the long speaker cable runs a traditional system needs.

DSPPA DSP168E specifications at a glance

These figures come from DSPPA's official datasheet.

  • Power: 25W on PoE++ (802.3bt) or a DC24V/2A supply, 15W on PoE+ (802.3at).
  • Sensitivity: 89±3dB (1W, 1m).
  • Maximum SPL: 102±3dB at 1m.
  • Speaker frequency response: 44Hz to 20kHz.
  • Distortion of 1% or less, signal-to-noise ratio of 76dB or more.

Why choose a PoE speaker?

A conventional 100V system needs an amplifier in the rack and a speaker line pulled to every room. The DSP168E receives audio digitally over the same network your computers and cameras already use, and its built-in amplifier drives the speaker locally. Adding a speaker later means adding a network point, nothing more.

Check your switch before you buy. A PoE+ port gives 15W, which is plenty for an office or meeting room. For the full 25W you need a PoE++ port, or you can use the DC24V input with the power cable supplied in the box.

Built for music as well as announcements

A 44Hz to 20kHz range is wider than a typical paging speaker, so background music keeps its low end instead of sounding thin. The speaker plays background music, emergency paging and alarm signals sent from the system host. Its amplifier protects itself against overheating and short circuits, and the injection-molded engineering plastic housing resists warping and discoloration.

Where it fits in Saudi buildings

  • Hotels and serviced apartments in Makkah and Madinah: corridors and lobbies with soft music and guest announcements.
  • Clinics and hospitals: waiting areas and patient calling.
  • Offices and branches: background music and internal announcements.
  • Networked schools: classroom and corridor broadcasts.
  • Shops and malls: in-store music and promotion announcements.

Installation and compatibility

The unit measures Ø233 x 170 mm, so confirm there is at least 170 mm of depth above the false ceiling. A DC24V power input cable and a network cable come in the box. DSPPA describes LAN broadcast and paging support. If you plan several speakers at 25W each, pick a PoE++ switch whose total power budget covers all of them.

DSP168E or the DSP270E horn?

Both DSPPA speakers run on PoE+, PoE++ or 24V DC, and both drop to 15W on PoE+. The DSP168E is an indoor ceiling speaker: 25W, 44Hz to 20kHz for music, 102dB maximum SPL and a 2A DC supply. The DSP270E is a horn for open areas: 50W, up to 121dB, a 300Hz to 5kHz voice-focused range, a 2.5A DC supply and officially listed SIP support. Indoors with music, choose the DSP168E; for yards and car parks, choose the DSP270E. If the building already runs a MAG6000 system and has mains power above the ceiling, the AC-powered MAG6311 ceiling speaker with USB and SD playback is the alternative.

Frequently Asked Questions

Does the DSP168E work on a standard PoE+ switch?

Yes. On PoE+ (802.3at) it runs at 15W. For the full 25W you need a PoE++ (802.3bt) port or a DC24V/2A supply.

Do I need a separate amplifier?

No. The built-in digital amplifier takes audio from the network and drives the speaker directly.

What comes in the box?

According to DSPPA: the speaker, a DC24V power input cable and a network cable.

Specifications

  • Model: DSP168E
  • Type: PoE network ceiling speaker with built-in digital amplifier
  • Power supply: PoE+ (802.3at), PoE++ (802.3bt) or DC24V/2A
  • Rated power (RMS): 15W on PoE+, 25W on PoE++, 25W on DC24V
  • Acoustic sensitivity (1W/1m): 89±3dB
  • Max SPL (1m): 102±3dB
  • Acoustic frequency response: 44Hz-20kHz
  • Amplifier frequency response (network playback): 80Hz-16kHz (±3dB)
  • Playback sensitivity: -10dB
  • Distortion: ≤1%
  • SNR: ≥76dB
  • Protection: Over-temperature and short-circuit protection
  • Network: LAN broadcast and paging
  • Housing: Injection-molded engineering plastic
  • Product size: Ø233 × 170 mm
  • Net weight: 2.25 kg
  • Accessories: DC24V power input cable, network cable

Features

  • Up to 25W: full 25W on PoE++ (802.3bt) or 24V DC, 15W on PoE+ (802.3at) if your switch stops at PoE+.
  • One cable: the network run carries audio and power together, so there is no central amplifier and no 100V speaker line to pull.
  • 44Hz to 20kHz response: wide enough for background music, not just announcements.
  • 102±3dB max SPL at 1m: clear coverage for waiting halls, corridors and open-plan offices.
  • Self-protecting amplifier: temperature and short-circuit protection, distortion of 1% or less and SNR of 76dB or more.

Questions you might have

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌