DSPPA D6692 12x12 Audio Matrix Processor with 40-bit DSP
5203.60ر.س
Product description
The DSPPA D6692 is a 12-input, 12-output digital audio matrix that takes every microphone and source in a large room and routes it to speakers and recording feeds, each path tuned on its own. It is aimed at large conference rooms, courtrooms, auditoriums and multi-purpose halls.
====
The DSPPA D6692 is a 12-input, 12-output digital audio matrix built for rooms where many microphones and many destinations are live at the same time. Every microphone lands on its own input, and every output can feed a speaker zone, a recorder or a video conferencing system, each with its own settings. DSPPA positions it for meeting rooms of all sizes, courtrooms, auditoriums and multi-purpose halls.
What the DSPPA D6692 can do
- 12 analog inputs and 12 analog outputs with a full matrix.
- 40-bit floating-point DSP at 400 MHz with 24-bit/48 kHz conversion.
- SNR of 111 dB or better and 118 dB converter dynamic range.
- 20 Hz to 20 kHz frequency response within ±0.3 dB, crosstalk of -100 dB or lower.
Example: a boardroom with 12 sources
Take a boardroom with 8 table microphones, 2 wireless mics for the audience, and two audio lines from the PC and the video conferencing codec. That is 12 sources, all going into the D6692. On the output side you might send one mix to the ceiling speakers, a second mix without the far-end audio back to the codec, a third to the recorder and a fourth to an interpreter booth or an overflow room. The matrix decides what each output receives.
Tuning tools and live metering
- AGC that brings a loud talker and a quiet one on the same table closer together.
- EQ, noise gate, compressor and limiter on each channel.
- Crossover for subwoofers in auditoriums.
- Output delay from 0 to 1500 ms in 0.02 ms steps.
- Input sensitivity in 14 steps of 3 dB, up to 42 dB of gain.
The setup page shows live levels for every channel, so you can see which mic is open and which output is near its ceiling before the audience hears distortion.
Control and presets
The unit stores 60 presets: one for a conference, one for a lecture, one for a ceremony. GPIO switches up to 8 scenes, and RS232 and RS485 commands link it to the room's central control. Configuration runs from a driver-free web page over RJ45, or from a handheld device through a Wi-Fi login page.
Where it fits in Saudi Arabia
- Conference halls in hotels, government offices and large companies.
- Courtrooms and municipal council chambers.
- Theaters and multi-purpose university halls.
- Large jami mosques that need many inputs and many zones.
D6692, D6648 or D6696?
DSPPA lists the same DSP, audio performance and 60 presets for the D6692 and the D6648. The difference is channels: the D6648 has 4 inputs and 8 outputs for a few sources and many zones, while the D6692 has 12 inputs and 12 outputs for rooms full of microphones. If you need more than 12 inputs, the DSPPA D6696 is a 16x16 matrix.
Frequently Asked Questions
How many microphones can the DSPPA D6692 take?
It has 12 analog inputs, so up to 12 microphones or sources, routed to 12 outputs through a full matrix.
How is the D6692 different from the D6648?
Published DSP, performance and 60 presets are the same. The difference is channels: 12x12 on the D6692 against 4 inputs and 8 outputs on the D6648.
Can I watch levels during an event?
Yes. The setup page shows real-time signal levels for each channel, so you can monitor mics and outputs from a PC.
Specifications
- Model: D6692
- Inputs × outputs: 12 × 12
- I/O type: Analog
- Signal processor: 40-bit floating-point DSP, 400 MHz
- Bit depth: 24-bit
- Sampling frequency: 48 kHz
- Input impedance: <10 kΩ
- Output impedance: 200 Ω
- A/D dynamic range: 118 dB
- D/A dynamic range: 118 dB
- Max input level: +18 dBu
- Max output level: +18 dBu
- Transmission delay: 4.1 ms
- Output channel delay: 0 to 1500 ms (0.02 ms steps)
- THD+N: ≤0.005% (+4 dBu, 1 kHz)
- Frequency response: 20 Hz to 20 kHz, ±0.3 dB
- CMRR: ≥55 dB
- Crosstalk: ≤-100 dB
- SNR: ≥111 dB (20 Hz to 20 kHz)
- Dynamic range: ≥111 dB (20 Hz to 20 kHz)
- Noise floor: ≤-93 dBu (20 Hz to 20 kHz)
- Input sensitivity: 14 steps of 3 dB, up to 42 dB gain
- DSP functions: Input/output gain, noise gate, EQ, matrix mixing, crossover, delay, compressor, limiter, AGC
- GPIO: 8-channel scene switching
- Connection / control: TCP/IP (driver-free web page over RJ45), RS232, RS485
- Presets: 60
- Interface language: English or Chinese
- Level display: Real-time level display
Features
- 12 inputs and 12 outputs with full matrix: every mic in the room gets an input, every zone or device its own output.
- Real-time level display: see from the setup page which mic is open and which output is close to its limit.
- AGC, EQ, gate, compressor and limiter: even levels between speakers along a long conference table.
- 60 presets and 8 GPIO scenes: one hall runs a conference, a lecture or a ceremony at the press of a button.
- Up to 1500 ms delay per output: distant speakers stay in sync in deep auditoriums.
